Chemistry › Section M · Equilibrium › Topic M.1
Chemical equilibria
Many reactions never use up their reactants completely. Instead they settle into a balance in which the forward and reverse reactions keep running at the same rate, so the amounts stop changing even though nothing has stopped.
A reaction that stops short
Seal hydrogen gas and violet iodine vapour in a hot flask, at about 450 °C, and the two combine to form colourless hydrogen iodide. You might expect the violet colour to vanish once the reaction is over. It never does. The colour fades for a while, then holds steady at a paler shade, however long you wait. Analysis shows that the flask still contains all three gases. The reaction has not run out of reactants; it has reached a point where reactants and product coexist in fixed amounts. That state is chemical equilibrium, and this topic explains what is happening inside it.
Reversible reactions and the double arrow
A reversible reaction can run in both directions: the forward reaction turns reactants into products, and the reverse reaction turns products back into reactants. A double half-headed arrow shows this:
By convention, the species on the left are still called the reactants and those on the right the products. In principle every reaction is reversible. A reaction said to go to completion is one whose balance lies so far towards the products that the reactants left over are too small to detect.
How the two rates come into balance
When hydrogen and iodine are first mixed, there is no hydrogen iodide, so only the forward reaction can run. As the reactants are used up their concentrations fall, and the forward reaction slows. Meanwhile hydrogen iodide builds up, so the reverse reaction, which needs HI molecules to collide, speeds up. The falling forward rate and the rising reverse rate eventually meet. From then on, every second the forward reaction makes exactly as much HI as the reverse reaction destroys, so there is no net change. A system is at equilibrium when the forward and reverse rates are equal and the concentrations are constant.
Dynamic, not stopped
Chemical equilibrium is dynamic: both reactions keep running, at equal rates. Picture a shop with a revolving door, where customers go in and out at the same rate. The number inside stays steady while the individual people keep changing. Experiments confirm the molecular picture. If solid sodium chloride made with radioactive sodium-22 is stirred into a saturated salt solution, the dissolved concentration does not change, yet radioactivity soon appears in the solution. Labelled ions have dissolved while an equal number of unlabelled ions crystallised onto the solid. Nothing visible changes, but particles are still crossing in both directions.
Physical equilibria
Equilibrium is not limited to chemical reactions. In a sealed bottle of water, evaporation and condensation reach equal rates, and the vapour above the liquid settles at the water's vapour pressure, as the topic on phase transitions showed. In a saturated solution, dissolving and crystallising balance, as in the solubility topic. These physical equilibria share every feature of chemical ones: a closed system, a constant temperature, two opposing processes running at equal rates, and properties such as pressure, colour or concentration that no longer change.
Worked example: watching a mixture settle
A sealed flask at about 450 °C starts with 0.100 M H₂ and 0.100 M I₂. Illustrative measurements of [HI] at equal time intervals are 0, 0.088, 0.130, 0.150, 0.156 and 0.156 M. Find [H₂] at each reading and decide when equilibrium is reached. 1. The equation shows that forming 2 mol of HI uses 1 mol of H₂, so [H₂] = 0.100 − [HI]/2. 2. The readings give [H₂] = 0.100, 0.056, 0.035, 0.025, 0.022 and 0.022 M. 3. The last two readings match for both gases, so the mixture has reached equilibrium by the fifth reading. 4. Check: [I₂] equals [H₂] throughout, because they start equal and react 1 : 1. Note that the concentrations are constant at equilibrium, not equal to each other.
Worked example: approaching from the other side
A second flask at the same temperature starts with 0.200 M HI and no hydrogen or iodine. What happens? 1. Only the reverse reaction can run at first, so HI decomposes and violet iodine appears. 2. The forward reaction starts as soon as H₂ and I₂ exist, and speeds up as they accumulate. 3. Measurements settle at [HI] = 0.156 M and [H₂] = [I₂] = 0.022 M, exactly the mixture reached from the forward direction. 4. Check that this is fair: 0.200 M HI holds the same hydrogen and iodine atoms as 0.100 M H₂ plus 0.100 M I₂, and the temperature and volume match. With the same atoms, temperature and volume, the same equilibrium is reached from either direction.
Where the balance lies
The composition at equilibrium varies enormously from one reaction to another. Methane burning in oxygen has an equilibrium so far towards carbon dioxide and water that no methane can be detected afterwards. Nitrogen and oxygen in air at room temperature lie almost entirely as N₂ and O₂: the nitrogen monoxide they could form is negligible, although appreciable amounts form at the high temperatures inside a car engine. The hydrogen iodide mixture holds substantial amounts of both sides. The next topic puts a number on this position: the equilibrium constant.
Conditions for equilibrium
Equilibrium needs a closed system, one that matter cannot enter or leave, held at a constant temperature. In an open system a product can escape before the reverse reaction can use it. When limestone is heated in an open kiln,
the carbon dioxide is carried away, so the decomposition keeps going until the limestone is used up. In a sealed vessel at the same temperature, the reaction stops gaining ground once the carbon dioxide reaches a definite pressure, and the solid carbonate and oxide then sit in equilibrium with the gas.
Common mistakes to avoid
First, thinking reactions stop at equilibrium; both directions continue at equal rates. Second, confusing equal rates with equal concentrations: at equilibrium the concentrations are constant, but they are rarely equal to each other. Third, assuming the reactants are used up; at equilibrium every species in the equation is present. Fourth, forgetting the conditions: an open system, or a temperature that keeps changing, cannot settle at equilibrium. Fifth, thinking an equilibrium can only be reached from the reactant side; starting from the products gives the same mixture when the atoms, temperature and volume match.
Key takeaways
A reversible reaction runs both ways and is written with ⇌. As a reaction proceeds, the forward rate falls and the reverse rate rises until they are equal; from then on the concentrations stay constant. This balance is dynamic: particles keep reacting in both directions, as tracer experiments show. Physical changes such as evaporation and dissolving reach the same kind of equilibrium. Equilibrium needs a closed system at constant temperature, and the same state is reached from either side. Its position can lie towards products, towards reactants, or in between.
Flashcards
Flashcard
A reaction that can run in both the forward and reverse directions
Test your understanding
Question 1 of 5
Which statement describes a reaction mixture at chemical equilibrium?
Question 2 of 5
A flask starts with 0.100 M H₂ and 0.100 M I₂. At equilibrium [HI] = 0.156 M. What is [H₂] at equilibrium?
Question 3 of 5
Solid NaCl containing radioactive sodium-22 is added to a saturated NaCl solution. Later the solution is radioactive, but its concentration has not changed. What does this show?
Question 4 of 5
Calcium carbonate is heated strongly in an open kiln and decomposes completely to calcium oxide and carbon dioxide. Why does it not reach equilibrium?
Question 5 of 5
One sealed flask starts with 0.100 M H₂ and 0.100 M I₂, and an identical flask at the same temperature starts with 0.200 M HI only. What can you predict about their equilibrium mixtures?
