Chemistry › Section N · Acid-base equilibria › Topic N.4
Hydrolysis of salts
Dissolve table salt and the water stays neutral, but sodium acetate makes it basic and ammonium chloride makes it acidic. Each ion in a salt can be a weak acid, a weak base or a bystander, and knowing which lets you predict, and calculate, the pH.
Not every salt is neutral
A neutralisation forms a salt, so it is tempting to assume salt solutions are neutral. Many are not. A 0.10 M solution of sodium acetate has a pH near 9, and a 0.10 M solution of ammonium chloride a pH near 5. The reason is that a dissolved salt releases ions, and some ions are themselves Brønsted-Lowry acids or bases that react with water. This reaction of an ion with water, giving hydronium or hydroxide, is called hydrolysis. Predicting a salt's effect means looking at the cation and the anion separately and asking whether each one can donate or accept a proton.
Judging the cation
The cations of the strong bases, the group 1 ions such as \(\mathrm{Na^+}\) and \(\mathrm{K^+}\), and \(\mathrm{Ca^{2+}}\), \(\mathrm{Sr^{2+}}\) and \(\mathrm{Ba^{2+}}\), do not react appreciably with water, so they leave the pH unchanged. The conjugate acid of a weak base is a weak acid. Ammonium is the key example:
with \(K_a = \frac{K_w}{K_b} = 5.6 \times 10^{-10}\). Many other metal ions, especially small ones with a high charge such as \(\mathrm{Al^{3+}}\) and \(\mathrm{Fe^{3+}}\), are also acidic, for the reason explained two cards on.
Judging the anion
The anion of a strong acid, such as \(\mathrm{Cl^-}\), \(\mathrm{Br^-}\), \(\mathrm{I^-}\), \(\mathrm{NO_3^-}\) or \(\mathrm{ClO_4^-}\), is a base of negligible strength, so it leaves the pH unchanged. The anion of a weak acid is a weak base that takes a proton from water:
Its \(K_b\) comes from the parent acid: for acetate, \(K_b = \frac{1.0 \times 10^{-14}}{1.8 \times 10^{-5}} = 5.6 \times 10^{-10}\); for fluoride, \(1.5 \times 10^{-11}\). Other basic anions include cyanide, \(\mathrm{CN^-}\), from the weak acid HCN, and carbonate, \(\mathrm{CO_3^{2-}}\). So NaCl and \(\mathrm{KNO_3}\) give neutral solutions, NaF and \(\mathrm{CH_3COONa}\) basic ones.
Hydrated metal ions as acids
In water, an aluminium ion is held tightly by six water molecules, forming the complex ion \(\mathrm{[Al(H_2O)_6]^{3+}}\). The small, highly charged metal ion pulls electron density towards itself through each Al–O bond, which weakens the O–H bonds of the attached water. One of those waters can then give a proton to the solvent:
The product can lose further protons, step by step. The acid strength of hydrated metal ions generally rises with charge and falls with size, which is why solutions of aluminium and iron(III) salts are noticeably acidic, while sodium and potassium salts are not.
Worked example: a basic salt
Find the pH of 0.10 M sodium acetate, \(\mathrm{CH_3COONa}\), at 25 °C. 1. Ions: \(\mathrm{Na^+}\) is a bystander; acetate is a weak base with \(K_b = 5.6 \times 10^{-10}\). 2. ICE: \(\mathrm{[CH_3COOH] = [OH^-]} = x\) and \(\mathrm{[CH_3COO^-]} = 0.10 - x\). 3. Because \(K_b\) is tiny, \(x \approx \sqrt{5.6 \times 10^{-10} \times 0.10} = 7.5 \times 10^{-6}\) M. 4. Test: x is far below 5% of 0.10 M, and well above the \(10^{-7}\) M of hydroxide from water. 5. \(\mathrm{pOH} = -\log(7.5 \times 10^{-6}) = 5.13\), so pH = 14.00 − 5.13 = 8.87. 6. Check: mildly basic, as a weak base should be.
Worked example: an acidic salt
Find the pH of 0.20 M ammonium chloride, \(\mathrm{NH_4Cl}\), at 25 °C. 1. Ions: \(\mathrm{Cl^-}\) is the conjugate base of a strong acid, so it is a bystander; \(\mathrm{NH_4^+}\) is a weak acid. 2. \(K_a = \frac{1.0 \times 10^{-14}}{1.8 \times 10^{-5}} = 5.6 \times 10^{-10}\). 3. ICE: \(\mathrm{[NH_3] = [H_3O^+]} = x\) and \(\mathrm{[NH_4^+]} = 0.20 - x\). 4. \(x \approx \sqrt{5.6 \times 10^{-10} \times 0.20} = 1.1 \times 10^{-5}\) M, easily under 5% of 0.20 M. 5. pH = −log(1.06 × 10⁻⁵) = 4.98. 6. Check: the solution is weakly acidic, and much less acidic than 0.20 M HCl, at pH 0.70.
