Physics › Section G · Statics, torque, and rotation › Topic G.6
Rotational kinetic energy
A spinning wheel can hold a great deal of energy even when it is going nowhere. Rotational kinetic energy measures that energy, and it explains why a rolling ball reaches the bottom of a slope more slowly than a block sliding without friction.
Energy without going anywhere
A flywheel spinning on a fixed axle has no overall motion: its centre stays put. Yet it clearly carries energy, because it can drive a machine or throw sparks from a grinding tool as it slows. The energy is there because every piece of the wheel is moving, each at its own speed \(v = r\omega\), set by its distance from the axis. Pieces near the rim move fastest. Kinetic energy, \(\tfrac{1}{2}mv^2\), applies to each piece, and adding them up gives a single tidy formula built from the moment of inertia of the previous topic.
Where one half I omega squared comes from
Split a rigid object into small pieces of mass \(m\) at distances \(r\) from the axis. All of them share the same angular velocity \(\omega\), so each piece has speed \(r\omega\) and kinetic energy \(\tfrac{1}{2}m(r\omega)^2\). Adding over every piece and taking out the common factor \(\tfrac{1}{2}\omega^2\) gives \(\tfrac{1}{2}(\sum mr^2)\omega^2\). The bracket is the moment of inertia, so
This mirrors \(\tfrac{1}{2}mv^2\), with \(I\) for mass and \(\omega\) for speed. With \(I\) in kg·m² and \(\omega\) in rad/s the answer is in joules; revolutions per minute must be converted first.
Work done by a torque
Suppose a force \(F\) pushes tangentially on the rim of a wheel of radius \(r\) while the wheel turns through an angle \(\theta\) in radians. The rim moves an arc length \(s = r\theta\) along the force, so the work is \(Fs = Fr\theta\). Since \(Fr\) is the torque,
for a constant torque. Torque replaces force and angle replaces distance. The work-energy theorem carries over too: the net work done by all the torques equals the change in rotational kinetic energy, \(W_{\text{net}} = \Delta KE_{\text{rot}}\). A friction torque does negative work and removes energy.
Worked example: a potter's wheel
A potter's wheel is a solid disc of mass 8.0 kg and radius 0.25 m. Starting from rest, a motor applies a constant torque of 3.0 N·m for 4.0 revolutions. Ignoring friction, how fast is it turning? 1. Moment of inertia: \(I = \tfrac{1}{2}(8.0)(0.25)^2 = 0.25\ \mathrm{kg\,m^2}\). 2. Angle in radians: \(\theta = 4.0 \times 2\pi = 25.13\) rad, keeping extra figures until the end. 3. Work: \(W = \tau\theta = 3.0 \times 25.13 = 75.4\) J. 4. All of it becomes rotational energy: \(\tfrac{1}{2}(0.25)\omega^2 = 75.4\), so \(\omega = 24.6\) rad/s, which to the two significant figures of the data is 25 rad/s, about 230 rpm. 5. Check with kinematics: \(\alpha = \tau/I = 12\ \mathrm{rad/s^2}\), and \(\omega^2 = 2\alpha\theta = 603\) gives the same 25 rad/s.
Flywheels as energy stores
Because the energy depends on \(\omega^2\), doubling a flywheel's spin rate stores four times the energy, while doubling its mass only doubles it. Designers therefore spin flywheels very fast and put the mass near the rim, where it adds most to \(I\). The limit is strength: at high speed the rim must be held in a circle by large internal forces, and a wheel spun too fast bursts. Flywheels have been used to smooth the output of engines, to store braking energy in some experimental buses and racing cars, and to steady the frequency of electricity grids for short periods.
Rolling without slipping
As the rotational kinematics topic noted, a wheel or ball that rolls without slipping moves forward one circumference for each turn. Its centre therefore moves at
where \(R\) is the radius. At each instant the point touching the ground is at rest relative to the ground, while the top of the wheel moves forward at \(2v\). Static friction at the contact point stops the wheel skidding. Because the contact point does not slide, that friction does no work in ideal rolling, so mechanical energy is conserved. Real rolling loses a little energy to squashing of the tyre or ball, which these examples ignore.
