Chemistry › Section D · Stoichiometry of reactions › Topic D.5
Titration and gravimetric analysis
How much acid is in a bottle of vinegar, or iron in a supplement tablet? Quantitative analysis answers questions like these, either by measuring exactly how much of a known solution reacts with a sample or by weighing a pure product made from it. Both methods are stoichiometry put to work.
Measuring how much is there
Quantitative analysis finds the amount or concentration of a substance, the analyte, in a sample. Classical methods come in two families. In a titration, you measure how much of a solution of known concentration reacts exactly with the analyte. In a gravimetric analysis, you convert the analyte into a pure solid of known formula and weigh it. Either way, the balanced equation links what you measure to what you want, using the same mole ratios as any other stoichiometry problem. These methods are still used in water testing, food labs and the quality control of medicines, and they also check the instruments that have replaced them for routine work.
How a titration works
A pipette delivers an exact volume of the sample into a flask. The titrant, a standard solution whose concentration is accurately known, is added from a burette, a long graduated tube with a tap, read to about 0.01 mL. The equivalence point is reached when the titrant added exactly matches the analyte in the ratio set by the equation. Its position is usually shown by an indicator, a dye that changes colour near that point: phenolphthalein, for example, is colourless in acid and turns pink in base. The volume at which the colour changes is the end point. A well-chosen indicator makes the end point and the equivalence point practically the same.
The titration calculation
Every titration calculation follows one path:
Volumes must be in litres when concentrations are in mol/L. A shortcut avoids the conversions: molarity is also millimoles per millilitre, so millilitres times molarity gives millimoles directly. For example, 21.50 mL of 0.1000 M titrant contains \(21.50 \times 0.1000 = 2.150\) mmol. Burette and pipette readings usually have four significant figures, so titration results are normally reported to four as well, unless another value is less precise.
Worked example: the acid in vinegar
A 5.00 mL sample of vinegar needs 34.62 mL of 0.1200 M NaOH to reach a phenolphthalein end point. The reaction is
Find the acetic acid concentration. 1. Moles of titrant: \(0.03462\ \text{L} \times 0.1200\ \text{mol/L} = 4.154 \times 10^{-3}\) mol NaOH. 2. Mole ratio 1 : 1, so \(4.154 \times 10^{-3}\) mol of acetic acid. 3. Concentration: \(4.154 \times 10^{-3} \div 0.00500\ \text{L} = 0.831\) M, three significant figures because of the 5.00 mL sample. 4. Interpret: \(0.831 \times 60.05 = 49.9\) g per litre, about 5.0 g per 100 mL, typical of table vinegar.
Worked example: iron in a supplement tablet
Titrations can use redox reactions too. A tablet is dissolved in acid, and its \(\mathrm{Fe^{2+}}\) is titrated with 0.02000 M potassium permanganate:
The end point, 11.64 mL, is when a faint purple colour stays, because purple permanganate is decolourised as long as iron(II) remains, so it acts as its own indicator. 1. Permanganate: \(11.64 \times 0.02000 = 0.2328\) mmol. 2. Mole ratio 5 Fe to 1 Mn: \(0.2328 \times 5 = 1.164\) mmol \(\mathrm{Fe^{2+}}\). 3. Mass: \(1.164 \times 55.85 = 65.0\) mg of iron. 4. Check: forgetting the factor of 5 would have given 13.0 mg, far below the label.
Gravimetric analysis
In a gravimetric analysis, the analyte is separated by changing its physical state, then weighed. The simplest case is moisture content: weigh a sample, heat it to drive off the water, and weigh again. More often, the analyte is precipitated. A reagent is added in excess so that all of the analyte forms an insoluble solid, which is then filtered, washed, dried or heated to constant mass, and weighed. For this to work, the precipitate must be very insoluble, so none stays in solution, and of exactly known composition, so its mass converts reliably to moles. Barium sulfate and silver chloride are classic choices.
