Chemistry › Section E · Thermochemistry › Topic E.1

Energy basics

Every chemical and physical change moves energy around, usually as heat. Before you can measure or predict that heat, you need a precise vocabulary (energy, temperature, heat, system, surroundings) and one workhorse equation, q = mcΔT.

Energy in every change

Burning natural gas heats a home, digesting food powers your muscles, and an instant cold pack chills a sprained ankle. Thermochemistry is the study of the heat absorbed or released in changes like these. Energy is the capacity to do work or to supply heat. Work, in its simplest sense, means moving matter against an opposing force, such as lifting a box or a gas pushing back the atmosphere as it expands.

Forms of energy, and their conservation

Kinetic energy is energy of motion, such as a moving piston or molecules rushing about in a gas. Potential energy is stored energy that depends on position, arrangement or composition, such as water behind a dam. Chemical energy is potential energy stored in the arrangement of electrons and nuclei in substances. When methane burns, its atoms rearrange into carbon dioxide and water, which store less chemical energy, and the difference is released as heat and light. The law of conservation of energy says energy changes form but is never created or destroyed: whatever a reacting system loses, its surroundings gain.

Thermal energy, temperature and heat

Chemists keep these three words apart. Thermal energy is the kinetic energy of the random motion of a sample's particles, so it grows with the amount of matter. Temperature measures the average kinetic energy of those particles and does not depend on the amount: a full bath at 40 °C holds far more thermal energy than a cup of tea at 80 °C. Heat, symbol q, is thermal energy transferred because of a temperature difference. On its own it flows from the hotter body to the cooler one until both reach the same temperature, a state called thermal equilibrium.

System, surroundings and the sign of q

The system is the part being studied, such as the reacting chemicals; the surroundings are everything else, including the water, the container and the air. An exothermic process releases heat from the system to the surroundings, which warm up: burning fuel, an iron-powder hand warmer, or water freezing. An endothermic process absorbs heat from the surroundings, which cool down: ice melting, water boiling, or ammonium nitrate dissolving in an instant cold pack. Signs are stated from the system's point of view: q is negative when the system releases heat and positive when it absorbs heat.

Units of energy

The SI unit of energy is the joule (J): 1 J = 1 kg m² s⁻², roughly the energy needed to lift a small apple through 1 metre. Chemical energy changes often run to thousands of joules, so the kilojoule (1 kJ = 1000 J) is common. The calorie (cal), first described as the heat needed to warm 1 g of water by 1 °C, is now defined as exactly 4.184 J. A food Calorie, with a capital C, is a kilocalorie, 4.184 kJ, so a snack labelled 250 Calories supplies about \(250 \times 4.184 \approx 1.05 \times 10^3\) kJ.

Heat capacity and specific heat

Heat capacity, C, is the heat needed to raise a whole object's temperature by 1 °C: \(C = \frac{q}{\Delta T}\), in J °C⁻¹. It is extensive: a 2 kg iron pan has twice the heat capacity of a 1 kg iron pan. Specific heat, c, is the heat needed to raise 1 gram of a substance by 1 °C: \(c = \frac{q}{m\Delta T}\), in J g⁻¹ °C⁻¹. It is intensive, a property of the material alone, so both pans share iron's value of 0.449 J g⁻¹ °C⁻¹. Molar heat capacity is the same idea per mole. A change of 1 °C equals a change of 1 K, so J g⁻¹ °C⁻¹ and J g⁻¹ K⁻¹ are the same unit.

Water's unusually high specific heat

Liquid water's specific heat, 4.184 J g⁻¹ °C⁻¹, is far higher than that of aluminium (0.897), iron (0.449) or copper (0.385 J g⁻¹ °C⁻¹). Give equal masses of water and copper the same amount of heat, and the copper's temperature rises about \(4.184 \div 0.385 \approx 11\) times as much. That is why oceans warm and cool slowly, keeping coastal climates milder than inland ones. Specific heat depends on phase (ice is about 2.1 J g⁻¹ °C⁻¹) and varies slightly with temperature, which we ignore here.

