Physics › Section A · The nature of science and physics › Topic A.2

Units, significant figures, and estimation

Every number in physics comes with a unit and a limit on how well it is known. This topic covers the SI units, how to convert between units, how many digits a result deserves, and how to make quick estimates that tell you whether an answer is sensible.

A number is not enough

A physical quantity is anything that can be measured, such as a length, a mass or a time. Its value is a number multiplied by a unit, a standard amount agreed in advance: "5" means nothing, but "5 metres" and "5 seconds" say very different things. Scientists everywhere use the International System of Units, the SI (from the French Système International), so results from different labs can be compared directly. Everyday life in the United States still uses feet and pounds, so converting between systems is a skill you will need.

The seven SI base units

The SI is built on seven base units, and every other unit is a combination of them. The second (s) measures time, the metre (m) length, the kilogram (kg) mass, the ampere (A) electric current, the kelvin (K) temperature, the mole (mol) amount of substance and the candela (cd) luminous intensity, the brightness of a light source as the eye sees it. Mechanics needs only the first three. Since 2019, all seven are defined by fixing exact values of constants of nature. The second is set by a frequency of the caesium atom, and the speed of light is fixed at exactly 299,792,458 m/s, which in turn defines the metre.

Derived units and dimensional analysis

A derived unit is built from base units. Speed is length divided by time, so it is measured in m/s; acceleration is in \(\mathrm{m/s^2}\). Some derived units get their own names: the newton, \(1\ \mathrm{N} = 1\ \mathrm{kg\,m/s^2}\), and the joule, \(1\ \mathrm{J} = 1\ \mathrm{N\,m}\). Dimensional analysis tests an equation through its units: every term added, subtracted or set equal must match. In

x = vt + \tfrac{1}{2}at^2

the term \(vt\) has units \(\mathrm{(m/s)(s) = m}\) and \(at^2\) has \(\mathrm{(m/s^2)(s^2) = m}\), so the equation is consistent. Pure numbers like \(\tfrac{1}{2}\) carry no units, so this test cannot check them.

Prefixes and scientific notation

Physics spans huge ranges, so it uses scientific notation: a number from 1 to 10 times a power of ten, such as \(6.4 \times 10^6\) m for Earth's radius. SI prefixes stand for powers of ten: giga (G) \(10^9\), mega (M) \(10^6\), kilo (k) \(10^3\), centi (c) \(10^{-2}\), milli (m) \(10^{-3}\), micro (µ) \(10^{-6}\) and nano (n) \(10^{-9}\). Capital letters matter: 1 Mm is a million metres, while 1 mm is a thousandth of one. The order of magnitude of a quantity is the power of ten in its scientific notation, so 2.9 billion, \(2.9 \times 10^9\), has order of magnitude \(10^9\). Some books round differently; this course always uses the power as written.

Worked example: converting units

A conversion factor is a fraction equal to 1, such as \(\frac{1000\ \mathrm{m}}{1\ \mathrm{km}}\). Multiply by factors arranged so the unwanted units cancel. 1. A cheetah runs at 108 km/h. In m/s:

108\ \frac{\mathrm{km}}{\mathrm{h}} \times \frac{1000\ \mathrm{m}}{1\ \mathrm{km}} \times \frac{1\ \mathrm{h}}{3600\ \mathrm{s}} = 30.0\ \mathrm{m/s}

2. A car drives at 65.0 mph, and 1 mile is exactly 1609.344 m, so \(65.0 \times 1609.344 \div 3600 = 29.1\) m/s. 3. A phone screen has an area of 92.0 \(\mathrm{cm^2}\). Since 1 cm = 0.01 m, the factor must be squared, \((0.01)^2 = 10^{-4}\), so the area is \(9.20 \times 10^{-3}\ \mathrm{m^2}\). 4. Check: since 1 m/s is 3.6 km/h, \(108 \div 3.6 = 30.0\), as found.

Accuracy, precision and uncertainty

Accuracy describes nearness to the true or accepted value. Precision describes how well repeated measurements agree with one another. A scale reading 512 g, 511 g and 512 g for a standard 500 g mass is precise but not accurate. Every measurement has an uncertainty, the range within which the true value probably lies, written as a value plus or minus an amount: \(2.50 \pm 0.05\) m. The percent uncertainty compares that amount with the value:

\%\ \text{uncertainty} = \frac{\delta x}{x} \times 100\%

Here \(\delta x\) is the uncertainty, so \(0.05 \div 2.50 \times 100\% = 2\%\). When measured values are multiplied or divided, their percent uncertainties add to give the result's percent uncertainty.

