Chemistry › Section L · Kinetics › Topic L.5
Collision theory and activation energy
Molecules in a gas collide billions of times a second, yet most reactions are far slower than that would suggest. Collision theory explains why only a few collisions succeed, and the Arrhenius equation turns that idea into numbers, showing exactly how temperature controls a rate constant.
Why most collisions fail
Each molecule in air at room temperature collides with others several billion times every second. If every collision caused a reaction, all gas reactions would be over in a fraction of a second. Instead, a match can sit in its box for years, surrounded by oxygen, until friction from striking supplies a burst of energy. Once lit, the heat from the burning keeps the reaction going. Think of a boulder resting in a hollow at the top of a slope: it can release a great deal of energy rolling down, but only after something pushes it over the rim. Collision theory makes this picture precise.
The postulates of collision theory
Collision theory states three conditions for reaction. First, the reactant particles must collide; the rate depends on how often they do, which is why concentration matters. Second, a collision must have at least a minimum energy, the activation energy, \(E_a\), to break or loosen existing bonds. Third, the particles must meet in a suitable orientation, so that the atoms that need to bond actually come into contact. Only collisions that meet both the energy and orientation conditions produce products. Every other collision simply bounces the particles apart unchanged.
Orientation matters
In
the hydroxide ion must strike the carbon atom on the side opposite the bromine atom, so that the new C–O bond forms as the C–Br bond breaks. A hydroxide that hits the bromine end, or one of the hydrogen atoms, bounces off, however energetic the collision. For molecules with more complicated shapes, only a small fraction of possible approach directions work. That is one reason reactions of large molecules are often slow, and why enzymes, which hold reactants in exactly the right positions, are such effective catalysts.
Activation energy and the transition state
A reaction energy diagram plots energy against the reaction's progress. The reactants sit at one level and the products at another, and between them the path climbs to a peak. The arrangement at the top of the peak is the transition state, or activated complex: a short-lived structure in which old bonds are partly broken and new ones partly formed. It cannot be isolated. The height of the climb from reactants to the peak is \(E_a\). The difference between the product and reactant levels is ΔH, and the reverse reaction must climb from the products to the same peak, so
Worked example: reading an energy diagram
A reaction has \(E_a = 75\ \mathrm{kJ\,mol^{-1}}\) and \(\Delta H = -40\ \mathrm{kJ\,mol^{-1}}\). Find the activation energy of the reverse reaction. 1. The products lie 40 kJ mol⁻¹ below the reactants, since ΔH is negative. 2. The peak lies 75 kJ mol⁻¹ above the reactants. 3. So from the products the climb is \(75 + 40 = 115\ \mathrm{kJ\,mol^{-1}}\). 4. With the formula: \(E_{a,\text{reverse}} = 75 - (-40) = 115\ \mathrm{kJ\,mol^{-1}}\). 5. Check: for an exothermic reaction the reverse barrier must be the larger one, and 115 is larger than 75. The reverse, endothermic reaction is therefore much slower at the same temperature.
Temperature and the energetic fraction
At any temperature, molecules have a spread of kinetic energies, and only those in the high-energy tail can get over the barrier. The fraction of collisions with energy of at least \(E_a\) is about
with \(E_a\) in J mol⁻¹, R = 8.314 J mol⁻¹ K⁻¹ and T in kelvin. Raising T makes the exponent less negative, so f grows steeply. Heating also makes collisions more frequent, but only slightly: collision frequency rises with \(\sqrt{T}\), so 298 K to 308 K adds under 2%. The growing energetic fraction is what really speeds the reaction.