When both ions react
If the cation is acidic and the anion basic, compare the two constants. Whichever is larger wins. Ammonium fluoride, \(\mathrm{NH_4F}\), has \(K_a(\mathrm{NH_4^+}) = 5.6 \times 10^{-10}\) and \(K_b(\mathrm{F^-}) = 1.5 \times 10^{-11}\). The acid constant is larger, so the solution is acidic. Ammonium acetate is a neat special case: the ammonium \(K_a\) and the acetate \(K_b\) are both \(5.6 \times 10^{-10}\), because ammonia's \(K_b\) and acetic acid's \(K_a\) are both \(1.8 \times 10^{-5}\). The two effects cancel and the solution is very close to neutral, even though both ions react with water.
Amphiprotic anions
Some anions can act either way, so the same comparison decides. Hydrogen carbonate, in baking soda, can lose a proton (\(K_a = 4.7 \times 10^{-11}\)) or gain one, with \(K_b = \frac{K_w}{4.3 \times 10^{-7}} = 2.3 \times 10^{-8}\), using the \(K_a\) of carbonic acid. Since \(K_b > K_a\), sodium hydrogen carbonate solution is basic, which is why baking soda neutralises acids. Dihydrogen phosphate, \(\mathrm{H_2PO_4^-}\), goes the other way: its \(K_a\) of \(6.2 \times 10^{-8}\) is far larger than its \(K_b\) of about \(1.3 \times 10^{-12}\), so \(\mathrm{NaH_2PO_4}\) gives an acidic solution.
A routine for any salt
1. Split the salt into its ions, using the dissociation equation. 2. Classify the cation: group 1, \(\mathrm{Ca^{2+}}\), \(\mathrm{Sr^{2+}}\) or \(\mathrm{Ba^{2+}}\) is neutral; ammonium or a small, highly charged metal ion is acidic. 3. Classify the anion: the conjugate base of a strong acid is neutral; that of a weak acid is basic; an amphiprotic anion needs its \(K_a\) and \(K_b\) compared. 4. Combine: one reacting ion sets the pH; two reacting ions are compared by \(K_a\) and \(K_b\). 5. For a number, use \(K_a K_b = K_w\) to get the constant you need, then solve exactly as for any weak acid or base.
Common mistakes to avoid
First, assuming every salt solution is neutral because it came from a neutralisation. Second, using the parent acid's \(K_a\) for its anion instead of \(K_b = K_w/K_a\). Third, calling chloride or nitrate basic: conjugates of strong acids have negligible base strength. Fourth, forgetting that \(\mathrm{HSO_4^-}\), although the conjugate base of a strong acid, is itself a weak acid, so \(\mathrm{NaHSO_4}\) is acidic. Fifth, giving the pOH of a basic salt as its pH. Sixth, ignoring metal ions such as \(\mathrm{Al^{3+}}\) and \(\mathrm{Fe^{3+}}\) because their formulas contain no hydrogen.
Key takeaways
Salt solutions are acidic, basic or neutral depending on how their ions react with water, a process called hydrolysis. Cations of strong bases and anions of strong acids are bystanders. Conjugate acids of weak bases, such as ammonium, and small, highly charged hydrated metal ions are weak acids. Conjugate bases of weak acids, such as acetate and fluoride, are weak bases. Get the needed constant from Ka × Kb = Kw, then solve as for any weak acid or base. When both ions react, or an ion is amphiprotic, the larger of Ka and Kb decides.
Flashcards
Flashcard
Reaction of a salt's ion with water, giving H₃O⁺ or OH⁻
Test your understanding
Question 1 of 5
Which salt gives a basic solution when dissolved in water?
Question 2 of 5
What is the pH of 0.25 M sodium acetate at 25 °C? (Ka of acetic acid = 1.8 × 10⁻⁵)
Question 3 of 5
For ammonium fluoride, NH₄F, Ka of NH₄⁺ is 5.6 × 10⁻¹⁰ and Kb of F⁻ is 1.5 × 10⁻¹¹. Its solution is:
Question 4 of 5
Why is a solution of aluminium chloride, AlCl₃, acidic?
Question 5 of 5
What is the pH of 0.050 M ammonium nitrate, NH₄NO₃, at 25 °C? (Kb of NH₃ = 1.8 × 10⁻⁵)