Counting significant figures

Significant figures are the digits that carry real information: the certain digits plus the first uncertain one. A ruler marked only in whole centimetres can give 14.7 cm, three significant figures, with the 7 estimated between marks. For zeros: zeros between other digits count (4.05 has 3); leading zeros only locate the decimal point and do not count (0.0062 has 2); trailing zeros after a decimal point count, because someone measured them (3.20 has 3). Trailing zeros in a whole number such as 1500 are ambiguous, so write \(1.5 \times 10^3\) for two figures or \(1.500 \times 10^3\) for four. Exact numbers, such as counts or defined conversions like 1 km = 1000 m, have unlimited significant figures.

Significant figures in calculations

A result cannot be more certain than the data it came from. When multiplying or dividing, the answer keeps as many significant figures as the input with the fewest. When adding or subtracting, it keeps only as many decimal places as the input with the fewest decimal places. Exact numbers never limit the result. Carry one or two extra digits through intermediate steps and round only at the end, because rounding at every step lets small errors pile up.

Worked example: a sprint on a measured track

A coach measures a straight in two parts: 84.39 m with a tape and 15.6 m with a wheel reading to 0.1 m. A runner covers it in 12.6 s. Find the length and average speed. 1. Add: \(84.39 + 15.6 = 99.99\) m. 2. The wheel reading has only one decimal place, so round the sum to one decimal place: 100.0 m, which has four significant figures. 3. Divide, using the unrounded sum: \(99.99 \div 12.6 = 7.9357\) m/s. 4. The time has three significant figures, the fewest, so the speed is 7.94 m/s. 5. Check: 100 m in about 12.5 s would be 8 m/s, so 7.94 m/s is sensible.

Worked example: an order-of-magnitude estimate

An estimate uses rounded, sensible guesses to find a quantity's rough size. How often does a heart beat in a lifetime? 1. Assume about 70 beats per minute and a life of about 80 years. 2. Minutes in a year: \(60 \times 24 \times 365 = 525{,}600\). 3. Beats: \(70 \times 525{,}600 \times 80 \approx 2.9 \times 10^9\). 4. In scientific notation the power of ten is \(10^9\), so the answer is about three billion beats, order of magnitude \(10^9\). 5. Check: a rate of 60 or 80 beats per minute gives \(2.5 \times 10^9\) or \(3.4 \times 10^9\), so the order of magnitude is still \(10^9\).

Common mistakes to avoid

First, dropping units, or mixing km and m in one calculation. Second, converting an area or volume with an unsquared factor: \(1\ \mathrm{m^2}\) is \(10^4\ \mathrm{cm^2}\), not 100. Third, turning a conversion factor upside down; check that the units cancel. Fourth, copying every calculator digit, or rounding at each step instead of only at the end. Fifth, applying the multiplication rule to a sum: addition is limited by decimal places, not by significant figures. Sixth, confusing m (milli) with M (mega).

Key takeaways

A measured quantity is a number times a unit. The SI has seven base units, including the metre, kilogram and second, all defined by exact constants of nature; derived units such as m/s and the newton combine them. Every term in a valid equation has the same units. Convert with factors equal to 1, squared or cubed for areas and volumes. Accuracy is closeness to the true value; precision is agreement between repeats. Products and quotients keep the fewest significant figures; sums and differences keep the fewest decimal places. Estimates give the order of magnitude.

Flashcards

Flashcard

Physical quantity

Something measurable, written as a number times a unit

5 m and 5 s are different quantities.

Test your understanding

Question 1 of 5

A train travels at 54 km/h. What is its speed in m/s?

Question 2 of 5

How many significant figures does the measurement 0.004050 kg have?

Question 3 of 5

A rectangular board measures 3.6 m by 2.145 m. What is its area, to the correct significant figures?

Question 4 of 5

A microchip has an area of 1.5 cm². What is its area in m²?

Question 5 of 5

Three samples have masses 25.1 g, 3.27 g and 0.155 g. What is their total mass, correctly rounded?

← Previous topicNext topic →