Chemistry › Section I · Gases › Topic I.3
Gas stoichiometry and partial pressures
The ideal gas law turns a measured volume of gas into moles, and moles are what balanced equations count. This topic uses that bridge to find gas densities and molar masses, to handle mixtures of gases, and to calculate how much gas a reaction makes or needs.
Gases join the stoichiometry road map
For solids you reach moles through mass, and for solutions through molarity and volume. For a gas, the ideal gas law gives the third route:
Measure a gas's pressure, volume and temperature and you know how many moles it contains, without weighing it. That matters because gases are awkward to weigh but easy to collect and measure. Once you have moles, the mole ratios of a balanced equation work exactly as they did in the reaction stoichiometry topic, and the same equation run backwards converts the moles of a gaseous product into the volume it will fill.
Density and molar mass of a gas
Substituting \(n = \frac{m}{M}\) into the ideal gas law and rearranging gives the density of a gas, \(d = \frac{m}{V}\):
Gas densities are small, a few grams per litre, so they are quoted in g/L. At a given temperature and pressure, density is proportional to molar mass. This is why carbon dioxide, with \(M = 44.01\) g/mol, collects in low-lying cellars and pits, while helium balloons rise in air, whose average molar mass is about 29 g/mol. Rearranged as \(M = \frac{dRT}{P}\), the same equation finds an unknown gas's molar mass from its measured density: a gas of density 2.62 g/L at 25 °C and 1.00 atm has \(M = 64.1\) g/mol, matching sulfur dioxide, \(\mathrm{SO_2}\).
Worked example: the density of carbon dioxide
Find the density of \(\mathrm{CO_2}\) at 25 °C and 1.00 atm. 1. Data: \(M = 44.01\) g/mol, \(T = 298.15\) K, \(P = 1.00\) atm, and \(R = 0.08206\ \mathrm{L\,atm\,mol^{-1}\,K^{-1}}\). 2. Apply \(d = \frac{PM}{RT}\): \(d = \frac{1.00 \times 44.01}{0.08206 \times 298.15} = 1.80\) g/L. 3. Check another way: at 25 °C and 1 atm one mole fills 24.5 L, and \(44.01\ \mathrm{g} \div 24.5\ \mathrm{L} = 1.80\) g/L. 4. Compare: air at the same conditions is about \(29 \div 24.5 = 1.2\) g/L, so carbon dioxide is about 1.5 times denser and sinks.
Dalton's law of partial pressures
In a mixture of gases that do not react, each gas behaves as if it were alone in the container. The pressure it would exert alone is its partial pressure, and Dalton's law states that the total pressure is the sum of the partial pressures:
Because each partial pressure is proportional to that gas's moles at fixed \(V\) and \(T\), it equals the gas's mole fraction times the total pressure:
Mole fraction, as defined in the concentration topic, has no unit, and the mole fractions in a mixture add up to 1.
Partial pressures you breathe
Dry air is about 20.95% oxygen by moles, so at sea level, where the total pressure is about 101 kPa, the partial pressure of oxygen is about 21 kPa, or 0.21 atm. Your lungs respond to that partial pressure, not to the percentage. On the summit of Mount Everest the air is still about 21% oxygen, but the total pressure is only about a third of sea level, so each breath delivers about a third as much oxygen. Divers face the opposite problem. A nitrox mixture with \(x_{\mathrm{O_2}} = 0.32\) breathed at a depth where the total pressure is 4.0 atm gives \(P_{\mathrm{O_2}} = 0.32 \times 4.0 = 1.3\) atm, close to the limit at which oxygen itself becomes toxic.
Collecting a gas over water
A convenient way to collect a gas made in a reaction is to bubble it into an upturned bottle filled with water, letting the gas push the water out. The gas collected is never pure: it is mixed with water vapour, which evaporates from the water surface until it reaches the vapour pressure of water at that temperature. Raising or lowering the bottle until the water levels inside and outside match makes the total pressure inside equal atmospheric pressure. Dalton's law then gives the pressure of the dry gas:
Water's vapour pressure depends only on temperature: about 19.8 torr at 22 °C and 23.8 torr at 25 °C.