Worked example: sulfate in a fertiliser
A 0.8000 g sample of fertiliser whose only sulfate is ammonium sulfate, \(\mathrm{(NH_4)_2SO_4}\), goes into water, and excess barium chloride is added. The precipitate,
dries to 1.215 g. What percentage of the sample is ammonium sulfate? 1. Moles of precipitate: \(1.215 \div 233.39 = 5.206 \times 10^{-3}\) mol \(\mathrm{BaSO_4}\). 2. Each formula unit of ammonium sulfate supplies one sulfate ion, so the ratio is 1 : 1. 3. Mass: \(5.206 \times 10^{-3} \times 132.14 = 0.6879\) g. 4. Mass percent: \(0.6879 \div 0.8000 \times 100\% = 85.99\%\). 5. Check: the answer is below 100 percent, as it must be for a sample that also contains other ingredients.
Combustion analysis
Combustion analysis is a gravimetric method for compounds containing carbon and hydrogen. A weighed sample is burned completely in a stream of oxygen. All its carbon leaves as carbon dioxide and all its hydrogen as water, and each gas is caught in its own absorber tube, weighed before and after. The mass gains give the masses of \(\mathrm{CO_2}\) and \(\mathrm{H_2O}\). Each mole of \(\mathrm{CO_2}\) holds one mole of carbon, and each mole of water holds two moles of hydrogen. Oxygen in the sample cannot be found this way, since oxygen gas is also supplied, so its mass is found by difference. The moles of each element then give the empirical formula.
Worked example: finding a formula by combustion
Burning 0.2000 g of a compound of carbon, hydrogen and oxygen gives 0.3821 g of \(\mathrm{CO_2}\) and 0.2347 g of \(\mathrm{H_2O}\). 1. Carbon: \(0.3821 \div 44.01 = 8.682 \times 10^{-3}\) mol C, or \(8.682 \times 10^{-3} \times 12.01 = 0.1043\) g. 2. Hydrogen: \(0.2347 \div 18.02 \times 2 = 0.02605\) mol H, or 0.02626 g. 3. Oxygen by difference: \(0.2000 - 0.1043 - 0.02626 = 0.0694\) g, or \(0.0694 \div 16.00 = 4.34 \times 10^{-3}\) mol. 4. Divide by the smallest: C 2.00, H 6.00, O 1.00. 5. The empirical formula is \(\mathrm{C_2H_6O}\), the formula of ethanol. Check: the whole-number ratio came out almost exactly, which suggests the data are consistent.
Common mistakes to avoid
First, using millilitres in \(n = cV\) when the concentration is in mol/L; use litres, or work in millimoles throughout. Second, ignoring the mole ratio: sulfuric acid needs two NaOH per molecule, and iron(II) reacts five to one with permanganate. Third, dividing by the titrant volume instead of the sample volume when finding the analyte's concentration. Fourth, taking the mass of the precipitate as the mass of the analyte. Fifth, forgetting that each water molecule carries two hydrogen atoms in combustion analysis. Sixth, confusing the end point, which is observed, with the equivalence point, which is calculated.
Key takeaways
Quantitative analysis measures how much analyte a sample contains. In a titration, a standard solution from a burette reacts with the sample; at the equivalence point the amounts match the equation, and an indicator signals the end point. Moles of titrant, then the mole ratio, then division by the sample volume give the concentration. In gravimetric analysis, the analyte becomes a pure, weighable solid, often a precipitate such as barium sulfate. Combustion analysis weighs the carbon dioxide and water from a burned sample, finds oxygen by difference, and leads to the empirical formula.
Flashcards
Flashcard
The substance whose amount or concentration is being measured
Test your understanding
Question 1 of 5
A 20.00 mL sample of HCl needs 15.00 mL of 0.1000 M NaOH to reach the end point (HCl + NaOH → NaCl + H₂O). What is the HCl concentration?
Question 2 of 5
A 25.00 mL sample of H₂SO₄ is neutralised by 30.00 mL of 0.2000 M NaOH (H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O). What is the H₂SO₄ concentration?
Question 3 of 5
What is the difference between the equivalence point and the end point of a titration?
Question 4 of 5
A 0.5000 g sample is treated with excess Ag⁺, giving 0.7166 g of AgCl (143.32 g/mol). What is the mass percent of chloride in the sample? (Cl: 35.45 g/mol)
Question 5 of 5
Combustion of a hydrocarbon gives 0.880 g of CO₂ and 0.450 g of H₂O. What is its empirical formula?
