Statics › Section G · Centroids and centers of gravity › Topic G.4
Centroids of composite parts
Most engineering shapes are assembled from rectangles, triangles and circles. Split them into those pieces, treat every hole as negative area, and a short table gives the centroid of the whole.
Building shapes from pieces
An angle bracket is two rectangles. A T-beam is two rectangles. A base plate is a rectangle with bolt holes taken out. Because a centroid is a weighted average, and a weighted average can be built in stages from group averages, each simple piece can stand in for all of its own area: a single area \(A_i\) located at its own centroid \((\bar{x}_i, \bar{y}_i)\). The standard results from the previous topic, "Centroids", supply those centroids. All that remains is careful bookkeeping, which this topic organises into a table.
The composite method
1. Sketch the shape, choose one origin and axes, and split the shape into as few simple parts as possible, with no overlaps. 2. Make a table with a row for each part and columns for \(A_i\), \(\bar{x}_i\), \(\bar{y}_i\), \(\bar{x}_iA_i\) and \(\bar{y}_iA_i\), each with units. 3. Add only the area and moment columns; a sum of centroid coordinates means nothing. 4. Divide:
5. Plot the result on the sketch and ask whether it looks right.
Worked example: an angle bracket
An L-shaped bracket has a horizontal leg 90 mm long and 15 mm thick along the \(x\)-axis, and a vertical leg 15 mm thick rising to a total height of 120 mm along the \(y\)-axis. 1. Part 1, the horizontal leg: \(A_1 = 90 \times 15 = 1350\ \mathrm{mm^2}\) at (45, 7.5). 2. Part 2, the vertical leg above it: \(A_2 = 15 \times 105 = 1575\ \mathrm{mm^2}\) at (7.5, 67.5). 3. \(A = 2925\ \mathrm{mm^2}\), and the first moments are
4. \(\bar{x} = 24.8\) mm and \(\bar{y} = 39.8\) mm. 5. That point lies in the empty corner between the legs, which is correct: a centroid need not lie on material.
Holes and cut-outs
A hole is a part with negative area. Its \(A_i\) enters the table with a minus sign, so its first moments \(\bar{x}_iA_i\) and \(\bar{y}_iA_i\) take the sign as well, while its centroid coordinates keep their ordinary signs. The same idea lets you describe a shape as a large simple shape minus what is missing. The bracket above is a 90 by 120 mm rectangle minus a 75 by 105 mm rectangle centred at (52.5, 67.5): \(A = 10{,}800 - 7875 = 2925\ \mathrm{mm^2}\) and
the same as before. A second decomposition is an excellent check.
Worked example: a plate with a hole
A plate 240 mm wide and 160 mm tall has its bottom-left corner at the origin and a 60 mm diameter hole centred at (60, 100) mm. 1. Plate: \(38{,}400\ \mathrm{mm^2}\) at (120, 80). 2. Hole: \(-\pi(30)^2 = -2827\ \mathrm{mm^2}\) at (60, 100). 3. \(A = 35{,}573\ \mathrm{mm^2}\). 4.
so \(\bar{x} = 124.8\) mm. 5.
so \(\bar{y} = 78.4\) mm. 6. Check: the hole is left of and above the plate's centre, and the centroid moved right and down, away from the missing material.
Worked example: a T-beam
A T-section has a vertical web 20 mm thick and 140 mm tall, topped by a flange 160 mm wide and 20 mm thick. Take \(y\) up from the bottom of the web. 1. The section is symmetric about its vertical centre line, so \(\bar{x}\) lies on it. 2. Web: \(2800\ \mathrm{mm^2}\) at \(y = 70\) mm. Flange: \(3200\ \mathrm{mm^2}\) at \(y = 150\) mm. 3.
4. Check: the result lies between 70 and 150 mm and nearer the flange, which has more area. This matters because a beam of one material, bending within the elastic range, has its neutral axis, the line of zero stress, through the centroid of its cross-section.
Composite bodies in three dimensions
Solids work the same way with volume as the weight, plus a \(\bar{z}\) column. When the parts are made of different materials, weight by mass or weight instead, finding each part's mass from its volume and density. A floor lamp with an 8 kg base centred 0.05 m above the floor, a 2 kg pole centred at 0.80 m and a 1 kg head at 1.55 m has its centre of mass at
low down, which is why the heavy base keeps it upright. Use the same quantity, all masses or all weights, above and below the line.
The theorems of Pappus
Centroids also give volumes and surface areas of revolution; the calculus topic "Moments, centres of mass, and centroids" proved the volume version. Revolve a plane area \(A\) about an axis in its plane that does not cut it, and the volume swept is \(V = 2\pi \bar{r} A\), where \(\bar{r}\) is the distance from the axis to the area's centroid. Revolve a curve of length \(L\) instead and the surface area is \(2\pi \bar{r} L\), with \(\bar{r}\) now to the curve's centroid. A 30 by 10 mm rectangle whose centroid is 50 mm from the axis sweeps a ring of volume \(2\pi(50)(300) = 94{,}248\ \mathrm{mm^3}\).
Common mistakes to avoid
First, adding the \(\bar{x}_i\) or \(\bar{y}_i\) columns, which has no meaning. Second, giving a hole a negative area but a positive moment, or the reverse. Third, overlapping two parts so that the corner square is counted twice. Fourth, measuring some parts from a different origin. Fifth, crossing the moments: \(\bar{y}\) uses \(Q_x = \sum \bar{y}_iA_i\). Finally, a quick check: for a shape made of two solid parts (no holes), the centroid always lies on the straight line joining the two parts' centroids, closer to the larger part.
Key takeaways
Split the shape into a few simple, non-overlapping parts with known areas and centroids, all measured from one origin. Tabulate \(A_i\), \(\bar{x}_i\), \(\bar{y}_i\) and the first moments, sum the area and moment columns only, then \(\bar{x} = Q_y/A\) and \(\bar{y} = Q_x/A\). Holes are negative areas and push the centroid away from them. Solids use volume, and mixed materials use mass or weight. A beam's neutral axis passes through its section centroid, and Pappus's theorems turn centroids into volumes and areas of revolution.
Flashcards
Flashcard
Split into simple parts, tabulate, sum moments, divide by total area
Test your understanding
Question 1 of 5
A shape is made of two rectangles: 2000 mm² with its centroid at y = 10 mm, and 1500 mm² with its centroid at y = 70 mm. What is ȳ for the whole shape?
Question 2 of 5
A 200 mm by 100 mm plate (centroid at x = 100 mm) has a 2000 mm² cut-out whose centroid is at x = 40 mm. What is x̄ for the plate with its cut-out?
Question 3 of 5
In a composite-centroid table, which entries should NOT be added up?
Question 4 of 5
A lamp has an 8 kg base centred at z = 0.05 m, a 2 kg pole centred at z = 0.80 m and a 1 kg head at z = 1.55 m. Where is its centre of mass?
Question 5 of 5
A rectangle 20 mm in the radial direction and 40 mm parallel to the axis has its centroid 100 mm from the axis. What volume does it sweep when revolved once about the axis?
