Physics › Section N · Electric potential and capacitance › Topic N.1

Electric potential energy and potential difference

Every battery, socket and power line is labelled in volts. Voltage turns out to be energy per unit of charge, and that one idea lets you track electrical energy the same way you tracked gravitational energy in mechanics.

Charges on an electrical hill

Release a positive charge in an electric field and it speeds up along the field, just as a ball released on a slope speeds up as it rolls down. In both cases a conservative force does work and stored energy turns into kinetic energy. For the ball the store is gravitational potential energy; for the charge it is electric potential energy. Keep the picture in mind: high potential is like high ground, and a free positive charge tends to move "downhill" towards lower potential.

Electric potential energy

The electrostatic force is conservative: the work it does on a charge moving between two points does not depend on the path taken. That lets us define an electric potential energy, PE, measured in joules, that depends only on position. As with gravity, the field's work is minus the change in potential energy:

W_{\text{field}} = -\Delta PE

When the field speeds a charge up, it does positive work and the potential energy falls. Strictly, the energy belongs to the whole arrangement of charges, not to one charge alone. Only changes in PE matter, so you may choose any convenient point as the zero.

Potential: energy per unit charge

The force on a charge in a field is \(F = qE\), so the work done on it, and hence its change in potential energy, is proportional to \(q\). Doubling the charge doubles the energy change. To describe a point in space without reference to whatever charge happens to be there, divide by \(q\). The result is the electric potential, \(V = PE/q\), which depends only on the charges that create the field. Potential is a scalar: it has a size and a sign but no direction. Its unit is the joule per coulomb, called the volt, V, after Alessandro Volta: \(1\ \text{V} = 1\ \text{J/C}\).

Potential difference, or voltage

What can be measured is the difference in potential from a point A to a point B, the change in PE per unit charge for a charge moved from A to B:

\Delta V = V_B - V_A = \frac{\Delta PE}{q}

Rearranged, \(\Delta PE = q\Delta V\). Everyday "voltage" always means a potential difference: a 9 V battery has a potential 9 V higher at its positive terminal than at its negative one. Which point counts as 0 V is a free choice, just as heights can be measured from sea level or from the floor. In circuits, the zero is usually the negative terminal or the earth.

Voltage is not energy

A volt is energy per coulomb, so two devices with the same voltage can store very different amounts of energy. Each coulomb that passes through a 12 V battery gains 12 J, but a big battery can push far more coulombs round a circuit before it runs flat. The total energy, \(q\Delta V\), depends on both the voltage and the charge moved. A small AAA cell and a large D cell are both rated 1.5 V, but the larger one can move more charge.

Worked example: phone and tablet batteries

A phone battery and a tablet battery are both rated 3.70 V. On a full charge the phone battery can move \(1.44 \times 10^4\) C of charge and the tablet battery \(3.60 \times 10^4\) C. How much energy can each deliver? 1. Each coulomb is moved through a potential difference of 3.70 V, so use \(\Delta PE = q\Delta V\). 2. Phone: \((1.44 \times 10^4\ \text{C})(3.70\ \text{V}) = 5.33 \times 10^4\) J. 3. Tablet: \((3.60 \times 10^4\ \text{C})(3.70\ \text{V}) = 1.33 \times 10^5\) J. 4. Check: the tablet moves 2.5 times the charge at the same voltage, so it should deliver 2.5 times the energy, and \(5.33 \times 2.5 = 13.3\). Same voltage, very different energy.

Signs and the direction of motion

Use \(\Delta PE = q\Delta V\) with signs. A positive charge released from rest moves towards lower potential: \(q > 0\) and \(\Delta V < 0\), so its PE falls. A negative charge, such as an electron, moves towards higher potential: \(q < 0\) and \(\Delta V > 0\), so its PE also falls. Either way, a free charge moves so that its potential energy decreases. That is why electrons in a wire leave a battery's negative terminal and flow through the circuit towards the positive terminal.

The electron-volt

Energies of single particles are tiny in joules, so atomic and nuclear physics use the electron-volt, eV: the energy gained by a particle of charge \(e\) moved through a potential difference of 1 V.

1\ \text{eV} = (1.602 \times 10^{-19}\ \text{C})(1\ \text{V}) = 1.602 \times 10^{-19}\ \text{J}

The conversion is direct: an electron accelerated through 250 V gains 250 eV, and an ion of charge \(+2e\) accelerated through 100 V gains 200 eV. Larger units are the keV (\(10^3\) eV) and the MeV (\(10^6\) eV). Chemical bonds have energies of a few eV, while a single nuclear decay releases from a fraction of an MeV to several MeV.

Energy conservation for a moving charge

With only the electric force doing work, mechanical energy is conserved:

KE_i + PE_i = KE_f + PE_f

Every joule of electric potential energy lost becomes a joule of kinetic energy, so \(\Delta KE = -q\Delta V\). For a charge starting from rest, the kinetic energy gained equals \(|q\Delta V|\). Gravity can be ignored for particles such as electrons and protons, because the electric forces on them are many orders of magnitude larger than their weights. The model assumes a vacuum, so that no collisions with gas molecules steal energy, and speeds well below the speed of light.

Worked example: accelerating a proton

A proton, mass \(1.673 \times 10^{-27}\) kg, starts from rest and is accelerated through a potential difference of 5.00 kV in a vacuum. Find its final speed. 1. Its charge is \(+e\), so it gains 5.00 keV:

KE = (5.00 \times 10^3)(1.602 \times 10^{-19}\ \text{J}) = 8.01 \times 10^{-16}\ \text{J}

2. Set \(KE = \tfrac{1}{2}mv^2\) and rearrange:

v = \sqrt{\frac{2KE}{m}}

3. Substitute:

v = \sqrt{\frac{2(8.01 \times 10^{-16})}{1.673 \times 10^{-27}}} = 9.79 \times 10^5\ \text{m/s}

4. Check: this is about 0.3% of the speed of light, so ignoring relativity is justified.

Common mistakes to avoid

First, treating voltage as energy: volts are joules per coulomb, and the energy depends on how much charge moves. Second, dropping signs in \(\Delta PE = q\Delta V\); an electron has a negative charge, so it gains kinetic energy moving to a higher potential. Third, forgetting that \(\Delta V\) means final minus initial. Fourth, mixing units: convert eV or keV to joules before using \(\tfrac{1}{2}mv^2\) with SI masses. Fifth, quoting a potential without saying where the zero is; only differences are physical.

Key takeaways

The electric force is conservative, so it has a potential energy PE, with W(field) = −ΔPE. Electric potential is energy per unit charge, V = PE/q, a scalar measured in volts, where 1 V = 1 J/C. Potential difference is ΔV = ΔPE/q, so ΔPE = qΔV; everyday voltage is always a difference between two points. Free positive charges move to lower potential and free negative charges to higher potential, both losing PE. One electron-volt is 1.602 × 10⁻¹⁹ J. With only electric forces, KE + PE is conserved.

Flashcards

Flashcard

Electric potential energy, PE

Stored energy of a charge due to its position in an electric field, in joules

Defined because the electric force is conservative.

Test your understanding

Question 1 of 5

How much energy does a 9.00 V battery give to 2.50 C of charge that passes through it?

Question 2 of 5

An ion with charge +2e starts from rest and is accelerated through a potential difference of 400 V. How much kinetic energy does it gain?

Question 3 of 5

What is an energy of 5.00 keV in joules?

Question 4 of 5

An electron is released from rest between a point at 0 V and a point at +50 V. What happens?

Question 5 of 5

A small AAA cell and a large D cell are both rated 1.5 V. Which statement is correct?

← Previous topicNext topic →