Calculus › Section H · Applications of integrals › Topic H.4
Arc length and surfaces of revolution
How long is a curved road, and how much material coats a curved pipe? Both answers come from the same picture: chop the curve into tiny straight pieces and let an integral add them up.
Measuring a curve with straight pieces
No ruler can follow a curve, but a curve can be approximated by short straight segments placed end to end, the way a polygon hugs a circle. If the pieces are short enough, the total of their lengths is close to the length of the curve. This is also how practical questions get answered: the length of a roller-coaster track, the amount of trim to edge a curved path, or the amount of paint to coat the surface swept out when a pipe's profile is rotated. The integral in this topic adds up tiny Pythagorean pieces, first for lengths and then for the surfaces that curves sweep out when they spin.
The arc length formula
Take a small piece of the curve \(y = f(x)\) above a tiny interval of width \(dx\). If the piece runs from \((x, f(x))\) to \((x + dx, f(x + dx))\), its horizontal change is \(dx\) and its vertical change is about \(dy = f'(x)\,dx\). By Pythagoras its length is
Adding the pieces over \([a, b]\) gives the formula, valid when \(f'\) is continuous on the interval:
The square root is the whole point: length is a hypotenuse, so it responds to both horizontal and vertical change.
Worked example: a curve with a neat length
Find the length of \(y = \frac{2}{3}x^{3/2}\) from \(x = 0\) to \(x = 8\). Differentiate: \(f'(x) = x^{1/2}\). Then \(1 + [f'(x)]^2 = 1 + x\), and
Be honest about why this worked: the \(2\)-over-\(3\) coefficient was chosen precisely so that \(1 + [f']^2\) collapses to \(1 + x\). Most arc length integrals, such as \(\int \sqrt{1 + 4x^2}\,dx\) for \(y = x^2\), need techniques from later topics or numerical evaluation.
The straight-line check
Before trusting a new formula, test it on a case with a known answer. For the line \(y = mx + c\) from \(x = a\) to \(x = b\), the derivative is the constant \(m\), so
which is exactly the distance formula for a right triangle with legs \(b - a\) and \(m(b - a)\). For instance, \(y = 3x + 1\) from \(x = 0\) to \(x = 2\) has length \(2\sqrt{10}\), which you can confirm directly from the endpoints \((0, 1)\) and \((2, 7)\). When a new formula reproduces an old one in a simple case, that is evidence it is being used correctly.
Arc length in the y-direction
When the curve is more naturally written as \(x = g(y)\), the same argument with the roles swapped gives
Choose the variable in which the curve has a simple formula, and stick with it. For \(x = \frac{1}{3}(y^2 + 2)^{3/2}\) from \(y = 0\) to \(y = 3\), the derivative is \(g'(y) = y\sqrt{y^2 + 2}\), so \(1 + [g'(y)]^2 = y^4 + 2y^2 + 1 = (y^2 + 1)^2\). The root disappears, and \(L = \int_0^3 (y^2 + 1)\,dy = 9 + 3 = 12\). Solving for \(y\) as a function of \(x\) here would only make the work harder.
Surfaces of revolution: bands
Rotate the curve \(y = f(x) \ge 0\) about the \(x\)-axis and it sweeps out a surface, like the skin of a vase. Slice it into thin bands, one per tiny piece of curve. A band is a short frustum, and a frustum unrolled is a strip: its area is the circumference of its middle circle times its slant length. For the band swept by the piece \(ds\), that middle circumference is about \(2\pi f(x)\) and the slant length is \(ds\), so the band's area is \(2\pi f(x)\,ds\). Adding bands gives
The surface formula is the arc length formula wearing a circumference: the same root appears, multiplied by \(2\pi f(x)\).
Worked example: the sphere formula
Rotate the semicircle \(y = \sqrt{9 - x^2}\) on \([-3, 3]\) about the \(x\)-axis. Then \(f'(x) = \frac{-x}{\sqrt{9 - x^2}}\), so \(1 + [f']^2 = \frac{9}{9 - x^2}\) and
The integral collapses: \(S = 2\pi\int_{-3}^3 3\,dx = 36\pi\). That is exactly \(4\pi r^2\) with \(r = 3\), the sphere's surface area formula, reproduced from scratch. Whenever a surface integral simplifies to a constant, expect a classical formula at the end.
Worked example: a surface about the y-axis
When the rotation axis is the \(y\)-axis, the radius of each band is the distance from the curve to that axis, which is \(x\) itself:
Rotate \(y = x^2\) on \([0, 1]\) about the \(y\)-axis. Then
The substitution \(u = 1 + 4x^2\) works because \(du = 8x\,dx\), which is exactly the factor sitting outside the root. As with arc length, the root governs which curves give elementary answers.
Common mistakes to avoid
First, mutilating the root: \(\int \sqrt{[f']^2}\,dx = \int |f'|\,dx\) is the total vertical distance travelled, not the length, and dropping the \(1\) gives exactly that wrong quantity. Second, using the wrong radius in a surface problem: the radius is \(f(x)\) about the \(x\)-axis and \(x\) about the \(y\)-axis. Third, confusing the surface area \(4\pi r^2\) with the volume \(\frac{4}{3}\pi r^3\); the surface integral produces the former. Fourth, forgetting the \(ds\) root entirely and integrating \(2\pi f(x)\,dx\), which measures a flat ribbon, not the slanted band.
Key takeaways
Arc length is \(L = \int_a^b \sqrt{1 + [f'(x)]^2}\,dx\), or the same formula in \(y\) when the curve is \(x = g(y)\); a straight line correctly reproduces the distance formula. Rotating a curve gives surface area \(S = 2\pi\int_a^b f(x)\sqrt{1 + [f']^2}\,dx\) about the \(x\)-axis, and the same integral with radius \(x\) instead of \(f(x)\) about the \(y\)-axis. Both formulas add tiny slant lengths \(ds\), each multiplied by a circumference for surfaces. Test every setup on a known shape, like a sphere, before trusting it on a new one.
Flashcards
Flashcard
Arc length of y = f(x)
Test your understanding
Question 1 of 5
What is the arc length of y = 2x + 1 from x = 0 to x = 3?
Question 2 of 5
Find the arc length of y = (2/3)x^(3/2) from x = 0 to x = 8.
Question 3 of 5
The semicircle y = √(16 − x²) on [−4, 4] is rotated about the x-axis. What is the surface area?
Question 4 of 5
The curve y = x² on [0, 1] is rotated about the y-axis. What is the surface area?
Question 5 of 5
When a curve y = f(x) is rotated about the y-axis, what multiplies the slant factor √(1 + [f′]²) in the surface integral?
Standards: 8 (BC)
