← All guides

Upgrade a PC or laptop with more RAM or an SSD

Intermediate · 1 to 2 hours · Free guide

RAM and SSD upgrades are the cheapest way to make an older computer feel new. The hard part is buying the right part; the install itself is a few screws.

  1. Find the exact model

    Open Command Prompt and run: wmic csproduct get name (or check the sticker underneath). Search that model plus "RAM upgrade" or "SSD upgrade" to see what fits.

  2. Check what you have

    Task Manager, Performance, Memory shows slots used and speed. Many thin laptops have soldered RAM that cannot be upgraded; check before buying.

  3. Buy the matching part

    RAM: same type (DDR4 or DDR5), laptop (SO-DIMM) or desktop (DIMM), and ideally the same speed. SSD: check whether the slot takes M.2 NVMe, M.2 SATA or a 2.5-inch SATA drive.

  4. Back up and prepare

    Back up your files. For an SSD swap, use the SSD maker's free cloning tool or plan a fresh Windows install from a USB stick made with Microsoft's Media Creation Tool.

  5. Install safely

    Shut down, unplug, and on laptops disconnect the battery if it is accessible. Touch bare metal to discharge static. Seat RAM at an angle and press until the clips click; slide an M.2 SSD in at an angle and fix it with its screw.

  6. Confirm it works

    Boot up and check Task Manager shows the new memory or drive. For a new SSD, set it as the boot drive in the BIOS if needed, then initialize any empty drive in Disk Management.

Checklist

  • Exact model number found
  • Compatible part confirmed (type, size, slot)
  • Files backed up
  • Clone or fresh-install plan ready
  • Static discharged, power and battery disconnected
  • New part detected in Task Manager
  • Old drive wiped before reuse (see the drive-wiping guide)
Download checklist

Rather have it done for you?

Max does this work professionally. Send a note with what you need and you will get a reply by email.