Physics › Section S · Vision, instruments, and wave optics › Topic S.7

Polarization

Light is a transverse wave, so its vibrations have a direction as well as a size. Filters that select that direction cut the glare off a lake, darken a blue sky in photographs and make every LCD screen work.

A wave with a direction

Light is an electromagnetic wave: electric and magnetic fields oscillating at right angles to the direction the wave travels. The direction in which the electric field oscillates is called the direction of polarisation. Think of waves on a rope passing through a gap in a fence. Shake the rope up and down and the waves pass through a vertical gap; shake it side to side and the gap stops them. Only transverse waves can be polarised in this way. Sound in air is longitudinal, its vibrations along the direction of travel, so it has no polarisation, and the fact that light can be polarised is strong evidence that light is transverse.

Unpolarised light and polarising filters

Sunlight, flames and ordinary bulbs give out unpolarised light: a jumble of waves whose electric fields point in every direction across the beam, changing at random. A polarising filter passes only the part of the electric field along one direction, its transmission axis. A common type contains long, aligned molecules. Electrons can move easily along these molecules, so the field component parallel to them is absorbed, while the component perpendicular to them passes. The transmission axis is therefore perpendicular to the molecules. Light leaving an ideal filter is completely polarised along its axis. Unpolarised light through one ideal filter keeps exactly half its intensity, \(I = I_0/2\), whichever way the filter is turned, because on average the random fields have equal parts along and across the axis.

Malus's law

Now send light that is already polarised through a second filter, often called the analyser, whose axis makes an angle \(\theta\) with the polarisation direction. The electric field \(E_0\) splits into a component along the axis, \(E_0\cos\theta\), which passes, and a component across it, which is absorbed. Intensity is proportional to amplitude squared, so the transmitted intensity is

I = I_0\cos^2\theta

This is Malus's law, where \(I_0\) is the intensity of the polarised light arriving at the filter. At \(\theta = 0\) all of it passes. At 45° half passes. At 90°, crossed filters, none passes. Remember that Malus's law applies only to polarised light; for unpolarised light use the factor of one half.

Worked example: a third filter lets light through

Unpolarised light of intensity 48.0 W/m² meets two crossed polarisers, with axes vertical and horizontal, so no light gets through. A third filter is slipped between them with its axis 30.0° from the vertical. How much light now emerges? Assume ideal filters. 1. First filter: \(I_1 = 48.0/2 = 24.0\) W/m², polarised vertically. 2. Middle filter, at 30.0°:

I_2 = 24.0\cos^2 30.0^\circ = 18.0\ \text{W/m}^2

now polarised at 30.0°. 3. Last filter: its horizontal axis is 60.0° from the new direction, so

I_3 = 18.0\cos^2 60.0^\circ = 4.50\ \text{W/m}^2

4. Check: adding a filter, which can only absorb, lets light through, because the middle filter turns the polarisation direction part of the way.

Worked example: dimming by rotation

Polarised light passes through a filter. At what angle between the polarisation direction and the filter's axis is the intensity cut to 30.0% of its value? 1. Malus's law with \(I = 0.300I_0\): \(\cos^2\theta = 0.300\). 2. Take the square root: \(\cos\theta = \sqrt{0.300} = 0.5477\). 3. So \(\theta = 56.8^\circ\). 4. Check: the answer is between 45°, which passes 50%, and 60°, which passes 25%, as it should be. Forgetting the square and solving \(\cos\theta = 0.300\) would give 72.5°, a very different angle. This is how a pair of polarisers works as a smooth dimmer: rotating one changes the brightness continuously from full to zero.

Polarisation by reflection

Light reflected from a flat surface such as water, glass or a road is partly polarised, with its electric field mostly parallel to the surface. At one angle of incidence the reflected light is completely polarised parallel to the surface. This is Brewster's angle, given by

\tan\theta_B = \frac{n_2}{n_1}

where \(n_1\) is the index of the medium the light travels in, \(n_2\) that of the reflecting material, and \(\theta_B\) is measured from the normal. At Brewster's angle the reflected and refracted rays are exactly 90° apart. For light in air reflecting from water, \(n_2 = 1.333\) gives \(\theta_B = 53.1^\circ\). The refracted light is only partly polarised, because most of the light enters the surface rather than reflecting.