Energy shared between moving and spinning
A rolling object both moves and spins, so its kinetic energy has two parts:
Write the moment of inertia as \(I = cMR^2\), where \(c\) is the number from the previous topic's list of shapes, and use \(\omega = v/R\). The radius cancels and the total becomes \(\tfrac{1}{2}(1 + c)Mv^2\). The fraction that is rotational is \(c/(1 + c)\): 2/7, about 29%, for a solid sphere; 1/3 for a solid cylinder; 2/5 for a thin hollow sphere; and 1/2 for a hoop. A 1.20 kg solid cylinder rolling at 2.0 m/s has 2.4 J of translational and 1.2 J of rotational energy.
Worked example: a bowling ball on a ramp
A 6.00 kg bowling ball, treated as a uniform solid sphere, rolls without slipping from rest down a ramp 1.50 m high. Find its speed at the bottom, using g = 9.80 m/s² and ignoring rolling losses. 1. Energy conservation: \(Mgh = \tfrac{1}{2}(1 + c)Mv^2\), with \(c = \tfrac{2}{5}\). 2. Mass cancels: \(v = \sqrt{2gh/1.4} = \sqrt{10gh/7}\). 3. Substitute: \(v = \sqrt{10 \times 9.80 \times 1.50 / 7} = \sqrt{21.0} = 4.58\) m/s. 4. Check the split: \(\tfrac{1}{2}(6.00)(4.58)^2 = 63.0\) J translational plus \(\tfrac{2}{5}\) of that, 25.2 J, rotational, totals 88.2 J, which equals \(Mgh = 6.00 \times 9.80 \times 1.50\). A frictionless sliding block would reach 5.42 m/s.
The rolling race
Solving \(Mgh = \tfrac{1}{2}(1 + c)Mv^2\) in general gives
Neither mass nor radius appears, so every solid sphere reaches the bottom of a given slope at the same speed, whatever its size. Only the shape, through \(c\), matters: a solid cylinder, with \(c = \tfrac{1}{2}\), reaches \(\sqrt{4gh/3}\). Release a solid sphere, a solid cylinder, a hollow sphere and a hoop together, and they finish in that order. The object with more mass far from its axis puts a larger share of its energy into spinning and has less left for moving forward. A block sliding without friction beats them all, since \(c = 0\) for it.
Common mistakes to avoid
First, leaving \(\omega\) in revolutions per minute or revolutions per second; convert to rad/s before using \(\tfrac{1}{2}I\omega^2\). Second, measuring \(\theta\) in revolutions or degrees in \(W = \tau\theta\). Third, forgetting the rotational term for a rolling object and getting the sliding speed \(\sqrt{2gh}\). Fourth, expecting a heavier ball to roll down faster: mass cancels. Fifth, thinking friction must waste energy in rolling; when nothing slips, static friction does no work.
Key takeaways
A rotating object has kinetic energy \(\tfrac{1}{2}I\omega^2\), with \(\omega\) in rad/s. A constant torque does work \(W = \tau\theta\), and net work changes rotational kinetic energy. Flywheel energy grows with the square of the spin rate. Rolling without slipping links speed and spin through \(v = \omega R\). A rolling object's energy is \(\tfrac{1}{2}Mv^2 + \tfrac{1}{2}I\omega^2\), and the rotational share is \(c/(1 + c)\). From rest down a height \(h\), the speed is \(\sqrt{2gh/(1 + c)}\), independent of mass and radius, so a solid sphere beats a cylinder, which beats a hoop.
Flashcards
Flashcard
Kinetic energy of a rotating object
Test your understanding
Question 1 of 5
A solid disc of mass 3.0 kg and radius 0.20 m spins about its central axis at 20 rad/s. What is its rotational kinetic energy?
Question 2 of 5
A solid cylinder rolls without slipping from rest down a slope of height 0.60 m. Using g = 9.80 m/s², what is its speed at the bottom?
Question 3 of 5
A hoop rolls along the floor without slipping. What fraction of its total kinetic energy is rotational?
Question 4 of 5
A solid sphere, a solid cylinder and a hoop are released together from rest at the top of the same slope and roll without slipping. Which reaches the bottom last?
Question 5 of 5
A constant torque of 2.0 N·m turns a wheel through 5.0 revolutions. How much work does it do?
