Chemistry › Section M · Equilibrium › Topic M.2

Equilibrium constants

Every equilibrium mixture, however it was started, obeys one simple rule at a given temperature: a particular ratio of concentrations always comes out the same. That number, the equilibrium constant, tells you where the balance lies and which way a mixture will move to reach it.

One number behind every equilibrium

In the previous topic, hydrogen and iodine at about 450 °C settled at 0.156 M HI with 0.022 M each of H₂ and I₂. Work out \(\frac{[\mathrm{HI}]^2}{[\mathrm{H_2}][\mathrm{I_2}]} = \frac{0.156^2}{0.022 \times 0.022} \approx 50\). Start the flask with different amounts, or from HI alone, and the individual concentrations change, but this ratio still comes out close to 50 at that temperature. The Norwegian chemists Cato Guldberg and Peter Waage proposed the general rule in 1864. It is called the law of mass action, and square brackets, as here, mean concentration in mol L⁻¹.

The reaction quotient, Q

For a general reaction \(a\mathrm{A} + b\mathrm{B} \rightleftharpoons c\mathrm{C} + d\mathrm{D}\), the reaction quotient is

Q_c = \frac{[\mathrm{C}]^c[\mathrm{D}]^d}{[\mathrm{A}]^a[\mathrm{B}]^b}

Products go on top and reactants underneath, each raised to the power of its coefficient in the balanced equation. Q can be worked out for any mixture at any moment, whether or not it is at equilibrium. For \(\mathrm{2SO_2(g) + O_2(g) \rightleftharpoons 2SO_3(g)}\), \(Q_c = \frac{[\mathrm{SO_3}]^2}{[\mathrm{SO_2}]^2[\mathrm{O_2}]}\). The subscript c shows that concentrations are used.

The equilibrium constant, K

When the mixture is at equilibrium, Q takes one fixed value, the equilibrium constant, \(K_c\). K depends on the reaction, on the way its equation is written, and on the temperature; it does not depend on the starting amounts. Strictly, each concentration is divided by a standard value of 1 M, so K is a pure number, and by convention it is written without units. Always quote the temperature with a K value, because changing the temperature changes K, a point the topic on Le Chatelier's principle develops.

Solids, liquids and heterogeneous equilibria

A homogeneous equilibrium has every species in one phase, such as a gas mixture. A heterogeneous equilibrium involves more than one phase. Pure solids and pure liquids are left out of Q and K, because their concentrations are fixed by their densities and do not change as the reaction proceeds. Water is also left out when it is the solvent. So for

\mathrm{CaCO_3(s) \rightleftharpoons CaO(s) + CO_2(g)}\,,

\(K_c = [\mathrm{CO_2}]\): at a given temperature the gas always settles at the same concentration, whatever the amounts of solid present, as long as both solids are there.

What the size of K tells you

A large K means the numerator wins: products dominate the equilibrium mixture. As a rough guide, K above about 10³ means mostly products, K below about 10⁻³ means mostly reactants, and values in between give appreciable amounts of both. For \(\mathrm{N_2(g) + O_2(g) \rightleftharpoons 2NO(g)}\) at 25 °C, K is around 10⁻³⁰, so air does not turn into nitrogen monoxide. The hydrogen iodide value, about 50, sits in between. K tells you nothing about speed: a reaction with an enormous K can still be very slow.

Q versus K: which way will it go?

Comparing Q with K predicts the direction of change. If \(Q < K\), there is too little product for equilibrium, so the forward reaction runs faster than the reverse until Q rises to K. If \(Q > K\), there is too much product, so the reverse reaction wins until Q falls to K. If \(Q = K\), the mixture is already at equilibrium and nothing changes overall. The system always moves so that Q approaches K, never the other way round.

Worked example: which way will it go?

For \(\mathrm{H_2(g) + I_2(g) \rightleftharpoons 2HI(g)}\), take K = 50 at about 450 °C. A flask holds 0.20 M HI, 0.050 M H₂ and 0.050 M I₂. Which way does it move? 1. Write Q: \(Q = \frac{[\mathrm{HI}]^2}{[\mathrm{H_2}][\mathrm{I_2}]}\). 2. Substitute: \(Q = \frac{0.20^2}{0.050 \times 0.050} = \frac{0.040}{0.0025} = 16\). 3. Compare: 16 < 50, so Q < K. 4. Conclusion: the net reaction runs forward, so [HI] rises and [H₂] and [I₂] fall until Q reaches 50. 5. Check: there is less HI than equilibrium needs relative to the reactants, so making more of it is sensible.

