Chemistry › Section G · Chemical bonding and molecular geometry › Topic G.5
Strengths of ionic and covalent bonds
Every chemical reaction breaks some bonds and makes others, so the energy a reaction gives out or takes in comes down to bond strengths. Tables of bond enthalpies let you estimate ΔH without a calorimeter, and a Hess's law cycle reveals how strongly the ions in a salt hold together.
Measuring a bond's strength
A bond's strength is the energy needed to break it. For a covalent bond, the bond dissociation enthalpy, D, is the enthalpy change for breaking one mole of that bond in gaseous molecules into gaseous atoms. For hydrogen,
D is always positive, because separating bonded atoms always takes energy. Running the change backwards, forming one mole of H–H bonds from atoms releases the same 436 kJ. A bigger D means a stronger bond.
Average bond enthalpies
In a molecule with several bonds, the bonds do not all cost the same to break: after one C–H bond in methane breaks, the remaining fragment holds its hydrogens differently. Tables therefore give average bond enthalpies, averaged over many different compounds. Typical values, in kJ mol⁻¹, are H–H 436, C–H 413, C–C 348, C=C 614, O–H 463, N–H 391, O=O 498, N≡N 945, and C=O 799 in carbon dioxide. With these, breaking all four C–H bonds in a mole of methane takes about \(4 \times 413 = 1652\) kJ. Because they are averages, they give estimates, not exact answers.
Bond order, length and strength
Sharing more electron pairs between the same two atoms pulls them closer and holds them more tightly. For carbon, the single bond C–C is 154 pm long with D = 348 kJ mol⁻¹, the double bond C=C 134 pm and 614, and the triple bond C≡C 120 pm and 839. So triple bonds are the shortest and strongest, and single bonds the longest and weakest. Notice that a double bond is less than twice as strong as a single one. Bonds to atoms further down a group are longer and usually weaker: H–F 567, H–Cl 431, H–Br 366 and H–I 299 kJ mol⁻¹.
Estimating ΔH from bond enthalpies
Picture a gas-phase reaction in two stages: first break every bond in the reactants, which costs energy, then form every bond in the products, which releases energy. So
Note the order, broken minus formed, which is the reverse of the products-minus-reactants formula used with formation enthalpies. If the bonds formed are stronger in total than those broken, ΔH is negative and the reaction is exothermic; if weaker, ΔH is positive and it is endothermic. Draw Lewis structures first, so you count every single, double and triple bond correctly.
Worked example: burning methane
Estimate ΔH for
1. Bonds broken: 4 C–H and 2 O=O, so \(4(413) + 2(498) = 2648\) kJ. 2. Bonds formed: 2 C=O and 4 O–H, so \(2(799) + 4(463) = 3450\) kJ. 3. \(\Delta H \approx 2648 - 3450 = -802\) kJ. 4. The sign is negative: the strong C=O and O–H bonds made release more energy than the bonds broken absorb, so the reaction is exothermic. 5. Check with formation enthalpies: \([-393.5 + 2(-241.8)] - [-74.6] = -802.5\) kJ, close to the estimate. The familiar −890 kJ is for liquid water; condensing 2 mol of steam releases another 88.0 kJ.
Worked example: making ammonia
The Haber process makes ammonia for fertilisers: \(\mathrm{N_2(g) + 3H_2(g) \rightarrow 2NH_3(g)}\). Estimate ΔH. 1. Bonds broken: one N≡N and three H–H, so \(945 + 3(436) = 2253\) kJ. 2. Bonds formed: each \(\mathrm{NH_3}\) has three N–H bonds, so two molecules have six: \(6(391) = 2346\) kJ. 3. \(\Delta H \approx 2253 - 2346 = -93\) kJ, exothermic. 4. Check: with \(\Delta H^\circ_f(\mathrm{NH_3, g}) = -45.9\) kJ mol⁻¹, the reaction gives \(2(-45.9) = -91.8\) kJ. The estimate is within about 1 kJ, and the sign agrees. The very strong triple bond in \(\mathrm{N_2}\) is why the reaction needs a catalyst and high temperature to run at a useful rate.
Lattice energy
Ionic bond strength is measured by the lattice energy, the energy needed to separate one mole of an ionic solid into its gaseous ions:
With this convention lattice energies are positive. Some books use the reverse process, ions forming the solid, and quote negative values, so always check which is meant; either way, a larger magnitude means a more strongly held lattice. Lattice energies cannot be measured directly, so they are calculated, as the Born-Haber cycle below shows.
