Statics › Section B · Forces and other vectors › Topic B.7

Cross products

Pull on a spanner and the bolt turns about an axis that is perpendicular to both the spanner and your pull. The cross product is the vector operation that captures exactly this, and it is the tool the next chapter uses to compute the moment of a force.

A product that is a vector

The dot product, from the topic "Dot products and projections", turns two vectors into a scalar. The cross product, or vector product, written \(\mathbf{A} \times \mathbf{B}\), turns two vectors into a third vector perpendicular to both. Its main use in statics is the moment of a force, \(\mathbf{M} = \mathbf{r} \times \mathbf{F}\), developed in the topics "The moment of a force" and "Moments in 3D and about an axis". This topic covers the operation itself: its size, its direction, its rules, and how to compute it reliably from components, so that the later moment calculations become routine.

Size and direction

The cross product is defined by

\mathbf{A} \times \mathbf{B} = AB\sin\theta\;\hat{\mathbf{u}}

where \(\theta\) is the angle between the vectors, from 0° to 180°, and \(\hat{\mathbf{u}}\) is the unit vector perpendicular to both, chosen by the right-hand rule. The magnitude, \(AB\sin\theta\), equals the area of the parallelogram the two vectors form, or the magnitude of \(\mathbf{B}\) times the part of \(\mathbf{A}\) perpendicular to it. It is zero when the vectors are parallel or opposite, because \(\sin 0^\circ = \sin 180^\circ = 0\), and largest, \(AB\), when they are perpendicular.

The right-hand rule

Two versions of the rule give the same answer; master at least one. Three fingers: point your right index finger along the first vector and your middle finger along the second, and your thumb points along the cross product. Point and curl: lay the fingers of your right hand along the first vector and curl them towards the second, through the smaller angle between them; your thumb points along the product. The rule only works with the right hand and with right-handed axes, which is why the topic "3D vectors and direction angles" insisted on them. Using the left hand reverses every answer.

Order matters

Unlike ordinary multiplication, the cross product is not commutative. Swapping the order reverses the direction:

\mathbf{B} \times \mathbf{A} = -(\mathbf{A} \times \mathbf{B})

Curling your fingers from B towards A instead of from A towards B flips your thumb, which is a good way to remember it. Any vector crossed with itself, or with a parallel vector, gives the zero vector. The product does distribute over addition, \(\mathbf{A} \times (\mathbf{B} + \mathbf{C}) = \mathbf{A} \times \mathbf{B} + \mathbf{A} \times \mathbf{C}\), and scalar factors can be pulled out, \((c\mathbf{A}) \times \mathbf{B} = c(\mathbf{A} \times \mathbf{B})\). The distributive rule underlies Varignon's theorem later in the course.

Cross products of unit vectors

For the Cartesian unit vectors, the magnitude of any product of two different ones is \(1 \times 1 \times \sin 90^\circ = 1\), and the right-hand rule gives the direction:

\mathbf{i} \times \mathbf{j} = \mathbf{k} \qquad \mathbf{j} \times \mathbf{k} = \mathbf{i} \qquad \mathbf{k} \times \mathbf{i} = \mathbf{j}

Reversing any pair adds a minus sign, so \(\mathbf{j} \times \mathbf{i} = -\mathbf{k}\) and \(\mathbf{i} \times \mathbf{k} = -\mathbf{j}\), and \(\mathbf{i} \times \mathbf{i} = \mathbf{0}\). A handy memory aid is to write i, j and k around a circle: going round in the order i, j, k gives a positive result, and going the other way gives a negative one. Pull any minus signs out before crossing.

Worked example: unit-vector algebra

Find \((2\mathbf{i} - 3\mathbf{k}) \times 4\mathbf{j}\). 1. Distribute: \(2\mathbf{i} \times 4\mathbf{j} - 3\mathbf{k} \times 4\mathbf{j}\). 2. Pull out the scalars: \(8(\mathbf{i} \times \mathbf{j}) - 12(\mathbf{k} \times \mathbf{j})\). 3. Use the table: \(\mathbf{i} \times \mathbf{j} = \mathbf{k}\), and \(\mathbf{k} \times \mathbf{j} = -\mathbf{i}\) because it runs against the circle. 4. So the result is \(8\mathbf{k} + 12\mathbf{i}\), or \(\langle 12, 0, 8 \rangle\). 5. Check: the answer should be perpendicular to \(4\mathbf{j}\), so it must have no j component, and it has none.