Worked example: hydrogen collected over water
Magnesium reacts with excess hydrochloric acid,
and 0.245 L of gas is collected over water at 22 °C and a total pressure of 752 torr. What mass of magnesium reacted? 1. Dry hydrogen: \(P_{\mathrm{H_2}} = 752 - 19.8 = 732.2\) torr, which is \(732.2 \div 760 = 0.9634\) atm. 2. Moles: \(n = \frac{PV}{RT} = \frac{0.9634 \times 0.245}{0.08206 \times 295.15} = 9.75 \times 10^{-3}\) mol \(\mathrm{H_2}\). 3. Mole ratio 1 Mg : 1 \(\mathrm{H_2}\), so \(9.75 \times 10^{-3}\) mol Mg. 4. Mass: \(9.75 \times 10^{-3} \times 24.31 = 0.237\) g. 5. Check: about a quarter of a litre is about 0.01 mol of gas, and 0.01 mol of Mg is about 0.24 g.
Volumes of reacting gases
Avogadro's law gives a shortcut when every substance involved is a gas at the same temperature and pressure. Equal volumes then contain equal numbers of molecules, so gas volumes react in the same ratio as the coefficients in the balanced equation. In the synthesis of ammonia, \(\mathrm{N_2(g) + 3H_2(g) \rightarrow 2NH_3(g)}\), 1.0 L of nitrogen reacts with 3.0 L of hydrogen to give 2.0 L of ammonia, all measured under the same conditions. No molar mass or gas constant is needed. The shortcut fails for any substance that is not a gas, such as water that condenses to a liquid, and when the conditions differ.
Worked example: inflating an airbag
Some airbag inflators have used the rapid decomposition of sodium azide: \(\mathrm{2NaN_3(s) \rightarrow 2Na(s) + 3N_2(g)}\). What volume of nitrogen at 25 °C and 1.00 atm does 65.0 g of \(\mathrm{NaN_3}\) produce? 1. Molar mass of \(\mathrm{NaN_3}\): \(22.99 + 3(14.01) = 65.02\) g/mol, so \(n = 65.0 \div 65.02 = 1.000\) mol. 2. Mole ratio 3 \(\mathrm{N_2}\) : 2 \(\mathrm{NaN_3}\): \(1.000 \times \frac{3}{2} = 1.500\) mol \(\mathrm{N_2}\). 3. Volume: \(V = \frac{nRT}{P} = \frac{1.500 \times 0.08206 \times 298.15}{1.00} = 36.7\) L. 4. Check: 1.5 mol at 24.5 L each is 36.7 L, the size of a small airbag.
Common mistakes to avoid
First, forgetting to subtract water's vapour pressure from the total when a gas is collected over water. Second, multiplying the total pressure by a mass percentage instead of the mole fraction; partial pressures follow moles, not grams. Third, using a coefficient ratio of gas volumes for a substance that is not a gas. Fourth, using 22.4 L per mole at temperatures and pressures other than 0 °C and 1 atm; the ideal gas law works under any conditions. Fifth, mixing pressure units, such as a vapour pressure in torr with a total in kPa.
Key takeaways
The ideal gas law, n = PV/RT, links a gas's measured volume to moles, so gases fit into reaction stoichiometry like any other substance. Gas density is d = PM/RT, and an unknown molar mass follows from M = dRT/P. Dalton's law: total pressure is the sum of partial pressures, and each partial pressure is P_A = x_A P_total. A gas collected over water is mixed with water vapour, so subtract the vapour pressure. At the same temperature and pressure, gas volumes react in the ratio of their coefficients.
Flashcards
Flashcard
Moles of gas from its pressure, volume and temperature
Test your understanding
Question 1 of 5
What is the density of oxygen gas, O₂ (32.00 g/mol), at 0 °C and 1 atm?
Question 2 of 5
A mixture contains 0.600 mol N₂, 0.200 mol O₂ and 0.200 mol He at a total pressure of 2.50 atm. What is the partial pressure of O₂?
Question 3 of 5
A gas is collected over water at 25 °C, where water's vapour pressure is 23.8 torr. The total pressure is 755 torr. What is the pressure of the dry gas?
Question 4 of 5
Methane burns as CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l). What volume of O₂ is needed to burn 4.0 L of CH₄, both measured at the same temperature and pressure?
Question 5 of 5
An unknown gas has a density of 1.96 g/L at 0 °C and 1 atm. What is its molar mass?
