Chemistry › Section Q · Electrochemistry › Topic Q.4

Potential, free energy, and equilibrium

A cell's voltage is more than a number on a meter: it measures the free energy change of the reaction inside, and through that its equilibrium constant. It also explains why a battery's voltage sags as it runs down.

Three measures of one driving force

Earlier topics gave three ways to judge whether a reaction will go. The Gibbs free energy topic used the sign of ΔG; the equilibrium topics compared the reaction quotient Q with the equilibrium constant K; the previous topic used the sign of \(E_{\text{cell}}\). For a redox reaction these are not three separate facts but one fact measured three ways. A spontaneous reaction has a negative ΔG and a positive cell potential, and it keeps running until Q reaches K. This topic sets out the exact links between them and shows how cell potential changes when concentrations are not standard.

From volts to joules: ΔG = −nFE

The maximum electrical work a cell can do equals the charge it moves times the potential that pushes it. One mole of electrons carries a charge called the Faraday constant: \(F = N_A e = 96{,}485\ \mathrm{C\ mol^{-1}}\). If n moles of electrons pass for each mole of reaction as written, the charge is nF, and the free energy change is

\Delta G = -nFE_{\text{cell}} \qquad \Delta G^\circ = -nFE^\circ_{\text{cell}}

The minus sign matches the conventions: a positive cell potential gives a negative ΔG, a spontaneous reaction. Because coulombs times volts give joules, the answer comes out in joules per mole of reaction, so divide by 1000 for kJ.

Worked example: free energy from a cell potential

A zinc and silver cell,

\mathrm{Zn(s) + 2Ag^+(aq) \rightarrow Zn^{2+}(aq) + 2Ag(s)}\,,

has \(E^\circ_{\text{cell}} = +1.56\) V. Find ΔG°. 1. Count electrons: each zinc atom loses two, and two silver ions gain one each, so n = 2. 2. Substitute: \(\Delta G^\circ = -2 \times 96{,}485\ \mathrm{C\ mol^{-1}} \times 1.56\ \mathrm{V} = -3.01 \times 10^5\ \mathrm{J\ mol^{-1}}\). 3. Convert: ΔG° = −301 kJ per mole of zinc. 4. Check: the sign is negative, as a positive \(E^\circ\) requires. Doubling the equation would double n and ΔG° to −602 kJ, but \(E^\circ\) would stay 1.56 V, because ΔG is extensive and E is not.

E° and the equilibrium constant

The Gibbs free energy topic showed that \(\Delta G^\circ = -RT\ln K\). Setting this equal to \(-nFE^\circ\) gives

E^\circ_{\text{cell}} = \frac{RT}{nF}\ln K

At 298.15 K, \(RT/F = 0.02569\) V, and converting to base-10 logarithms multiplies this by 2.303, giving 0.0592 V:

E^\circ_{\text{cell}} = \frac{0.0592\ \mathrm{V}}{n}\log K \qquad K = 10^{nE^\circ/0.0592}

So the three signs always agree. If \(E^\circ > 0\), then \(\Delta G^\circ < 0\) and \(K > 1\): products are favoured at equilibrium. If \(E^\circ < 0\), then \(\Delta G^\circ > 0\) and \(K < 1\). If \(E^\circ = 0\), then \(K = 1\).

Worked example: an equilibrium constant from E°

Find \(E^\circ\), ΔG° and K at 25 °C for

\mathrm{Ni(s) + Cu^{2+}(aq) \rightarrow Ni^{2+}(aq) + Cu(s)}\,.

1. Copper(II) is reduced: \(E^\circ_{\text{cell}} = +0.34 - (-0.26) = +0.60\) V, with n = 2. 2. Free energy: \(\Delta G^\circ = -2 \times 96{,}485 \times 0.60 = -1.16 \times 10^5\) J, or −116 kJ. 3. Equilibrium: \(\log K = \frac{2 \times 0.60}{0.0592} = 20.3\), so \(K \approx 2 \times 10^{20}\). 4. Check by a second route: \(-RT\ln K = -8.314 \times 298.15 \times \ln(2 \times 10^{20}) \approx -116\) kJ. A K this large means the reaction goes essentially to completion. Because E° sits in an exponent, a change of only 0.01 V alters K about twofold, so report K to one significant figure.