Worked example: Brewster's angle for glass

Light in air reflects from a glass window of index 1.50. Find Brewster's angle and check that the reflected and refracted rays are perpendicular. 1. Brewster's law: \(\tan\theta_B = 1.50/1.00 = 1.50\). 2. So \(\theta_B = 56.3^\circ\) from the normal. 3. Snell's law gives the refraction angle:

\sin\theta_2 = \frac{\sin 56.3^\circ}{1.50} = 0.5547

so \(\theta_2 = 33.7^\circ\). 4. Check: \(56.3^\circ + 33.7^\circ = 90.0^\circ\). The reflected ray leaves at 56.3° on one side of the normal and the refracted ray at 33.7° on the other, so the angle between them is \(180^\circ - 90.0^\circ = 90.0^\circ\), exactly as the rule says.

Sunglasses and the blue sky

Glare from water, snow and wet roads comes from horizontal surfaces, so it is mostly horizontally polarised. Polarising sunglasses have vertical transmission axes, which block much of that glare while passing about half of ordinary unpolarised light. Tilt your head while wearing them and the glare returns. Scattering polarises light too. Sunlight drives electrons in air molecules to oscillate across the beam, and they re-radiate. Light scattered at 90° to the sunbeam cannot have its field along the original beam, so the sky about 90° from the Sun is strongly polarised. Photographers use a polarising filter to darken that part of the sky and make clouds stand out, and bees use sky polarisation to navigate.

Liquid crystal displays

An LCD screen is a sandwich of polarisers. Light from a backlight passes a first polariser, then a thin layer of liquid crystal, then a second polariser crossed with the first. In the classic twisted-nematic design, the liquid crystal's molecules form a gentle twist that rotates the light's polarisation by 90°, so it passes the second polariser and the pixel is bright. Applying a voltage straightens the molecules, the polarisation is no longer turned, and the crossed polariser blocks it: the pixel goes dark. Intermediate voltages give shades of grey, and coloured filters over each sub-pixel make the colours. Because the screen's light leaves polarised, polarising sunglasses can make some screens go black when you tilt your head.

Common mistakes to avoid

First, applying Malus's law to unpolarised light; one ideal polariser always passes half. Second, using \(\cos\theta\) instead of \(\cos^2\theta\), forgetting that intensity goes as amplitude squared. Third, measuring \(\theta\) from the wrong reference: it is the angle between the light's polarisation and the filter's axis, which changes after every filter. Fourth, measuring Brewster's angle from the surface instead of the normal, or writing \(\tan\theta_B = n_1/n_2\). Fifth, thinking reflected glare is vertically polarised; from a horizontal surface it is mostly horizontal. Sixth, believing sound can be polarised.

Key takeaways

Light is a transverse wave, and its polarisation is the direction of its electric field. Unpolarised light through one ideal polariser keeps half its intensity. Polarised light through a filter at angle θ follows Malus's law, I = I₀cos²θ, so crossed filters pass nothing, yet a third filter between them can let light through. Reflected light is partly polarised parallel to the surface, and completely so at Brewster's angle, tan θ_B = n₂/n₁, where the reflected and refracted rays are perpendicular. Polarising sunglasses with vertical axes block glare, scattering polarises the sky, and LCDs control brightness by rotating polarisation between crossed polarisers.

Flashcards

Flashcard

Polarisation

The direction in which a light wave's electric field oscillates

Only transverse waves can be polarised.

Test your understanding

Question 1 of 5

Unpolarised light of intensity 80.0 W/m² passes through two ideal polarisers whose axes are 30.0° apart. What intensity emerges?

Question 2 of 5

Polarised light meets a filter whose axis is at 60.0° to the polarisation direction. What fraction of the intensity passes?

Question 3 of 5

Light in air reflects from a plastic surface of refractive index 1.60. At what angle of incidence is the reflected light completely polarised?

Question 4 of 5

Why do polarising sunglasses have vertical transmission axes?

Question 5 of 5

Unpolarised light passes through two crossed polarisers, then a third ideal polariser at 45° is placed between them. What fraction of the original intensity emerges?

← Previous topicNext topic →