Physics › Section L · Sound and hearing › Topic L.2
Sound intensity and decibels
Your ears cope with sounds ranging from the faintest they can detect to the threshold of pain, a trillion-fold spread in intensity. Intensity measures that power physically, and the decibel scale squeezes its huge range into numbers that match how loud things seem.
How strong is a sound?
A loudspeaker turns electrical energy into sound energy that spreads through the air. How much of that energy reaches you each second, per square metre of area facing the source, is the sound intensity:
Here \(P\) is the power, in watts, crossing an area \(A\) at right angles to the direction of travel, so intensity is measured in \(\text{W/m}^2\). Intensity is a physical quantity that a microphone can measure, whether or not anyone is listening. Loudness is how strong a sound seems to a listener; it rises with intensity but, as you will see, not in proportion.
Intensity and pressure amplitude
A stronger sound squeezes the air harder, so its pressure swings above and below atmospheric are larger. The pressure amplitude \(\Delta p\) is the largest of these swings, in pascals. For a sound wave in a medium of density \(\rho\) and sound speed \(v\),
Intensity goes as the square of the amplitude, as for every wave: double the pressure amplitude and the intensity rises fourfold. For example, in air at 20 °C, with \(\rho = 1.20\ \text{kg/m}^3\) and \(v = 343\) m/s, a pressure amplitude of 0.20 Pa gives
Why a logarithmic scale?
The quietest sound a person with normal hearing can detect at 1,000 Hz has an intensity of only about \(10^{-12}\ \text{W/m}^2\), and sound becomes painful near \(1\ \text{W/m}^2\). Hearing judges these sounds roughly by the ratio of intensities rather than the difference, so equal ratios seem like equal steps. The sound intensity level \(\beta\), in decibels (dB), matches that:
with reference intensity \(I_0 = 1.0 \times 10^{-12}\ \text{W/m}^2\), the threshold of hearing. A sound at \(I_0\) is 0 dB. The decibel is a tenth of a bel, named after Alexander Graham Bell. Because \(\beta\) compares two intensities, it is a ratio, not an intensity.
Worked example: from intensity to decibels and back
(a) A busy office has a sound intensity of \(4.0 \times 10^{-6}\ \text{W/m}^2\). Find its level. 1. Ratio: \(I/I_0 = 4.0 \times 10^{-6} / 10^{-12} = 4.0 \times 10^6\). 2. Take the logarithm: \(\log_{10}(4.0 \times 10^6) = 6.602\). 3. Multiply by 10: \(\beta = 66.0\) dB. (b) A power drill produces 95 dB. Find its intensity. 4. Undo the steps in reverse: \(I/I_0 = 10^{95/10} = 10^{9.5}\). 5. \(I = 10^{9.5} \times 10^{-12} = 3.2 \times 10^{-3}\ \text{W/m}^2\). 6. Check: the drill is 29 dB above the office, close to 30 dB, so its intensity should be nearly 1,000 times greater, and \(3.2 \times 10^{-3} / 4.0 \times 10^{-6} = 790\). Sensible.
Two rules worth knowing
Because the scale is logarithmic, a ratio of intensities becomes a difference in decibels:
Two rules follow. Every factor of 10 in intensity adds 10 dB, so a 90 dB sound is \(10^3 = 1{,}000\) times as intense as a 60 dB one, not 1.5 times. And doubling the intensity adds \(10\log_{10}2 = 3.01\) dB, about 3 dB. Halving it subtracts 3 dB. These rules work for any pair of sounds, whatever their actual intensities. A useful perception guide: listeners usually judge a rise of about 10 dB as roughly twice as loud, even though the intensity has gone up tenfold.
Worked example: a workshop of machines
One lathe running alone produces 82 dB at the operator's position. Four identical lathes then run together. Assume their sounds are unrelated, so their intensities simply add. What level does the operator hear? 1. Four equal sources give four times the intensity: \(I_2 = 4I_1\). 2. Change in level: \(10\log_{10}4 = 6.02\) dB. 3. New level: \(82 + 6.0 = 88\) dB. 4. Check with the 3 dB rule: two lathes double the intensity, 85 dB, and four double it again, 88 dB. Notice the trap: the answer is not \(4 \times 82 = 328\) dB. Decibels never add like intensities do.