The Nernst equation

Real cells rarely have every solute at 1 M. Substituting \(\Delta G = -nFE\) into \(\Delta G = \Delta G^\circ + RT\ln Q\) gives the Nernst equation:

E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{RT}{nF}\ln Q

At 25 °C this becomes

E_{\text{cell}} = E^\circ_{\text{cell}} - \frac{0.0592\ \mathrm{V}}{n}\log Q

Write Q from the balanced cell reaction exactly as for any equilibrium: products over reactants, each raised to its coefficient, with solids and liquid water left out and gases entered as pressures in bar. When Q < 1 the cell potential exceeds \(E^\circ\); when Q > 1 it falls below.

Worked example: a Daniell cell off standard

A zinc and copper cell,

\mathrm{Zn(s) + Cu^{2+}(aq) \rightarrow Zn^{2+}(aq) + Cu(s)}

with \(E^\circ = 1.10\) V, has \(\mathrm{[Zn^{2+}]} = 0.50\) M and \(\mathrm{[Cu^{2+}]} = 0.0050\) M. Find \(E_{\text{cell}}\) at 25 °C. 1. Electrons: n = 2. 2. Reaction quotient, leaving out the two solid metals: \(Q = \frac{[\mathrm{Zn^{2+}}]}{[\mathrm{Cu^{2+}}]} = \frac{0.50}{0.0050} = 100\). 3. Nernst: \(E = 1.10 - \frac{0.0592}{2}\log 100 = 1.10 - 0.0592 = 1.04\) V. 4. Check: Q > 1, so E should be below \(E^\circ\), and it is. As the cell runs, Q keeps rising, which is why the voltage of a working cell slowly falls.

Dead batteries and concentration cells

As any galvanic cell discharges, products build up and reactants are used, so Q rises towards K. When Q = K the reaction is at equilibrium, ΔG = 0 and \(E_{\text{cell}} = 0\): the battery is flat. A concentration cell shows the Nernst equation working alone. Both halves are the same couple, so \(E^\circ = 0\), but the concentrations differ. In

\mathrm{Cu\,|\,Cu^{2+}(0.010\ M)\,||\,Cu^{2+}(1.0\ M)\,|\,Cu}\,,

copper ions are reduced on the concentrated side and formed on the dilute side, so \(Q = 0.010/1.0\) and \(E = 0 - \frac{0.0592}{2}\log 0.010 = +0.0592\) V. The dilute side is always the anode. A pH meter's glass electrode works on a related principle, changing by about 59 mV per pH unit at 25 °C.

Common mistakes to avoid

First, taking n as a coefficient instead of the number of moles of electrons transferred in the balanced equation. Second, forgetting that \(-nFE\) comes out in joules, then mixing it with kJ. Third, using 0.0592 with a natural logarithm; it belongs with log base 10, while RT/nF goes with ln. Fourth, writing Q upside down, or including solids such as the metal electrodes. Fifth, using \(E^\circ\) when concentrations are not 1 M. Sixth, expecting a flat battery to read \(E^\circ\): at equilibrium it reads zero.

Key takeaways

\(\Delta G^\circ = -nFE^\circ_{\text{cell}}\), with \(F = 96{,}485\ \mathrm{C\ mol^{-1}}\) and n the moles of electrons transferred. Combined with \(\Delta G^\circ = -RT\ln K\), it gives \(E^\circ = (0.0592\ \mathrm{V}/n)\log K\) at 25 °C. Positive \(E^\circ\), negative ΔG° and K greater than 1 always go together. The Nernst equation, \(E = E^\circ - (0.0592\ \mathrm{V}/n)\log Q\) at 25 °C, gives the potential at any concentrations. As Q rises to K, E falls to zero. Concentration cells run on a concentration difference alone.

Flashcards

Flashcard

Faraday constant, F

96,485 C mol⁻¹, the charge on 1 mol of electrons

F = N_A × e.

Test your understanding

Question 1 of 5

A cell reaction transfers 2 mol of electrons and has E°cell = +0.46 V. What is ΔG° for the reaction?

Question 2 of 5

A redox reaction has a negative standard cell potential. What must be true of ΔG° and K?

Question 3 of 5

At 25 °C, a reaction with n = 2 has E°cell = +0.148 V. What is its equilibrium constant?

Question 4 of 5

For Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s), E° = 1.10 V. What is Ecell at 25 °C when [Zn²⁺] = 0.010 M and [Cu²⁺] = 1.0 M?

Question 5 of 5

A galvanic cell is left connected until its reaction reaches equilibrium. Which statement describes the cell then?

← Previous topicNext topic →