Statics › Section D · Moments and static equivalence › Topic D.5

Couples

Turn a steering wheel with both hands and you push one way with one hand and the other way with the other. That pair of forces cancels as a push but adds as a turn: it is a couple, a pure moment that is the same about every point of the body.

Two hands on a wheel

When you turn a steering wheel with both hands, one hand pushes up while the other pulls down by roughly the same amount. The wheel does not slide sideways, because the two forces cancel, but it turns readily. The same pattern appears when you twist a tap handle, turn a key or drive a screw with a T-handled tool. This combination of equal and opposite forces on separate lines is so common, and behaves so simply, that it gets its own name and its own rules.

What a couple is

A couple is two parallel forces that are equal in magnitude, opposite in direction and act along different lines. Because the forces are equal and opposite, their resultant force is zero, so a couple has no tendency to translate a body. Because their lines are separate, they do have a tendency to rotate it. A couple is therefore called a pure moment, and the strength of its turning effect is the couple moment. If the two lines coincided, the forces would simply cancel and there would be no couple at all.

The couple moment

The moment of a couple is

M = Fd

where F is the magnitude of either force and d is the perpendicular distance between their two lines of action. It has the units of any moment, such as N·m. Its sense is the way the pair would turn the body: in a plane, clockwise or counterclockwise, positive counterclockwise as usual. Notice what is missing from the formula. There is no moment centre, and no distance from any particular point, only the separation of the two forces from each other.

The same about every point

Take moments about any point O in the plane. If O lies outside the pair, a distance a from the nearer force, the farther force has arm \(a + d\) and turns the opposite way:

M_O = F(a + d) - Fa = Fd

If O lies between the forces, both turn the same way: \(Fa + F(d - a) = Fd\). Either way the answer is Fd and the point has dropped out. A single force has a different moment about every point; a couple has the same moment about all of them. That is the property that makes couples so convenient.

A free vector

Because a couple's moment does not depend on location, a couple moment is a free vector: it is not tied to any point, and it may be drawn anywhere on the body without changing the body's external response, such as its support reactions. On a diagram it is shown as a curved arrow with its value, or in three dimensions as a straight double-headed arrow. There is one limit. Moving a couple does change what happens inside the body, how a beam bends at each section, which the later topics on internal forces explore.

Equivalent couples

Two couples are equivalent when they have the same moment, in magnitude and sense. A couple of 50 N with arms 0.20 m apart, 10 N·m, has exactly the same external effect as 100 N with arms 0.10 m apart, or 25 N with arms 0.40 m apart. Force can be traded for separation. That is why large valve wheels, long tap wrenches and wide steering wheels are easy to turn: a wider grip produces the required couple with a smaller force from each hand.

Worked example: a tap wrench

A machinist turns a tap wrench whose handles are gripped 0.24 m apart, pushing with 45 N from each hand in opposite directions, at right angles to the handle. 1. The couple moment is \(M = 45 \times 0.24 = 10.8\) N·m. 2. The tap needs 15 N·m to cut. With the same grip width, each hand would need \(15/0.24 = 62.5\) N. 3. Alternatively, with the same 45 N, the hands would need to be \(15/45 = 0.333\) m apart. 4. Check: \(62.5 \times 0.24\) and \(45 \times 0.333\) both give 15 N·m.

Couples in a moment sum

Couple moments add like any moments: as signed numbers in a plane, as vectors in space. A shaft receiving 30 N·m counterclockwise from a motor and 12 N·m clockwise from friction feels a net couple of 18 N·m counterclockwise. When you add moments about a point P, include the moments of the forces and every couple:

\sum M_P = \sum (\mathbf{r} \times \mathbf{F}) + \sum C

A couple counts in full wherever it acts, even when it is applied at P itself. A 100 N upward force 0.5 m to the right of P, plus a 40 N·m counterclockwise couple, gives \(50 + 40 = 90\) N·m counterclockwise about P.

Couples in three dimensions

In space, a couple moment is a vector perpendicular to the plane that contains its two forces, with its sense from the right-hand rule. To compute it, let r run from any point on the line of one force, −F, to any point on the line of the other, F. Then

\mathbf{M} = \mathbf{r} \times \mathbf{F}

This is simply the sum of the two forces' moments about any point, with the terms that cancel removed. Couples in different planes combine by vector addition, component by component.

Worked example: a couple in 3D

A vertical force \(\mathbf{F} = \langle 0, 0, 60 \rangle\) N acts at A(0.5, 0, 0) m, and \(-\mathbf{F}\) acts at B(0, 0.4, 0) m. Find the couple moment. 1. Take r from B, on the line of −F, to A, on the line of F: \(\mathbf{r} = \langle 0.5, -0.4, 0 \rangle\) m. 2. \(M_x = (-0.4)(60) - 0 = -24\), \(M_y = 0 - 0.5(60) = -30\), \(M_z = 0\). So \(\mathbf{M} = \langle -24, -30, 0 \rangle\) N·m, with magnitude 38.4 N·m. 3. Check with Fd: the lines are vertical, so d is the horizontal distance between them, \(\sqrt{0.5^2 + 0.4^2} = 0.640\) m, and \(60 \times 0.640 = 38.4\) N·m. 4. M is horizontal, perpendicular to the vertical plane of the forces.

Common mistakes to avoid

First, measuring d along a slanted line instead of perpendicular to both forces. Second, thinking a couple's moment depends on the point chosen; it does not. Third, leaving a couple out of a moment sum because it acts at the moment centre. Fourth, calling any two opposite forces a couple: they must also be equal and on different lines. Fifth, giving a couple a resultant force; it has none. Sixth, in 3D, taking r between two arbitrary points instead of from the line of −F to the line of F.

Key takeaways

A couple is two equal, opposite, parallel forces on separate lines. Its resultant force is zero, so it is a pure moment, with magnitude M = Fd, where d is the perpendicular distance between the lines. Its moment is the same about every point, so it is a free vector that can be placed anywhere for external effects, though internal effects depend on where it acts. Couples with equal moments are equivalent, so a wider grip needs less force. Couple moments add with signs or as vectors, belong in every moment sum, and in 3D equal r × F, with r from the line of −F to the line of F.

Flashcards

Flashcard

Couple

Two equal, opposite, parallel forces on separate lines

A steering wheel turned with two hands.

Test your understanding

Question 1 of 5

A driver pushes up with 30 N and pulls down with 30 N on a steering wheel, along parallel lines 0.50 m apart. What is the couple moment?

Question 2 of 5

What is the resultant force of a couple?

Question 3 of 5

A couple of 200 N with lines 0.15 m apart is replaced by an equivalent couple whose lines are 0.25 m apart. What force is needed?

Question 4 of 5

A plate carries a 40 N·m counterclockwise couple and a 15 N·m clockwise couple. What single couple is equivalent?

Question 5 of 5

An 18 N·m couple acts on a plate. What is its moment about a point 2 m away from both of its forces?

← Previous topicNext topic →