Accounting › Section U · Standard costs and variances › Topic U.1

Developing standard costs

A standard cost says what one unit of product ought to cost when work goes as planned. Setting it carefully gives managers a yardstick for budgets, prices and every variance in this section.

What a standard is

A budget and a standard answer the same question at different scales. A budget states the planned revenue and cost for a whole company, department or period. A standard states the planned cost of one unit: how much of each input it should take and what each input should cost. Multiply the standard by the units actually made and you get what the month's output should have cost. Comparing that figure with actual spending gives a variance, which the next four topics split into its causes.

Why companies set standards

Standards serve several jobs at once. They feed the budget: once a unit's standard is known, the operating budgets in Operating budgets can be built quickly for any planned volume. They support pricing, because managers know a product's expected cost before quoting a customer. They support control through management by exception: managers look closely only at large gaps between standard and actual. They simplify bookkeeping, because inventory can be carried at standard cost. Service firms use them too: a hospital has a standard nursing time per procedure, and a car-repair shop prices many jobs from a standard labour time per task.

Ideal versus attainable standards

An ideal standard assumes perfect conditions: no waste, no breakdowns, no idle time and the most skilled worker at full speed. Because it can almost never be met, it tends to discourage workers, and nearly every variance against it is unfavourable, which hides the genuinely bad months. An attainable, or practical, standard allows for normal waste, rest breaks, setups and occasional machine trouble, so a capable team working efficiently can reach it. Most companies use attainable standards: they are hard enough to motivate, realistic enough to plan with, and a variance from them carries real information.

Setting price standards

Each input needs a price standard and a quantity standard. The materials price standard is the expected cost of one unit of material delivered and ready to use: the supplier's price, less any purchase discounts the company expects to take, plus freight-in and receiving costs. The purchasing department usually supplies it, based on quotes and expected market conditions. The labour rate standard is the expected cost of one hour of direct labour: the wage rate plus the employer's payroll taxes and fringe benefits that go with each hour. Human resources and payroll supply the figures, often from union contracts or planned pay scales.

Setting quantity standards

The materials quantity standard is the amount of material allowed per unit, including an allowance for normal waste, trimming, evaporation and rejected units. The labour time standard is the direct labour hours allowed per unit, including normal setup, cleanup and rest time. Engineers often time each step, and production supervisors judge what a trained crew can sustain. Accountants combine the estimates and check them against past results. The phrase "normal" matters: allowances cover the waste a well-run process always produces, not the waste of a careless one, which should appear as a variance.

Standards for overhead

Overhead cannot be traced to units, so its standard is a rate per unit of an activity base, usually direct labour hours or machine hours, just like the rate in Predetermined overhead rates. The company prepares a flexible budget, as in Flexible budgets, and picks a denominator level of activity, the normal monthly hours it plans to work. The variable overhead rate is budgeted variable overhead per hour, the same at every level. The fixed overhead rate is budgeted fixed overhead divided by the denominator hours:

\text{Fixed rate} = \frac{\text{Budgeted fixed OH}}{\text{Denominator hours}}

Each unit is charged its standard hours times each rate.

Worked example: Pellworth's standard cost card

Pellworth Pottery, Inc. makes a glazed garden planter. 1. Clay: 3.8 kg ends up in a finished planter, plus 0.2 kg for normal trimming and breakage, so 4 kg. The price is $1.40 per kg, plus $0.12 freight, less a $0.02 discount: $1.50. 2. Labour: 24 minutes of throwing and glazing plus 6 of setup and cleanup is 0.5 hours; $20.00 wages plus $4.00 taxes and benefits is $24.00 per hour. 3. Overhead: the monthly budget is $40,000 variable and $50,000 fixed at a denominator of 5,000 hours, so $8 and $10 per hour.

\begin{array}{lr} \text{Clay } 4 \times 1.50 & 6.00 \\ \text{Labour } 0.5 \times 24 & 12.00 \\ \text{Var. OH } 0.5 \times 8 & 4.00 \\ \text{Fixed OH } 0.5 \times 10 & 5.00 \\ \hline \text{Standard cost} & 27.00 \end{array}

Standard quantities allowed for actual output

Variances always compare actual inputs with the inputs allowed for the output actually produced, not the output planned. The standard quantity allowed (SQ) is units produced times the standard quantity per unit, and the standard hours allowed (SH) are units produced times the standard hours per unit. This section uses one sign convention throughout:

\text{Variance} = \text{Actual} - \text{Standard}

A positive result is unfavourable (U), because cost was higher than it should have been; a negative result is favourable (F). For fixed overhead's volume variance, budget minus applied overhead plays the same role, as Overhead variances explains.

Worked example: Pellworth's March output

In March Pellworth made 9,600 planters, not the 10,000 planned. 1. Standard clay allowed: \(9{,}600 \times 4 = 38{,}400\) kg. 2. Standard hours allowed: \(9{,}600 \times 0.5 = 4{,}800\) hours. 3. Standard cost of the output: \(9{,}600 \times 27 = 259{,}200\), or $259,200. 4. Actual costs were clay $56,840, labour $123,480, variable overhead $39,060 and fixed overhead $51,200, a total of $270,580. 5. Total variance: \(270{,}580 - 259{,}200 = 11{,}380\), so $11,380 U. Notice what was not done: comparing actual cost with 10,000 planters at standard, $270,000, would wrongly suggest costs were almost on target. The next topics split the $11,380 into price, quantity, rate, efficiency, spending and volume parts.

Keeping standards current

Companies commonly review standards at least once a year and revise them when a process, material, supplier contract or wage agreement changes. A standard left unchanged after a supplier raises prices produces an unfavourable price variance every month that tells managers nothing new. The opposite risk is a standard so loose that results always look good. Standards work best when the people who must meet them help to set them, with management giving final approval.

Common mistakes to avoid

First, mixing up a budget and a standard: one is a total, the other a per-unit amount. Second, computing the standard quantity from planned output instead of actual output. Third, leaving freight-in, expected discounts or payroll taxes and benefits out of the price standards. Fourth, leaving out allowances for normal waste or setup time, which builds an ideal standard by accident. Fifth, dividing fixed overhead by actual hours instead of the denominator hours chosen in advance. Sixth, reading a positive variance as good: under the convention here, positive means unfavourable.

Key takeaways

A standard cost is the planned cost of one unit, built from a price standard and a quantity standard for materials, labour and overhead. Price standards include freight, expected discounts, payroll taxes and benefits; quantity standards include normal waste and setup time. Attainable standards motivate better than ideal ones. Overhead rates come from the flexible budget at a denominator activity level. Variances compare actual cost with the standard cost of actual output and are computed as actual minus standard: positive is unfavourable, negative favourable.

Flashcards

Flashcard

Standard cost

The planned cost of one unit of product or service

Standard quantity × standard price, for each input.

Test your understanding

Question 1 of 5

A company expects to pay a supplier $3.20 per pound, take a $0.05 per pound purchase discount, and pay $0.15 per pound for freight-in. What is the materials price standard?

Question 2 of 5

A product's standard is 1.5 direct labour hours per unit. The company planned to make 2,000 units but made 1,800, and workers logged 2,850 hours. What are the standard hours allowed?

Question 3 of 5

Budgeted fixed overhead is $72,000 a month and the denominator activity is 6,000 machine hours. Actual hours were 5,500. What is the standard fixed overhead rate?

Question 4 of 5

Why do most companies prefer attainable standards to ideal standards?

Question 5 of 5

Under the convention Variance = actual − standard, a materials variance works out to +$900. How is it reported?

← Previous topicNext topic →