Chemistry › Section L · Kinetics › Topic L.7
Catalysis
Catalysts make reactions faster without being used up, so a small amount can work for a long time. They run the chemistry of every living cell, clean car exhaust and make fertiliser, and the CFC story shows they can do harm as well.
Catalysts everywhere
The factors topic introduced catalysts as substances that speed reactions up and are recovered unchanged. They matter far beyond the lab bench. Almost every reaction in your body is catalysed by an enzyme; without them, digesting a meal would take years. The large majority of industrial chemical processes use catalysts, from refining petrol to making plastics and the ammonia in fertiliser. Car exhausts pass through catalytic converters. A catalyst can even be a pollutant: chlorine atoms from old refrigerants destroy ozone catalytically. Using the ideas of activation energy and mechanisms from the last two topics, you can now see how catalysts work.
How a catalyst works
A catalyst provides a different mechanism for the reaction, one with a lower activation energy. It takes part in an early step and is regenerated in a later one, so it is not consumed. On an energy diagram, the catalysed path has a lower peak, or several smaller peaks, but it starts at the same reactants and ends at the same products, so ΔH is unchanged. Because the forward and reverse barriers are both lowered by the same amount, a catalyst speeds up the reverse reaction exactly as much as the forward one. It therefore helps a reaction reach equilibrium sooner but does not change the equilibrium position, a point the equilibrium chapter builds on.
Worked example: how much faster?
An enzyme lowers a reaction's activation energy from 75 kJ mol⁻¹ to 50 kJ mol⁻¹ at body temperature, 310 K. Assuming the Arrhenius factor A is unchanged, estimate the speed-up. 1. Write the ratio: \(\frac{k_\text{cat}}{k} = \frac{A e^{-E_{a,\text{cat}}/RT}}{A e^{-E_a/RT}} = e^{(E_a - E_{a,\text{cat}})/RT}\). 2. Difference: \(25\ \mathrm{kJ\,mol^{-1}} = 2.5 \times 10^4\ \mathrm{J\,mol^{-1}}\). 3. Exponent: \(\frac{2.5 \times 10^4}{8.314 \times 310} = 9.70\). 4. Ratio: \(e^{9.70} = 1.6 \times 10^4\), so about 16,000 times faster. 5. Check ΔH: both paths link the same reactants and products, so ΔH is identical. Real enzymes often do far better, speeding reactions by factors of millions or more.
Homogeneous catalysis
A homogeneous catalyst is in the same phase as the reactants, usually all gases or all dissolved in one solution. It typically reacts with a reactant to form an intermediate, which then reacts further and releases the catalyst. The iodide ions that speed the breakdown of hydrogen peroxide, met in the mechanisms topic, are one example: \(\mathrm{I^-}\) and \(\mathrm{H_2O_2}\) are both dissolved. A damaging example is high in the stratosphere. Ultraviolet light breaks chlorofluorocarbons (CFCs) apart, releasing chlorine atoms, and in the gas phase each chlorine atom can destroy thousands of ozone molecules before it is locked away in a less reactive compound.
Worked example: the chlorine cycle
Two steps destroy ozone: \(\mathrm{Cl + O_3 \rightarrow ClO + O_2}\), then \(\mathrm{ClO + O \rightarrow Cl + O_2}\). 1. Add the steps:
2. Cancel Cl and ClO from both sides: \(\mathrm{O_3 + O \rightarrow 2O_2}\). 3. Check the atoms: four O on each side. 4. Classify: Cl is used in step 1 and regenerated in step 2, so it is the catalyst; ClO is made in step 1 and used in step 2, so it is an intermediate. 5. Interpret: since Cl comes back each cycle, one atom keeps repeating it. That is why the Montreal Protocol of 1987 phased out CFCs, and the ozone layer is now slowly recovering.
Heterogeneous catalysis
A heterogeneous catalyst is in a different phase from the reactants, usually a solid with gas or liquid reactants. The reaction happens on its surface in four stages: the reactants are adsorbed, meaning held on the surface; their bonds are weakened, or activated; they react; and the products desorb, leaving the site free. In a car's catalytic converter, platinum, palladium and rhodium help reactions such as \(\mathrm{2CO + O_2 \rightarrow 2CO_2}\) and \(\mathrm{2NO + 2CO \rightarrow N_2 + 2CO_2}\). The Haber process passes nitrogen and hydrogen over iron at about 400–450 °C. Surfaces can be poisoned: lead binds to converter metals, one reason leaded petrol was phased out.
Enzymes
Enzymes are biological catalysts, almost all of them proteins. The reactant, called the substrate, binds in a pocket on the enzyme, the active site, whose shape and charges fit that substrate closely. The active site holds the substrate in the right orientation and stabilises the transition state, lowering the activation energy. Enzymes are highly specific, usually catalysing just one reaction. Carbonic anhydrase, which speeds \(\mathrm{CO_2 + H_2O \rightleftharpoons HCO_3^- + H^+}\) in red blood cells, can handle up to about a million molecules per second at each active site. Enzymes work best at a particular temperature and pH; too much heat or the wrong pH changes their shape, and they stop working.
Enzyme kinetics and inhibitors
At low substrate concentration, an enzyme-catalysed rate rises almost in proportion to [S]. At high [S], every active site is busy, so adding more substrate barely helps and the rate levels off at a maximum, \(V_\text{max}\). The Michaelis constant, \(K_M\), is the substrate concentration that gives half that maximum. An inhibitor is a molecule that slows an enzyme, often by occupying its active site, and many medicines work this way. Kitchens show it too: cut apples brown because an enzyme catalyses oxidation by air, and lemon juice slows this, partly because its acidity takes the enzyme away from its best pH and partly because its vitamin C turns the first oxidation product back into the starting compound.
Common mistakes to avoid
First, saying a catalyst is used up because it takes part in the reaction; it is regenerated. Second, claiming a catalyst changes ΔH; only the activation energy changes. Third, thinking a catalyst shifts the equilibrium towards products; it speeds forward and reverse reactions equally. Fourth, mixing up intermediates and catalysts: in the chlorine cycle ClO is the intermediate and Cl the catalyst. Fifth, confusing the phases: a solid with gaseous reactants is heterogeneous. Sixth, assuming more substrate always speeds an enzyme reaction; it levels off at \(V_\text{max}\).
Key takeaways
A catalyst offers a mechanism with a lower activation energy and is regenerated, so it is not consumed. It leaves ΔH and the equilibrium position unchanged, speeding forward and reverse reactions alike. Homogeneous catalysts share the reactants' phase, like chlorine atoms destroying ozone; heterogeneous catalysts are usually solids whose surfaces adsorb, activate, react and release, as in catalytic converters and the Haber process. Enzymes are specific protein catalysts with active sites; their rates level off at Vmax, KM gives half of Vmax, and inhibitors slow them.
Flashcards
Flashcard
Speeds a reaction by giving it a lower-Ea mechanism; regenerated, not consumed
Test your understanding
Question 1 of 5
Which statement correctly describes the effect of a catalyst on a reaction?
Question 2 of 5
A catalyst lowers a reaction's activation energy by 20.0 kJ mol⁻¹ at 298 K. Assuming A is unchanged, about how many times faster is the catalysed reaction?
Question 3 of 5
In the ozone-destroying steps Cl + O₃ → ClO + O₂ and ClO + O → Cl + O₂, which species is the catalyst?
Question 4 of 5
A catalyst is described as heterogeneous when it:
Question 5 of 5
An enzyme has Vmax = 40 µmol min⁻¹. What is the rate when the substrate concentration equals KM?
