Physics › Section G · Statics, torque, and rotation › Topic G.5
Rotational dynamics and moment of inertia
A torque makes things spin faster or slower, but some objects respond far more sluggishly than others of the same mass. Rotational dynamics explains why: what resists a change in rotation is not just mass, but where that mass sits relative to the axis.
Why some things are hard to spin
Push a heavy door close to its hinges and it barely moves; push at the handle and it swings open. Load the outer edge of a playground roundabout with children and it becomes much harder to start than when they sit near the middle, even though the total mass is the same. The equilibrium topic defined torque, \(\tau = rF\sin\theta\), which measures how effectively a force turns something, and the rotational kinematics topic defined angular acceleration \(\alpha\), measured in rad/s². This topic connects them, in the same way that Newton's second law connects force and acceleration for straight-line motion.
From F = ma to rotation
Picture a small mass \(m\) on a light arm of length \(r\), free to turn about a fixed pivot on a frictionless table. A force \(F\) pushes the mass at right angles to the arm. Along its path, Newton's second law gives \(F = ma_t\), and the tangential acceleration is \(a_t = r\alpha\), so \(F = mr\alpha\). Multiply both sides by \(r\). The left side becomes \(rF\), which is the torque, so
The quantity \(mr^2\) plays the part that mass plays in \(F = ma\). It is called the moment of inertia, or rotational inertia, of the point mass about that pivot.
Moment of inertia of a whole object
A real object is a collection of many small pieces at different distances from the axis, so its moment of inertia is the sum over all of them:
The unit is kg·m². Two features follow from the formula. First, \(I\) depends on the axis: move the axis and every \(r\) changes. Second, distance counts twice over, because it is squared. A piece twice as far from the axis contributes four times as much. A thin hoop spun about its central axis is the one simple case, since every piece sits at the same radius \(R\), so \(I = MR^2\).
Moments of inertia of common shapes
For other shapes the sum is worked out by integration, and the results are tabulated. For a uniform object of mass \(M\) and radius \(R\) or length \(L\): a thin hoop about its central axis has \(I = MR^2\); a solid cylinder or disc about its central axis, \(\tfrac{1}{2}MR^2\); a thin hollow sphere about any diameter, \(\tfrac{2}{3}MR^2\); a solid sphere about any diameter, \(\tfrac{2}{5}MR^2\); a thin rod about an axis through its centre, \(\tfrac{1}{12}ML^2\); and the same rod about an axis through one end, \(\tfrac{1}{3}ML^2\). Both rod axes are perpendicular to the rod. For equal mass and radius, the order is hoop, hollow sphere, solid cylinder, solid sphere, from largest to smallest: the more mass near the rim, the larger \(I\).
Newton's second law for rotation
For an object turning about a fixed axis, the net torque about that axis equals the moment of inertia times the angular acceleration:
Take anticlockwise as positive and clockwise as negative, as in the equilibrium topic, add the torques with their signs, then divide by \(I\). For \(\alpha\) in rad/s², use torque in N·m and \(I\) in kg·m². Friction in an axle supplies a torque that opposes the motion. If a motor applies 5.0 N·m to a wheel with \(I = 0.80\ \mathrm{kg\,m^2}\) while friction supplies 1.0 N·m the other way, the net torque is 4.0 N·m and \(\alpha = 5.0\ \mathrm{rad/s^2}\).
Worked example: a winch drum
A light rope is wound round a winch drum, a solid cylinder of mass 12.0 kg and radius 0.150 m that turns on a frictionless axle. A worker pulls the free end with a steady 18.0 N. Find the drum's angular acceleration and its angular velocity after 3.00 s from rest. 1. Moment of inertia: \(I = \tfrac{1}{2}(12.0)(0.150)^2 = 0.135\ \mathrm{kg\,m^2}\). 2. The rope leaves the drum tangentially, so \(\tau = rF = (0.150)(18.0) = 2.70\ \mathrm{N\,m}\). 3. \(\alpha = \tau/I = 2.70/0.135 = 20.0\ \mathrm{rad/s^2}\). 4. \(\omega = \omega_0 + \alpha t = 0 + (20.0)(3.00) = 60.0\) rad/s. 5. Check: the rope accelerates at \(r\alpha = 3.00\ \mathrm{m/s^2}\), and putting \(I = \tfrac{1}{2}MR^2\) and \(\alpha = a/R\) into \(RF = I\alpha\) gives \(a = 2F/M = 36.0/12.0 = 3.00\ \mathrm{m/s^2}\) too.
