Statics › Section B · Forces and other vectors › Topic B.1
Scalars and vectors
A 500 N force pulling a crate forwards and a 500 N force pressing it into the floor have very different effects. Statics is built on vectors, quantities that carry a direction as well as a size, and this topic sets out the language and the simplest arithmetic for handling them.
Two kinds of quantity
A scalar has a size but no direction. It is a single number with a unit, which may be positive, negative or zero, and it follows ordinary algebra: mass, time, temperature and length are scalars. A vector has both a magnitude and a direction, and must obey the rules of vector algebra. Force is the main vector in statics, with position and moment close behind. You may have met vectors in the physics topic "Displacement, vectors, and scalars" or the linear algebra topic "Vectors and vector equations". This topic sets out the conventions statics uses, which you will rely on for the rest of the course.
Notation
Printed work shows a vector in bold type, such as \(\mathbf{F}\) or \(\mathbf{r}\). By hand, you write an arrow or a bar over the letter, and all three forms mean the same vector. The magnitude is written with vertical bars, \(|\mathbf{F}|\), or simply as the same letter in plain italic type, \(F\). A magnitude is a size, so it is always positive or zero, never negative. Keeping bold and plain symbols distinct in your own work is not fussiness: \(\mathbf{F}\) is an arrow with a direction, while \(F\) is just a number of newtons.
Anatomy of a vector
Draw a vector as an arrow whose length represents its magnitude. The pointed end is the tip and the other end is the tail. The infinite straight line through tip and tail is the line of action. A force on a body also has a point of application, where it acts. For a rigid body, sliding a force along its own line of action does not change its external effect, an idea called the principle of transmissibility; it does change the internal forces, so it is not allowed when they matter. Some vectors, such as the moment of a couple, are free vectors: their location does not matter at all.
Describing a direction
Directions are measured against a coordinate system, which fixes an origin and reference directions, usually perpendicular x, y and z axes. One common description gives the orientation, the angle between the line of action and a reference direction, and the sense, which way along that line the arrow points. A body's weight, for instance, has a vertical orientation and a downward sense. Another description combines a signed number with a unit vector, a vector of length 1 along an axis. The unit vector along x is written \(\mathbf{i}\), and the topic "Unit vectors and forces along a line" develops this fully.
Scalar components and magnitudes
In the form \(\mathbf{F} = F_x\,\mathbf{i}\), the signed number \(F_x\) is called a scalar component. Its size gives the magnitude and its sign gives the sense: positive points towards the labelled, positive end of the axis, and negative points the other way. Take a 20 kg toolbox, with the y axis pointing up. Its weight has magnitude \(20 \times 9.81 = 196.2\) N, and since it points down, \(\mathbf{W} = -196.2\,\mathbf{j}\) N, where \(\mathbf{j}\) is the unit vector along y. The scalar component is negative, while the magnitude is the positive 196.2 N. Mixing these two up is a common source of sign errors.
One-dimensional vectors
The simplest vectors all lie along one line. Place an axis along that line and give each vector a signed scalar component. The vectors then add, subtract and scale exactly like ordinary signed numbers, and the sign of the result gives its sense. Graphically, you add by the tip-to-tail method: slide the second arrow so its tail sits on the first arrow's tip, and the resultant runs from the first tail to the last tip. Vector addition is commutative, so the order makes no difference. The resultant is the single vector equivalent to all of them together.
Worked example: three pulls on one rope
Three people pull on the same straight rope. Ana pulls with 450 N towards the east, while Ben and Chloe pull towards the west with 380 N and 120 N. Find the resultant force on the rope. 1. Choose an axis: x positive towards the east. 2. Scalar components: \(+450\), \(-380\) and \(-120\) N. 3. Add them:
4. Interpret: the negative sign means the resultant points west, so \(\mathbf{R} = -50\,\mathbf{i}\) N, a 50 N force towards the west. 5. Check: the westward pulls total 500 N against 450 N eastward, so west should win by 50 N.
Subtraction and scaling
To subtract a vector, add its negative:
The negative \(-\mathbf{B}\) has the same magnitude and line of action as \(\mathbf{B}\) but the opposite sense, so in components you just flip every sign. Multiplying a vector by a scalar \(k\) keeps its line of action and multiplies its magnitude by \(|k|\). If \(k\) is negative the sense also reverses. Doubling a force doubles its arrow; multiplying it by \(-1\) turns the arrow end for end.
Worked example: subtracting and scaling
Two forces act along a horizontal axis: \(\mathbf{A} = 5\,\mathbf{i}\) kN and \(\mathbf{B} = -2\,\mathbf{i}\) kN. Find \(\mathbf{A} - \mathbf{B}\), \(\mathbf{B} - \mathbf{A}\), \(3\mathbf{B}\) and \(-0.5\mathbf{A}\). 1. Negate B to get \(+2\,\mathbf{i}\) kN, then add: \(\mathbf{A} - \mathbf{B} = 7\,\mathbf{i}\) kN. 2. Reversing the order reverses the result: \(\mathbf{B} - \mathbf{A} = -7\,\mathbf{i}\) kN. 3. Scaling: \(3\mathbf{B} = -6\,\mathbf{i}\) kN and \(-0.5\mathbf{A} = -2.5\,\mathbf{i}\) kN. 4. Check: the magnitude of \(\mathbf{A} - \mathbf{B}\) is 7 kN, not \(5 - 2 = 3\) kN, because the two forces point in opposite directions.
Common mistakes to avoid
First, giving a magnitude a negative value: a negative sign belongs to a scalar component, never to a magnitude. Second, writing a vector symbol without bold, an arrow or a bar, so it reads as a number. Third, subtracting magnitudes instead of vectors when forces point in opposite directions. Fourth, sliding a force along its line of action when internal forces are being studied. Fifth, forgetting to state which direction is positive before assigning signs.
Key takeaways
Scalars have size only; vectors have magnitude and direction. Vectors are printed in bold and handwritten with an arrow or bar, and their magnitudes, written \(|\mathbf{F}|\) or \(F\), are never negative. A vector has a tail, a tip and a line of action, and a force on a rigid body can slide along that line without changing its external effect. Directions are given by orientation and sense, or by a signed scalar component times a unit vector. Along one line, vectors add, subtract and scale like signed numbers, and \(\mathbf{A} - \mathbf{B} = \mathbf{A} + (-\mathbf{B})\).
Flashcards
Flashcard
A quantity with size but no direction
Test your understanding
Question 1 of 5
Which of these quantities is a vector?
Question 2 of 5
A force is written F = −35 i N. What is its magnitude?
Question 3 of 5
Forces of +300 N, −450 N and +80 N act along one line. What is the resultant?
Question 4 of 5
Along one axis, A = 4 i kN and B = −6 i kN. What is A − B?
Question 5 of 5
Which change leaves the external effect of a force on a rigid body unchanged?