What makes a lattice strong
The attraction between ions follows Coulomb's law, so the lattice energy grows with the ion charges and shrinks with the distance between ion centres, \(r_0\), the sum of the ionic radii:
Doubling both charges multiplies the top by four. Magnesium oxide (2+ and 2−) has a lattice energy of about 3,800 kJ mol⁻¹, about four times that of sodium fluoride (1+ and 1−), 923 kJ mol⁻¹, whose ions are a similar distance apart. Size matters too: down the sodium halides, as the anion grows, the values fall from NaF 923 through NaCl 787 and NaBr 747 to NaI 704 kJ mol⁻¹.
The Born-Haber cycle
The Born-Haber cycle is Hess's law applied to forming an ionic solid. Making sodium chloride from its elements in one step has ΔH°f = −411.2 kJ mol⁻¹. The same change can be split into steps: turn solid sodium into gaseous atoms (sublimation); remove an electron from each sodium atom (ionisation energy); break half a mole of \(\mathrm{Cl_2}\) into atoms; add an electron to each chlorine atom (electron affinity); and finally let the gaseous ions come together as a solid, which releases the lattice energy, so that step's ΔH is \(-\Delta H_{\text{lattice}}\). Because enthalpy is a state function, the steps must add up to ΔH°f, and the one unknown, the lattice energy, can be solved for.
Worked example: the lattice energy of sodium chloride
Use these values, in kJ mol⁻¹: sublimation of Na +107.5; first ionisation energy of Na +495.8; half the Cl–Cl bond enthalpy +121.3; electron affinity of Cl −348.6; ΔH°f of NaCl(s) −411.2. 1. Write the cycle: \(\Delta H^\circ_f = 107.5 + 495.8 + 121.3 + (-348.6) + (-\Delta H_{\text{lattice}})\). 2. The first four steps sum to +376.0 kJ. 3. So \(-411.2 = 376.0 - \Delta H_{\text{lattice}}\), giving \(\Delta H_{\text{lattice}} = 376.0 + 411.2 = +787.2\), about 787 kJ mol⁻¹. 4. Check: only the electron affinity and the lattice step are exothermic, and the lattice step is the big one, as expected. Lattice energies, from several hundred to many thousands of kJ mol⁻¹, look much larger than single covalent bonds (about 150 to 500), but each involves many ion attractions, not one pair of atoms.
Common mistakes to avoid
First, subtracting the wrong way: bond-enthalpy estimates are bonds broken minus bonds formed. Second, missing bonds: two \(\mathrm{NH_3}\) molecules contain six N–H bonds, and \(\mathrm{O_2}\) has a double bond. Third, using bond enthalpies for liquids or solids; they apply to gases, which is why the methane estimate matches steam, not liquid water. Fourth, mixing lattice-energy sign conventions. Fifth, in a Born-Haber cycle, forgetting to halve the Cl–Cl bond enthalpy, or giving the electron affinity step the wrong sign.
Key takeaways
Bond dissociation enthalpy is the always-positive energy to break a mole of a bond in the gas phase; tables give averages, so they yield estimates. More shared pairs mean shorter, stronger bonds. ΔH ≈ Σ D(broken) − Σ D(formed): negative, exothermic, when the bonds formed are stronger. Lattice energy, the energy to separate an ionic solid into gaseous ions, increases with ion charge and decreases with ion size. The Born-Haber cycle uses Hess's law to find it: for NaCl, about 787 kJ mol⁻¹.
Flashcards
Flashcard
Enthalpy change to break one mole of a bond in the gas phase
Test your understanding
Question 1 of 5
Using average bond enthalpies H–H 436, Br–Br 193 and H–Br 366 kJ mol⁻¹, estimate ΔH for H₂(g) + Br₂(g) → 2HBr(g).
Question 2 of 5
Which compound has the largest lattice energy?
Question 3 of 5
Which carbon-carbon bond is both the shortest and the strongest?
Question 4 of 5
In the Born-Haber cycle for sodium chloride, which step releases energy?
Question 5 of 5
A bond-enthalpy estimate for burning methane gives about −802 kJ, but the standard enthalpy of combustion is about −890 kJ mol⁻¹. What mainly explains the gap?