Worked example: the axis matters
Two small 2.00 kg weights are fixed to the ends of a light rod 1.00 m long, and a motor applies a torque of 4.00 N·m. Compare spinning the rod about its centre with spinning it about one end. 1. About the centre, each weight is 0.500 m from the axis: \(I = 2 \times (2.00)(0.500)^2 = 1.00\ \mathrm{kg\,m^2}\). 2. About one end, one weight sits on the axis and adds nothing, while the other is 1.00 m away: \(I = (2.00)(1.00)^2 = 2.00\ \mathrm{kg\,m^2}\). 3. Angular accelerations: \(4.00/1.00 = 4.00\ \mathrm{rad/s^2}\) about the centre, and \(4.00/2.00 = 2.00\ \mathrm{rad/s^2}\) about the end. Same object and torque, yet the angular acceleration halves, because one weight moved twice as far out.
Mass distribution in action
A tightrope walker carries a long pole to raise her moment of inertia. A small unbalancing torque then produces only a small angular acceleration, giving her time to correct her lean. A batter who grips higher up the bat, called choking up, brings mass closer to the hands, lowering the moment of inertia about them so the bat can be swung round faster. The two rod formulas show the same idea: the end-axis value is four times the centre value, because more of the rod lies far from the axis. They are linked by the parallel-axis rule \(I = I_{\text{cm}} + Md^2\), where \(d\) is the distance from the centre-of-mass axis to a parallel axis. For the rod \(d = L/2\), and \(\tfrac{1}{12} + \tfrac{1}{4} = \tfrac{1}{3}\).
Common mistakes to avoid
First, using the diameter where the formula needs the radius, which makes \(I\) four times too large. Second, forgetting to square the distance in \(\sum mr^2\). Third, picking the wrong entry from the table, such as the centre-axis rod formula for a rod pivoted at its end, or treating a hoop as a solid disc. Fourth, adding torques without signs, so that a friction torque adds to the driving torque instead of subtracting. Fifth, thinking moment of inertia is a fixed property like mass: it changes whenever the axis or the arrangement of mass changes.
Key takeaways
Newton's second law for rotation is \(\tau_{\text{net}} = I\alpha\): torque plays the part of force, and moment of inertia plays the part of mass. For a point mass \(I = mr^2\), and for any object \(I = \sum mr^2\), measured in kg·m². It depends on the total mass, on how far that mass is from the axis, and on which axis is chosen. Standard values: hoop \(MR^2\), solid cylinder \(\tfrac{1}{2}MR^2\), hollow sphere \(\tfrac{2}{3}MR^2\), solid sphere \(\tfrac{2}{5}MR^2\), rod \(\tfrac{1}{12}ML^2\) about its centre and \(\tfrac{1}{3}ML^2\) about one end.
Flashcards
Flashcard
Newton's second law for rotation about a fixed axis
Test your understanding
Question 1 of 5
A uniform solid disc of mass 6.0 kg and radius 0.40 m turns about its central axis. What is its moment of inertia?
Question 2 of 5
A rope pulled with 20 N unwinds tangentially from a drum of radius 0.25 m whose moment of inertia is 0.50 kg·m². Ignoring friction, what is the drum's angular acceleration?
Question 3 of 5
A hoop, a solid cylinder, a solid sphere and a thin hollow sphere all have the same mass and radius. Which has the smallest moment of inertia about an axis through its centre?
Question 4 of 5
A uniform rod of mass 0.50 kg and length 1.2 m is pivoted about one end, with the axis perpendicular to the rod. What is its moment of inertia?
Question 5 of 5
Two 3.0 kg masses sit at opposite ends of a light rod 0.80 m long. What is the moment of inertia about an axis through the centre, perpendicular to the rod?
