Chemistry › Section L · Kinetics › Topic L.4

Integrated rate laws and half-life

A rate law gives the rate at a given concentration, but often the real question is about time: how much will be left after an hour, or how long until 90% has reacted? Integrated rate laws answer that directly, and the half-life gives a quick feel for a reaction's speed.

From rates to concentrations over time

The rate-laws topic linked rate to concentration. As a reaction runs, though, the concentration keeps falling, so the rate keeps changing too. Integrated rate laws, found by applying calculus to the rate law, give the concentration as a function of time instead. There is a separate form for each common order: zero, first and second. They answer practical questions, such as how long a medicine stays effective or how much of a radioactive isotope will remain. These forms assume the rate law is written for the rate at which A is used up, −Δ[A]/Δt, as for a reaction A → products, and that k is known.

First-order reactions

For a reaction with rate = k[A], the integrated rate law is

\ln[\mathrm{A}]_t = \ln[\mathrm{A}]_0 - kt

where \([\mathrm{A}]_0\) is the starting concentration and \([\mathrm{A}]_t\) the concentration at time t. An equivalent form is \([\mathrm{A}]_t = [\mathrm{A}]_0\,e^{-kt}\), an exponential decay. Another useful form is \(\ln\frac{[\mathrm{A}]_0}{[\mathrm{A}]_t} = kt\), which shows that only the fraction remaining matters, not the units of concentration. The natural logarithm, ln, is needed here, not log to base 10. Time and k must use matching units: if k is in s⁻¹, t must be in seconds.

Worked example: a first-order isomerisation

Cyclopropane, a ring of three carbon atoms, rearranges to propene in a first-order reaction. At one temperature, \(k = 6.00 \times 10^{-4}\ \mathrm{s^{-1}}\). Starting from 0.0500 M: 1. After 1800 s, \(kt = 6.00 \times 10^{-4} \times 1800 = 1.08\), so \([\mathrm{A}]_t = 0.0500\,e^{-1.08} = 0.0170\) M. 2. How long until 90% has reacted? Then 10% remains, so \(\frac{[\mathrm{A}]_0}{[\mathrm{A}]_t} = 10\) and \(t = \frac{\ln 10}{k} = \frac{2.303}{6.00 \times 10^{-4}} = 3.84 \times 10^3\) s, about 64 minutes. 3. Check: 0.0170 M is about a third of 0.0500 M, and since \(e^{-1.08} \approx 0.34\), the numbers agree.

Half-life of a first-order reaction

The half-life, \(t_{1/2}\), is the time for a reactant's concentration to fall to half its value. For first order, put \([\mathrm{A}]_t = \frac{1}{2}[\mathrm{A}]_0\) into the integrated law:

t_{1/2} = \frac{\ln 2}{k} = \frac{0.693}{k}

It does not depend on concentration, so every half-life is the same length. For cyclopropane above, \(t_{1/2} = 0.693 \div (6.00 \times 10^{-4}) = 1.16 \times 10^3\) s. After n half-lives the fraction left is \((\frac{1}{2})^n\). Radioactive decay is first order: carbon-14 has a half-life of about 5,730 years. Many drugs are cleared at first order too: with a 6-hour half-life, 25% of a dose remains after 12 hours, and about 3% after five half-lives.

Zero-order and second-order reactions

For a zero-order reaction, rate = k, so the concentration falls by the same amount each second:

[\mathrm{A}]_t = [\mathrm{A}]_0 - kt \qquad t_{1/2} = \frac{[\mathrm{A}]_0}{2k}

Its half-life gets shorter as the concentration falls. For a second-order reaction, rate = k[A]², and

\frac{1}{[\mathrm{A}]_t} = \frac{1}{[\mathrm{A}]_0} + kt \qquad t_{1/2} = \frac{1}{k[\mathrm{A}]_0}

Here the half-life gets longer as the reaction proceeds: each one is twice as long as the one before, because \([\mathrm{A}]_0\) halves each time. Only first order has a constant half-life, which makes the half-life itself a clue to the order.

