Chemistry › Section P · Thermodynamics › Topic P.2

Entropy

Spontaneous changes tend to spread matter and energy out. Entropy turns that loose idea into a quantity you can calculate, either from heat and temperature or by counting the ways a system's particles can be arranged.

From spreading out to a number

The previous topic showed that a gas expanding into an empty flask is spontaneous even though its energy does not change. What changes is how spread out the matter is. To make predictions you need a number for that spreading, one that can be measured and tabulated like enthalpy. That number is entropy, symbol S. Entropy is often described as disorder, which is a useful first picture, but the precise meanings are the two in this topic: one based on heat flow, from the nineteenth-century study of steam engines, and one based on counting molecular arrangements.

Entropy from heat: the Clausius definition

In 1865 Rudolf Clausius, building on Sadi Carnot's work on engines, defined the entropy change of a system as the heat it absorbs along a reversible path divided by the kelvin temperature:

\Delta S = \frac{q_{\text{rev}}}{T}

A reversible process is an idealised one that proceeds so gently that the system stays at equilibrium throughout, and an infinitesimal change in conditions could send it back the other way. Real processes are never quite reversible, but that does not matter: entropy is a state function, so ΔS depends only on the start and end states, and you may calculate it along an imagined reversible path. Its unit is J K⁻¹, or J mol⁻¹ K⁻¹ per mole.

Worked example: melting and boiling water

Find the entropy change when 1 mol of ice melts at 0 °C, and when 1 mol of water boils at 100 °C, at 1 atm. Use ΔH_fus = 6.01 kJ mol⁻¹ and ΔH_vap = 40.7 kJ mol⁻¹. 1. At its normal melting or boiling point a phase change is reversible, and at constant pressure the heat absorbed is ΔH, so \(\Delta S = \frac{\Delta H}{T}\). 2. Convert kJ to J and °C to K. 3. Melting: \(\Delta S = \frac{6010}{273.15} = +22.0\) J mol⁻¹ K⁻¹. 4. Boiling: \(\Delta S = \frac{40{,}700}{373.15} = +109\) J mol⁻¹ K⁻¹. 5. Check: both are positive, as heat is absorbed, and boiling is about five times larger, because a gas is far more spread out than a liquid.

Entropy from counting: microstates

Ludwig Boltzmann linked entropy to the molecular picture. A microstate is one complete specification of where every particle is and how the energy is shared among them. Any system you observe could be in any one of an enormous number, W, of microstates that all look the same from outside. Boltzmann's equation is

S = k \ln W

where k is the Boltzmann constant, \(k = \frac{R}{N_A} = 1.381 \times 10^{-23}\) J K⁻¹. More available microstates means higher entropy, and the change for a process is \(\Delta S = k \ln \frac{W_{\text{final}}}{W_{\text{initial}}}\). When the final state has more microstates, ΔS is positive.

Worked example: molecules in two halves

A box holds 6 gas molecules, each equally likely to be in the left or right half. 1. Each molecule has 2 choices, so the number of microstates is \(2^6 = 64\). 2. All six on the left is just 1 microstate, so its probability is \(\frac{1}{64} \approx 0.016\). 3. Three on each side can happen in \(\binom{6}{3} = 20\) ways, a probability of \(\frac{20}{64} = 0.31\), the most likely split. 4. For 100 molecules, all on the left has probability \(2^{-100} \approx 7.9 \times 10^{-31}\). 5. A real sample has about \(10^{23}\) molecules, so gas never gathers in one half by itself: the evenly spread state is overwhelmingly the most probable, which is why expansion is spontaneous.

Worked example: doubling a gas's volume

Calculate ΔS when 1.00 mol of ideal gas expands into a vacuum to twice its volume. 1. Doubling the volume doubles the positions available to each molecule, so for N molecules \(\frac{W_f}{W_i} = 2^N\). 2. Apply Boltzmann: \(\Delta S = k \ln 2^N = Nk \ln 2\). 3. For one mole, \(N k = N_A k = R\), so \(\Delta S = R \ln 2 = 8.314 \times 0.693 = +5.76\) J K⁻¹. 4. Check: this matches the heat-based method, which uses an imagined reversible expansion between the same two states, because entropy is a state function. The expansion absorbs no heat, yet its entropy rises.

Predicting the sign of ΔS: phase and temperature

Particles in a solid vibrate about fixed positions; in a liquid they can slide past one another; in a gas they roam a volume roughly a thousand times larger. Each step allows vastly more microstates, so for any substance \(S_{\text{gas}} > S_{\text{liquid}} > S_{\text{solid}}\). Melting, boiling and sublimation have ΔS > 0; freezing, condensation and deposition have ΔS < 0. Warming a substance also raises its entropy, because the particles' energies spread over a wider range. In reactions, gases dominate: a reaction that increases the moles of gas almost always has ΔS > 0, and one that decreases them has ΔS < 0.

Predicting the sign of ΔS: particles and mixing

Structure matters too. At the same temperature, heavier atoms have higher entropy than lighter ones in the same phase, so argon gas has more entropy than helium gas. Molecules with more atoms can vibrate and rotate in more ways, so ethane, \(\mathrm{C_2H_6}\), has more entropy than methane, \(\mathrm{CH_4}\). Mixing different substances increases entropy, because the particles can be arranged in more ways. Dissolving a solid in a liquid usually raises entropy as particles leave the crystal, but small, highly charged ions hold water molecules tightly around them, and for some salts this ordering wins, so judge such cases with data.

Common mistakes to avoid

First, using degrees Celsius in \(\Delta S = \frac{q_{\text{rev}}}{T}\); temperature must be in kelvin. Second, mixing units: ΔH in kJ divided by T gives kJ K⁻¹, while entropy tables use J K⁻¹. Third, applying \(\Delta S = \frac{\Delta H}{T}\) to a phase change away from its equilibrium temperature, where it is not reversible. Fourth, counting moles of all species instead of moles of gas when judging the sign of ΔS for a reaction. Fifth, treating a positive ΔS for the system as proof that a process is spontaneous; the surroundings count too, as the next topic shows.

Key takeaways

Entropy, S, measures how widely matter and energy are dispersed. Clausius defined \(\Delta S = q_{\text{rev}}/T\), in J K⁻¹; for a phase change at its normal transition temperature, ΔS = ΔH/T. Boltzmann's \(S = k \ln W\) ties entropy to the number of microstates, and states with more microstates are more probable. Entropy is a state function. It increases from solid to liquid to gas, with temperature, with more moles of gas, with heavier or more complex particles, and usually with mixing and dissolving.

Flashcards

Flashcard

Entropy, S

A measure of how widely a system's matter and energy are dispersed

Often pictured as disorder.

Test your understanding

Question 1 of 5

A substance melts at 27.0 °C with ΔH_fus = 12.0 kJ mol⁻¹. What is its entropy of fusion?

Question 2 of 5

Five gas molecules move freely in a box. What is the probability that, at a given instant, all five are in the left half?

Question 3 of 5

Which process has a negative entropy change for the system?

Question 4 of 5

Which sample has the highest molar entropy?

Question 5 of 5

If the number of microstates available to a system doubles, what is its entropy change?

← Previous topicNext topic →