Statics › Section C · Equilibrium of particles › Topic C.1
Equilibrium, particles, and free-body diagrams
Every statics problem starts the same way: decide what body you are studying, cut it free from its surroundings, and draw every force that acts on it. This topic defines equilibrium and the particle model, and teaches the free-body diagram that every later topic relies on.
What statics studies
Statics is the study of bodies in equilibrium. A body is whatever object, or group of parts, you choose to examine as a unit: a whole bridge when sizing its foundations, a single bolt when checking its strength. Most of this course treats bodies as rigid, meaning they do not stretch, bend or twist under load. No real object is perfectly rigid, but the deformations of a steel beam are usually tiny compared with its size, so the idealisation gives accurate forces. Mechanics of materials later starts from exactly these results.
Equilibrium means zero acceleration
A body is in equilibrium when its acceleration is zero. It may be at rest, or it may move in a straight line at constant speed: a lift rising steadily is in equilibrium just as much as a parked car. With \(\mathbf{a} = \mathbf{0}\), Newton's second law, from the topic "Newton's laws of motion", reduces to
It reads both ways: forces that add to zero mean equilibrium, and a body known to be in equilibrium must have forces that add to zero. Statics mostly uses the second reading, to find unknown forces. The sum is a vector sum, so directions matter.
What makes a particle
In statics a particle is defined by its forces, not by its size. A body is treated as a particle when every force on it is concurrent, meaning all the lines of action pass through one point, or coincident, meaning they share one line. A ring where three cables meet is a particle, and so is a crane hook. Concurrent forces cannot turn the body about their common point, so force balance is the only condition needed. A seesaw with a child at each end is not a particle: the two weights act on different lines and tend to rotate it.
One equation per dimension
The vector equation \(\sum \mathbf{F} = \mathbf{0}\) splits into one scalar equation for each direction: one along a line, two in a plane, three in space. Each scalar equation can fix one unknown, so a particle problem can be solved for at most one unknown per dimension. If a planar particle seems to have three unknowns, something has probably been missed, such as equal tensions on both sides of an ideal pulley. Forces in this section are also treated as concentrated: each acts at one point along a definite line, drawn as one arrow.
Space diagrams and free-body diagrams
A space diagram shows the situation as it looks: the lamp, the cables, the ceiling hooks. A free-body diagram, or FBD, shows only the chosen body, cut free from everything that touches it, with each removed support replaced by the force it exerts. The FBD is where most errors are made or prevented. Leave out a force, add one that is not there, or point one the wrong way, and every later equation is wrong, however careful the algebra. Draw one for every problem.
Drawing a free-body diagram in five steps
1. Choose and isolate the body or point, and sketch it on its own, away from the space diagram. 2. Draw axes and state the positive direction of each. 3. Add every load: applied pushes and pulls, and the body's weight unless it is small enough to neglect. 4. Add every reaction, one for each support or contact you cut away. 5. Label every force with a value or a symbol, and add the angles and dimensions you will need. The finished diagram should stand on its own: someone else could write your equilibrium equations from it alone.
Forces you will draw most often
Weight acts straight down through the centre of gravity, with magnitude \(W = mg\) and \(g = 9.81\) m/s². A cable, rope or chain can only pull, so it acts along its own length, away from the body. A smooth surface can only push, perpendicular to itself and towards the body. A spring acts along its axis, pulling when stretched and pushing when compressed. A light strut pinned at both ends and loaded only there acts along its length and may push or pull. Each is an idealised model of a real connection.
Unknown directions and internal forces
You will not always know which way an unknown force points. Assume a direction, draw it and solve: a negative answer simply means the force acts the opposite way, with the magnitude you found. An FBD also shows only external forces, those exerted on the body by things outside it. Forces between the parts of a body come in equal and opposite pairs, by Newton's third law, and cancel. To find such an internal force, such as the tension inside a chain, cut the body there, so that the force becomes external to one of the pieces.
Worked example: a sign on two cables
A 15 kg sign hangs from a vertical cable attached to ring A. The ring is held by cable AB, running horizontally left to a wall, and cable AC, running up and to the right at 50° above the horizontal to a beam. Find both tensions. 1. Isolate ring A, with x to the right and y up. The vertical cable pulls down with \(W = 15(9.81) = 147.15\) N, \(T_{AB}\) pulls left, and \(T_{AC}\) pulls up and right at 50°. 2. Two unknowns, two equations. 3. \(\sum F_y = 0\) gives \(T_{AC}\sin 50^\circ = 147.15\), so \(T_{AC} = 192\) N. 4. \(\sum F_x = 0\) gives \(T_{AB} = T_{AC}\cos 50^\circ = 123\) N. 5. Check: both tensions are positive, so both cables pull, as cables must.
Worked example: two pots on chains
A 2.5 kg flower pot hangs from a ceiling hook on chain 1, and a 4.0 kg pot hangs below it on chain 2. The chains are light. Find each tension. 1. Isolate the lower pot: its weight, \(4.0(9.81) = 39.24\) N, acts down and chain 2 pulls up, so \(T_2 = 39.2\) N. 2. Isolate the upper pot. Chain 1 pulls up; its own weight, 24.53 N, and chain 2 both pull down, since chain 2 pulls down on the upper pot as hard as it pulls up on the lower one. 3. So \(T_1 = 24.53 + 39.24 = 63.8\) N. 4. Check with one FBD around both pots: chain 2 is now internal and drops out, and chain 1 carries the weight of all 6.5 kg, 63.8 N.
Common mistakes to avoid
First, forgetting the weight, or drawing it anywhere but the centre of gravity. Second, drawing forces that the body exerts on its surroundings instead of forces acting on it; at each contact ask what touches the body and what it does to the body. Third, letting a cable push or a smooth surface pull. Fourth, including internal forces, which cancel in pairs. Fifth, pressing on with more unknowns than equations: a planar particle allows only two, so look for the missing fact. Sixth, treating a negative answer as an error rather than a reversed direction.
Key takeaways
Equilibrium means zero acceleration, at rest or at constant velocity, so the forces on the body sum to zero as vectors. A particle is any body whose forces are concurrent or coincident, whatever its size, and it allows at most one unknown per dimension. A free-body diagram isolates the body and shows every external force, labelled. Assume directions for unknowns; a negative result means the opposite sense. Cut a body to expose an internal force.
Flashcards
Flashcard
The study of bodies in equilibrium
Test your understanding
Question 1 of 5
In statics, what makes a body a particle?
Question 2 of 5
A crate is lowered by a crane cable at a constant speed of 0.5 m/s. Which statement is true?
Question 3 of 5
A 3.0 kg pot hangs from chain 1, and a 5.0 kg pot hangs below it from chain 2. The chains are light. What is the tension in chain 1? Use g = 9.81 m/s².
Question 4 of 5
You drew an unknown force pointing left, and solving gives −35 N. What does this mean?
Question 5 of 5
A ring in a vertical plane hangs from three cables whose tensions are all unknown. What should you conclude?
