Physics › Section B · Kinematics in one and two dimensions › Topic B.1

Displacement, vectors, and scalars

Before you can say how fast something moves, you need a precise way to say where it is and how far it has shifted. This topic sets up positions, displacement and distance, and the difference between quantities that have a direction and quantities that do not.

Describing motion

Kinematics is the part of physics that describes motion: where an object is, how fast it moves and how its motion changes, without yet asking what causes it. The causes, forces, come in a later section. To keep things simple we use the point-particle model, the kind of simplification described in the first topic: an object is treated as a single point, ignoring its size and shape. That works well for a car on a long road. We begin with one-dimensional motion, along a single straight line, where one number says where an object is.

Reference frames and position

Motion is always measured relative to something. A reference frame is the object or set of axes from which positions are measured, together with a clock for timing. A passenger sitting on a moving train is at rest in the train's frame but moving at high speed in the frame of the ground; both descriptions are correct. Within a frame, an object's position is its location relative to a chosen origin, the zero point. On a straight line, position is written \(x\) and measured in metres. A position can be negative: it simply means the object is on the negative side of the origin.

Choosing a coordinate system

A coordinate system for one-dimensional motion is a number line laid along the path, with an origin and a chosen positive direction. The usual choices are right, east or up as positive, but any choice works. For an object falling downwards, it can be handier to make down positive. Two rules matter. First, state your choice, usually with an arrow on a sketch. Second, once a problem has started, never change it: every position, displacement, velocity and acceleration in that problem must use the same convention, or the signs stop meaning anything.

Displacement

Displacement is the change in an object's position:

\Delta x = x_f - x_i

The Greek capital delta, \(\Delta\), means "change in", always calculated as final value minus initial value. The SI unit is the metre. The sign of \(\Delta x\) gives the direction of the change: positive means the object ended up further along the positive direction than it started, negative means the reverse. Displacement depends only on where the motion starts and ends. A wandering route and a straight dash between the same two points produce exactly the same displacement.

Worked example: a corridor walk

A school corridor has its origin at a classroom door, with east positive. A student starts at \(x = +12.0\) m, walks west to a locker at \(x = -3.5\) m, then walks east to a drinking fountain at \(x = +4.0\) m. 1. First leg: \(\Delta x_1 = -3.5 - 12.0 = -15.5\) m, so 15.5 m west. 2. Second leg: \(\Delta x_2 = 4.0 - (-3.5) = +7.5\) m, so 7.5 m east. 3. Whole trip: \(\Delta x = 4.0 - 12.0 = -8.0\) m, so 8.0 m west of the start. 4. Distance travelled: \(15.5 + 7.5 = 23.0\) m. 5. Check: the two legs add to the whole, \(-15.5 + 7.5 = -8.0\) m, and the distance is larger than 8.0 m because the student doubled back.

Distance travelled

Distance travelled, often just called distance, is the total length of the path an object follows. It has no direction and is never negative. The magnitude of a displacement is its size without the sign: a displacement of \(-8.0\) m has magnitude 8.0 m. Distance travelled is always greater than or equal to the magnitude of the displacement, and the two are equal only when the object moves along a straight line without turning back. Some books use "distance" for the magnitude of the displacement; in this course distance always means path length. A swimmer who completes two 50 m lengths of a pool and finishes at the starting wall has travelled 100 m, yet her displacement is zero.

Vectors and scalars

A vector is a quantity with both a magnitude and a direction: displacement, velocity, acceleration and force are vectors. A scalar has a magnitude only: distance travelled, speed, time, mass, temperature and energy are scalars. A vector is drawn as an arrow whose length is proportional to its magnitude and which points in its direction, so a 20 m displacement is drawn twice as long as a 10 m one. In print a vector is often shown in bold or with an arrow over its symbol. Saying "the cat moved 3 m" gives a scalar; "the cat moved 3 m towards the door" gives a vector.

What a minus sign means

In one dimension a vector has only two possible directions, so a plus or minus sign is enough to show which. A velocity of \(-4\) m/s, with east positive, means 4 m/s westward. Scalars can be negative too, but there the sign means something different. A temperature of \(-10\) °C is a point below zero on a scale, not a direction, and no arrow could represent it. So a minus sign on a vector tells you direction, while a minus sign on a scalar places it below zero. Distance travelled and speed, however, can never be negative.

Worked example: a lift with two conventions

Floors in a building are 3.50 m apart, with the origin at the ground floor. A lift starts at floor 4, goes down to the basement, floor \(-1\), then up to floor 2. 1. With up positive: \(x_i = 4 \times 3.50 = +14.0\) m, the basement is at \(-3.50\) m and floor 2 at \(+7.00\) m. 2. Displacement: \(\Delta x = 7.00 - 14.0 = -7.0\) m, so 7.0 m downwards. 3. Distance travelled: \(17.5 + 10.5 = 28.0\) m. 4. With down positive, every position changes sign, so \(\Delta x = -7.00 - (-14.0) = +7.0\) m, again 7.0 m downwards. 5. Check: the physical answer does not depend on the convention; only the sign used to report it does.

Beyond a straight line

When motion is not along one line, a sign is no longer enough: a vector's direction needs an angle or a compass bearing. Walk 3.0 km north and then 4.0 km east and you have travelled 7.0 km, but your displacement is the straight arrow from start to finish, 5.0 km long by Pythagoras' theorem, pointing roughly north-east. Adding vectors in two dimensions has its own topic later in this section; until then, motion stays on a line.

Common mistakes to avoid

First, subtracting the wrong way round: displacement is always final position minus initial position. Second, adding positions instead of subtracting them. Third, treating distance travelled and displacement as the same thing; they agree only for motion in one direction without reversing. Fourth, giving a displacement without a direction or sign. Fifth, changing the positive direction partway through a problem. Sixth, assuming every negative number shows a direction: a negative temperature is a scalar below zero, not a vector.

Key takeaways

Kinematics describes motion without its causes. Positions are measured in a reference frame from a chosen origin, along an axis with a stated positive direction that never changes mid-problem. Displacement is \(\Delta x = x_f - x_i\), a vector whose sign gives its direction and which depends only on the start and end points. Distance travelled is the total path length, a scalar that is never negative and never less than the magnitude of the displacement. Vectors have magnitude and direction and are drawn as arrows; scalars have magnitude only.

Flashcards

Flashcard

Kinematics

The description of motion, without asking what causes it

Forces come in a later section.

Test your understanding

Question 1 of 5

A beetle crawls along a ruler from x = +0.40 m to x = −0.25 m. What is its displacement?

Question 2 of 5

A runner completes three laps of a 400 m track and stops exactly where she started. Which is correct?

Question 3 of 5

Which of these quantities is a vector?

Question 4 of 5

A weather report gives a temperature of −8 °C. What does the minus sign tell you?

Question 5 of 5

With up positive, a lift moves from x = +10.5 m down to x = +3.5 m, then up to x = +17.5 m. What distance does it travel?

← Previous topicNext topic →