Gases: Kp and its link to Kc

For gases, partial pressures can replace concentrations, giving \(K_p\). For \(\mathrm{N_2(g) + 3H_2(g) \rightleftharpoons 2NH_3(g)}\), \(K_p = \frac{P_{\mathrm{NH_3}}^2}{P_{\mathrm{N_2}}P_{\mathrm{H_2}}^3}\). The ideal gas law turns each pressure into a concentration, \(P = \frac{n}{V}RT = cRT\), and substituting gives

K_p = K_c(RT)^{\Delta n}

Here \(\Delta n\) is the moles of gaseous products minus the moles of gaseous reactants, R = 0.08206 L atm mol⁻¹ K⁻¹, T is in kelvin and pressures are in atm. When \(\Delta n = 0\), as for the HI reaction, \(K_p = K_c\).

Worked example: converting Kc to Kp

For ammonia synthesis, \(K_c\) is about 0.105 at 472 °C. Find \(K_p\). 1. Temperature in kelvin: T = 472 + 273.15 = 745.15 K. 2. Count gas moles: 2 of product, 1 + 3 = 4 of reactants, so \(\Delta n = 2 - 4 = -2\). 3. RT = 0.08206 × 745.15 = 61.15. 4. Substitute: \(K_p = 0.105 \times 61.15^{-2} = \frac{0.105}{3739} = 2.81 \times 10^{-5}\). 5. Check: with RT greater than 1 and a negative \(\Delta n\), \(K_p\) must be smaller than \(K_c\), and it is.

Reversing, scaling and adding equations

K follows the equation exactly as written, so three rules apply. Reverse an equation and K becomes its reciprocal, 1/K, because products and reactants swap places. Multiply every coefficient by a factor n and K is raised to the power n: halving the equation takes the square root. Add two equations and the overall K is the product of their K values, \(K = K_1K_2\), because the shared species cancel when the expressions are multiplied. For example, if \(\mathrm{2SO_2 + O_2 \rightleftharpoons 2SO_3}\) has K = 250, then \(\mathrm{SO_3 \rightleftharpoons SO_2 + \tfrac{1}{2}O_2}\) has \(K = (1/250)^{1/2} = 0.063\).

Common mistakes to avoid

First, putting reactants on top: K is always products over reactants. Second, forgetting to raise each concentration to its coefficient. Third, including pure solids, pure liquids or solvent water in the expression. Fourth, reading Q < K backwards; a small Q means the reaction moves forward. Fifth, using Celsius temperatures, or the gas constant 8.314, in \(K_p = K_c(RT)^{\Delta n}\); use kelvin and 0.08206, and count only gas moles in \(\Delta n\). Sixth, multiplying K by 2 when an equation is doubled; K is squared.

Key takeaways

Q is products over reactants, each raised to its coefficient, for any mixture; at equilibrium it equals K, which depends only on the reaction as written and the temperature. Pure solids, pure liquids and solvent water are left out. A large K means mostly products and a small K mostly reactants, but K says nothing about speed. If Q < K the reaction goes forward; if Q > K it goes in reverse. For gases, \(K_p = K_c(RT)^{\Delta n}\). Reversing an equation inverts K, scaling it by n raises K to the power n, and adding equations multiplies their K values.

Flashcards

Flashcard

Law of mass action

At equilibrium, products over reactants (with coefficient powers) has a fixed value at a given temperature

Guldberg and Waage, 1864.

Test your understanding

Question 1 of 5

What is the Kc expression for C(s) + H₂O(g) ⇌ CO(g) + H₂(g)?

Question 2 of 5

For a reaction with K = 4.0 at a given temperature, a mixture has Q = 12. What happens as it moves towards equilibrium?

Question 3 of 5

For the gas reaction A(g) ⇌ 2B(g), Kc = 0.0200 at 400 K. What is Kp? (R = 0.08206 L atm mol⁻¹ K⁻¹)

Question 4 of 5

At a certain temperature, 2SO₂(g) + O₂(g) ⇌ 2SO₃(g) has K = 250. What is K for SO₃(g) ⇌ SO₂(g) + ½O₂(g) at the same temperature?

Question 5 of 5

At 25 °C, N₂(g) + O₂(g) ⇌ 2NO(g) has K around 10⁻³⁰. What does this tell you about air at 25 °C?

← Previous topicNext topic →