Worked example: a second-order reaction

A reaction A → products is second order in A with \(k = 0.540\ \mathrm{L\,mol^{-1}\,s^{-1}}\), starting at 0.0500 M. 1. After 60.0 s: \(\frac{1}{[\mathrm{A}]_t} = \frac{1}{0.0500} + 0.540 \times 60.0 = 20.0 + 32.4 = 52.4\ \mathrm{L\,mol^{-1}}\). 2. Invert: \([\mathrm{A}]_t = 1 \div 52.4 = 0.0191\) M. 3. First half-life: \(t_{1/2} = \frac{1}{0.540 \times 0.0500} = 37.0\) s. 4. Check: 60 s is more than one half-life, so [A] should be below 0.0250 M, and 0.0191 M is. The second half-life, from 0.0250 M, would be 74.1 s, twice the first.

Finding the order from a graph

Each integrated law has the shape of a straight line, y = mx + c, for one choice of y. Plot three graphs of the same concentration-time data: [A] against t, ln[A] against t, and 1/[A] against t. Only one will be straight. If [A] against t is straight, the reaction is zero order, with slope −k. If ln[A] against t is straight, it is first order, with slope −k. If 1/[A] against t is straight, it is second order, with slope +k. Without graph paper, check whether equal time steps give equal changes in [A], in ln[A], or in 1/[A].

Worked example: which order fits?

For a reaction A → products, [A] is 0.100 M at 0 s, 0.0625 M at 100 s, 0.0455 M at 200 s and 0.0357 M at 300 s. 1. Changes in [A] per 100 s: −0.0375, −0.0170, −0.0098; not equal, so not zero order. 2. ln[A]: −2.303, −2.773, −3.090, −3.333; changes −0.470, −0.317, −0.243; not equal, so not first order. 3. 1/[A]: 10.0, 16.0, 22.0, 28.0 L mol⁻¹; each step adds 6.0, so 1/[A] against t is a straight line and the reaction is second order. 4. Slope: \(k = \frac{6.0}{100} = 0.060\ \mathrm{L\,mol^{-1}\,s^{-1}}\). 5. Check: \(\frac{1}{0.100} + 0.060 \times 300 = 28.0\), matching the last point.

Common mistakes to avoid

First, using log instead of ln in the first-order law. Second, mixing time units, such as k in s⁻¹ with t in minutes. Third, applying \(t_{1/2} = 0.693/k\) to a zero- or second-order reaction; only first order has a constant half-life. Fourth, forgetting to invert at the end of a second-order calculation, giving 1/[A] as if it were [A]. Fifth, mixing up the slopes: ln[A] and [A] plots fall with slope −k, but the 1/[A] plot rises with slope +k. Sixth, reading the fraction that has reacted as the fraction that remains.

Key takeaways

Integrated rate laws give concentration against time. Zero order: [A] = [A]₀ − kt, a straight line of [A] against t. First order: ln[A] = ln[A]₀ − kt, so ln[A] against t is straight, and the half-life is constant at 0.693/k. Second order: 1/[A] = 1/[A]₀ + kt, so 1/[A] against t is straight, with half-life 1/(k[A]₀). The plot that gives a straight line reveals the order, and its slope gives k. After n first-order half-lives, (½)ⁿ of the reactant remains.

Flashcards

Flashcard

Integrated rate law

Gives concentration as a function of time

One form for each order.

Test your understanding

Question 1 of 5

A first-order reaction has k = 0.0231 min⁻¹. What is its half-life?

Question 2 of 5

A first-order reactant passes through five half-lives. What percentage of it remains?

Question 3 of 5

Concentration-time data for a reaction give a straight line when 1/[A] is plotted against time. What is the order, and what is the slope?

Question 4 of 5

A first-order reaction has [A]₀ = 0.100 M and k = 0.0150 min⁻¹. What is [A] after 60.0 min?

Question 5 of 5

A zero-order reaction has [A]₀ = 0.80 M and k = 0.010 M s⁻¹. What is its first half-life?

← Previous topicNext topic →