Spreading out: the inverse-square law
A small source sending sound out evenly in all directions spreads its power over a growing sphere of area \(4\pi r^2\). With no echoes and no absorption by the air, the intensity at distance \(r\) is
Double the distance and the area is four times larger, so the intensity falls to a quarter. In decibels that is a drop of \(10\log_{10}4\), about 6 dB, for every doubling of distance. Indoors, reflections keep levels higher than this. Note the difference from the previous card: doubling the intensity adds 3 dB, but doubling the distance removes 6 dB.
Worked example: an outdoor loudspeaker
A small speaker radiates 0.20 W of sound power evenly in all directions, in an open field. Find the intensity and level at 3.0 m and at 6.0 m. 1. At 3.0 m:
2. Level: \(\beta = 10\log_{10}(1.77 \times 10^9) = 92.5\) dB. 3. At 6.0 m the distance has doubled, so the intensity is a quarter: \(4.42 \times 10^{-4}\ \text{W/m}^2\). 4. Level: \(10\log_{10}(4.42 \times 10^8) = 86.5\) dB. 5. Check: the drop is exactly 6.0 dB, as the inverse-square rule predicts.
Everyday levels and hearing safety
Rough levels: rustling leaves about 10-20 dB, a quiet room 30-40 dB, normal conversation about 60 dB, heavy traffic about 80-85 dB, a loud concert 105-115 dB, the threshold of pain about 120-130 dB, and a jet engine close by about 140 dB. Long exposure above about 85 dB can permanently damage the hair cells of the inner ear. US occupational guidance from NIOSH sets 85 dBA (decibels weighted to match the ear's sensitivity) averaged over 8 hours as the limit, and halves the safe time for every 3 dB above it, because each extra 3 dB doubles the intensity and so doubles the energy reaching the ear each second. By that guidance, 94 dB is safe for only about one hour.
Common mistakes to avoid
First, confusing intensity with intensity level: \(I\) is in \(\text{W/m}^2\), while \(\beta\) is a ratio in decibels. Second, forgetting the factor of 10 in front of the logarithm, which gives bels instead of decibels. Third, forgetting to divide by \(I_0\) before taking the logarithm. Fourth, adding decibel levels directly; convert to intensities, add, then convert back. Fifth, treating the scale as linear: 80 dB is not twice as intense as 40 dB but 10,000 times. Sixth, mixing up the two doubling rules: double the intensity, +3 dB; double the distance from a point source, −6 dB. Seventh, forgetting the square: double the pressure amplitude gives four times the intensity.
Key takeaways
Sound intensity is power per area, I = P/A, in W/m², and it is proportional to the square of the pressure amplitude: I = (Δp)²/(2ρv). The sound intensity level is β = 10 log₁₀(I/I₀) decibels, with I₀ = 1.0 × 10⁻¹² W/m², the threshold of hearing, at 0 dB. Each factor of 10 in intensity adds 10 dB, and doubling adds about 3 dB. From a point source in open air, I = P/(4πr²), so doubling the distance lowers the level by about 6 dB. Sustained exposure above about 85 dB can damage hearing.
Flashcards
Flashcard
Sound power per unit area: I = P ÷ A, in W/m²
Test your understanding
Question 1 of 5
A sound has an intensity of 1.0 × 10⁻⁵ W/m². What is its sound intensity level?
Question 2 of 5
The sound level near a road rises from 60 dB to 90 dB. By what factor has the intensity increased?
Question 3 of 5
You walk from 2.0 m to 4.0 m away from a small sound source in an open field. About how much does the sound level fall?
Question 4 of 5
The pressure amplitude of a sound wave in air is doubled. What happens to its intensity?
Question 5 of 5
What is the intensity of a sound at 80 dB?