Calculating heat: q = mcΔT

Rearranging the definition of specific heat gives the central equation:

q = mc\Delta T, \qquad \Delta T = T_{\text{final}} - T_{\text{initial}}

With m in grams and c in J g⁻¹ °C⁻¹, q comes out in joules. The sign takes care of itself: warming gives positive ΔT and q (heat absorbed); cooling gives negative ΔT and q (heat released). A 1.20 kg iron pan cooling from 180.0 °C to 25.0 °C has \(q = (1.20 \times 10^3)(0.449)(-155.0) \approx -8.35 \times 10^4\) J, so it gives 83.5 kJ to its surroundings. The equation applies only while nothing melts, boils or reacts.

Worked example: heating water for tea

How much heat raises 250.0 g of water from 20.0 °C to 85.0 °C? 1. List the data: m = 250.0 g, c = 4.184 J g⁻¹ °C⁻¹, ΔT = 85.0 − 20.0 = 65.0 °C. 2. Substitute: \(q = 250.0 \times 4.184 \times 65.0 = 67{,}990\) J. 3. Round: ΔT has three significant figures, so q = 6.80 × 10⁴ J, or 68.0 kJ. 4. Check: the water warmed, so q is positive, and 250 × 4 × 65 = 65,000 J is close to the exact answer.

Worked example: identifying a metal

An 82.5 g block of an unknown metal absorbs 1.52 kJ of heat, and its temperature rises from 21.3 °C to 41.8 °C. Which metal could it be? 1. Convert the heat to joules: 1.52 kJ = 1520 J. 2. Find the temperature change: ΔT = 41.8 − 21.3 = 20.5 °C. 3. Rearrange q = mcΔT and substitute: \(c = \frac{q}{m\Delta T} = \frac{1520}{82.5 \times 20.5} = 0.899\) J g⁻¹ °C⁻¹. 4. Compare with known values: aluminium 0.897, iron 0.449, copper 0.385, so the metal is very likely aluminium. 5. Check: 82.5 × 0.897 × 20.5 ≈ 1517 J, which agrees with 1520 J to within rounding.

Common mistakes to avoid

First, confusing heat with temperature: a large cool object can hold more thermal energy than a small hot one. Second, writing ΔT as initial minus final, which flips the sign of q. Third, mixing units: with c in J g⁻¹ °C⁻¹, q = mcΔT gives joules, not kilojoules. Fourth, confusing heat capacity (an object's) with specific heat (a material's). Fifth, expecting an endothermic process to feel hot: it draws heat from its surroundings, so they get colder. Sixth, treating a calorie and a food Calorie as equal; a Calorie is 1000 calories.

Key takeaways

Energy is the capacity to do work or supply heat, and it is conserved. Temperature measures average particle kinetic energy; heat, q, is energy transferred from hotter to cooler. Exothermic processes release heat (q negative) and warm the surroundings; endothermic processes absorb heat (q positive) and cool them. 1 cal = 4.184 J and 1 Cal = 4.184 kJ. Heat capacity belongs to an object, specific heat to a material; water's is high at 4.184 J g⁻¹ °C⁻¹. Heat follows q = mcΔT, with ΔT = final minus initial.

Flashcards

Flashcard

Energy

The capacity to do work or to supply heat

Work means moving matter against an opposing force.

Test your understanding

Question 1 of 5

How much heat is needed to warm 150.0 g of water from 20.0 °C to 45.0 °C?

Question 2 of 5

A salt dissolves in a beaker of water and the water gets colder. Taking the dissolving salt as the system, which description is correct?

Question 3 of 5

A 1 kg block and a 2 kg block are both made of iron. Which statement is correct?

Question 4 of 5

A 60.0 g sample of a metal absorbs 539 J of heat and its temperature rises by 20.0 °C. What is its specific heat?

Question 5 of 5

Equal masses of liquid water and copper absorb the same amount of heat. What happens to their temperatures?

← Previous topicNext topic →