Vectors in a plane

If A and B both lie in the x-y plane, their cross product must point along the z axis, perpendicular to that plane:

\mathbf{A} \times \mathbf{B} = (A_xB_y - A_yB_x)\,\mathbf{k}

A positive coefficient means the product points out of the page, towards a viewer on the positive z axis looking down at the plane, and that happens when turning from A to B through the smaller angle is counterclockwise. A negative coefficient means clockwise. This is the origin of the convention used throughout statics that counterclockwise moments are positive.

Worked example: a 2D cross product

Find \(\mathbf{A} \times \mathbf{B}\) for \(\mathbf{A} = \langle 3, 1 \rangle\) m and \(\mathbf{B} = \langle -2, 4 \rangle\) N, then confirm it with the definition. 1. Formula:

A_xB_y - A_yB_x = (3)(4) - (1)(-2) = 14

so \(\mathbf{A} \times \mathbf{B} = 14\,\mathbf{k}\) N·m. 2. Check the size: \(A = \sqrt{10}\) m and \(B = \sqrt{20}\) N, the dot product gives an angle of 98.1° between them, and \(\sqrt{200}\sin 98.1^\circ = 14.0\). 3. Check the direction: A points at 18.4° and B at 116.6°, so turning from A to B is counterclockwise, and \(+\mathbf{k}\) is correct.

The determinant formula

For general 3D vectors, write a 3 by 3 determinant with the unit vectors in the first row, A in the second and B in the third:

\mathbf{A} \times \mathbf{B} = \begin{vmatrix} \mathbf{i} & \mathbf{j} & \mathbf{k} \\ A_x & A_y & A_z \\ B_x & B_y & B_z \end{vmatrix}

Expanding along the first row, each entry multiplies the 2 by 2 determinant left when its row and column are covered, with the middle term subtracted:

\mathbf{A} \times \mathbf{B} = (A_yB_z - A_zB_y)\mathbf{i} - (A_xB_z - A_zB_x)\mathbf{j} + (A_xB_y - A_yB_x)\mathbf{k}

Each 2 by 2 determinant is evaluated as \(ad - bc\). By hand this is error-prone, so use software when you can and check the result.

Worked example: a 3D cross product

Find \(\mathbf{r} \times \mathbf{F}\) for \(\mathbf{r} = \langle 0.4, -0.3, 1.2 \rangle\) m and \(\mathbf{F} = \langle 150, 200, -100 \rangle\) N. 1. i term:

(-0.3)(-100) - (1.2)(200) = 30 - 240 = -210

2. j term, with its minus sign:

-[(0.4)(-100) - (1.2)(150)] = -(-40 - 180) = 220

3. k term:

(0.4)(200) - (-0.3)(150) = 80 + 45 = 125

4. Result: \(\langle -210, 220, 125 \rangle\) N·m, with magnitude 328.8 N·m. 5. Check perpendicularity with dot products: with r, \(-84 - 66 + 150 = 0\); with F,

-31{,}500 + 44{,}000 - 12{,}500 = 0

Both vanish, as they must.

Common mistakes to avoid

First, reversing the order, which flips the sign of the result; for moments, always write r first. Second, forgetting the minus sign on the j term of the determinant. Third, using the left hand, or left-handed axes, for the direction. Fourth, using \(\cos\theta\) instead of \(\sin\theta\) for the magnitude. Fifth, skipping the dot-product check, which catches most arithmetic slips in seconds.

Key takeaways

The cross product \(\mathbf{A} \times \mathbf{B}\) is a vector of magnitude \(AB\sin\theta\), perpendicular to both A and B, with its sense given by the right-hand rule. Its magnitude is the parallelogram's area, zero for parallel vectors. It is not commutative: \(\mathbf{B} \times \mathbf{A} = -\mathbf{A} \times \mathbf{B}\), but it distributes over addition. For unit vectors, \(\mathbf{i} \times \mathbf{j} = \mathbf{k}\), \(\mathbf{j} \times \mathbf{k} = \mathbf{i}\) and \(\mathbf{k} \times \mathbf{i} = \mathbf{j}\). In a plane the product is \((A_xB_y - A_yB_x)\mathbf{k}\); in 3D, use the determinant, then check with dot products.

Flashcards

Flashcard

A × B

A vector perpendicular to both A and B

Also called the vector product.

Test your understanding

Question 1 of 5

In a right-handed coordinate system, what is i × k?

Question 2 of 5

What is A × B for A = ⟨2, 5⟩ m and B = ⟨4, −1⟩ N, both in the x-y plane?

Question 3 of 5

What is ⟨1, 2, 0⟩ × ⟨0, 3, 4⟩?

Question 4 of 5

If A × B = ⟨5, −2, 7⟩, what is B × A?

Question 5 of 5

Two vectors of magnitudes 6 m and 4 m make an angle of 30°. What is the magnitude of their cross product?

← Previous topicNext topic →