Worked example: where the 10-degree rule comes from
Take \(E_a = 50.0\ \mathrm{kJ\,mol^{-1}} = 5.00 \times 10^4\ \mathrm{J\,mol^{-1}}\). Compare the energetic fraction at 298 K and 308 K. 1. At 298 K: \(f = e^{-50\,000/(8.314 \times 298)} = 1.72 \times 10^{-9}\). 2. At 308 K: \(f = e^{-50\,000/(8.314 \times 308)} = 3.31 \times 10^{-9}\). 3. Ratio: \(3.31 \div 1.72 = 1.93\), almost exactly a doubling. 4. Interpret: fewer than 2 in a billion collisions are energetic enough, yet a 10 K rise nearly doubles that number. 5. Check: a reaction with a larger \(E_a\) would give a ratio above 2, which is why the rule is only approximate.
The Arrhenius equation
Svante Arrhenius combined these ideas into
The pre-exponential factor A covers how often collisions happen and the fraction with a suitable orientation; \(e^{-E_a/RT}\) is the energetic fraction. Taking logarithms gives a straight line: \(\ln k = \ln A - \frac{E_a}{R}\cdot\frac{1}{T}\), so a plot of ln k against 1/T has slope \(-E_a/R\). With rate constants at just two temperatures, subtracting gives the two-point form:
Worked example: activation energy from two rate constants
A first-order reaction has \(k = 3.5 \times 10^{-4}\ \mathrm{s^{-1}}\) at 25.0 °C and \(2.6 \times 10^{-3}\ \mathrm{s^{-1}}\) at 50.0 °C. Find \(E_a\). 1. Kelvin: \(T_1 = 298.15\) K, \(T_2 = 323.15\) K. 2. \(\ln\frac{2.6 \times 10^{-3}}{3.5 \times 10^{-4}} = \ln 7.43 = 2.005\). 3. \(\frac{1}{298.15} - \frac{1}{323.15} = 2.595 \times 10^{-4}\ \mathrm{K^{-1}}\). 4. \(E_a = \frac{8.314 \times 2.005}{2.595 \times 10^{-4}} = 6.4 \times 10^4\ \mathrm{J\,mol^{-1}}\), or 64 kJ mol⁻¹, to two significant figures like the data. 5. Check: the rate rose about 7.4 times over 25 K, a bit more than the 2.5 doublings (about 5.7 times) the rough rule predicts, consistent with an \(E_a\) above 50 kJ mol⁻¹.
Common mistakes to avoid
First, using Celsius temperatures in the Arrhenius equation; T must be in kelvin. Second, mixing kJ and J: with R = 8.314 J mol⁻¹ K⁻¹, \(E_a\) must be in J mol⁻¹. Third, flipping the order of \(\frac{1}{T_1} - \frac{1}{T_2}\) relative to \(\frac{k_2}{k_1}\), which gives a negative activation energy. Fourth, thinking heat speeds reactions mainly by making collisions more frequent. Fifth, confusing ΔH with \(E_a\): a very exothermic reaction can still have a high barrier and be slow. Sixth, forgetting orientation: energy alone is not enough.
Key takeaways
A reaction needs collisions with at least the activation energy and a suitable orientation. On an energy diagram, the peak is the transition state, Ea is the climb from reactants, and the reverse barrier equals Ea − ΔH. The fraction of energetic collisions, e^(−Ea/RT), rises steeply with temperature, which matters far more than the small rise in collision frequency. The Arrhenius equation, k = A e^(−Ea/RT), gives a straight line of ln k against 1/T with slope −Ea/R; use kelvin, J mol⁻¹ and R = 8.314.
Flashcards
Flashcard
Particles react only when they collide with enough energy and a suitable orientation
Test your understanding
Question 1 of 5
According to collision theory, which of these is NOT required for a collision to lead to reaction?
Question 2 of 5
A reaction has Ea = 120 kJ mol⁻¹ and ΔH = +30 kJ mol⁻¹. What is the activation energy of the reverse reaction?
Question 3 of 5
A reaction has Ea = 60.0 kJ mol⁻¹ and k = 1.0 × 10⁻³ s⁻¹ at 300 K. What is k at 310 K?
Question 4 of 5
A plot of ln k against 1/T for a reaction is a straight line. What does its slope equal?
Question 5 of 5
Why does a 10 K rise in temperature often roughly double a reaction rate?
