Chemistry › Section I · Gases › Topic I.2

The gas laws and the ideal gas law

Squeeze a gas, heat it or add more of it, and its pressure, volume and temperature change in predictable ways. Four simple laws describe those changes, and they combine into one equation, PV = nRT, that works for almost any gas under everyday conditions.

Four variables describe a gas

A sample of gas is fully described by four quantities: its pressure \(P\), volume \(V\), absolute temperature \(T\) and amount \(n\) in moles. Change one and at least one other must respond. Each of the classic gas laws holds two of the four fixed and asks how the other two are related. Two rules apply throughout. Temperature must be in kelvin, \(T(\mathrm{K}) = T(^\circ\mathrm{C}) + 273.15\), because the laws are proportions that start from absolute zero. And pressure must be the absolute pressure, not a gauge reading, as the previous topic explained.

Pressure and temperature: Amontons's law

Heat a sealed, rigid container of gas and its pressure rises. At constant volume and amount, pressure is directly proportional to absolute temperature:

\frac{P_1}{T_1} = \frac{P_2}{T_2}

This is Amontons's law, often called Gay-Lussac's law. Doubling the kelvin temperature doubles the pressure. It is why aerosol cans warn you never to heat them. Notice that doubling the temperature from 20 °C to 40 °C does not double the pressure, because 293 K to 313 K is a rise of only about 7%.

Worked example: a warm tyre

A car tyre holds air at an absolute pressure of 330 kPa at 15 °C. After a motorway drive the air inside is at 45 °C. Assuming the volume and amount of air stay constant, what is the new pressure? 1. Convert temperatures: \(T_1 = 288.15\) K and \(T_2 = 318.15\) K. 2. Rearrange Amontons's law: \(P_2 = P_1 \times \frac{T_2}{T_1}\). 3. Substitute: \(P_2 = 330\ \mathrm{kPa} \times \frac{318.15}{288.15} = 364\) kPa. 4. Check: the kelvin temperature rose by about 10%, and so did the pressure, from 330 to 364 kPa. The pressure rises, as a hotter gas should.

Volume and temperature: Charles's law

At constant pressure and amount, the volume of a gas is directly proportional to its absolute temperature:

\frac{V_1}{T_1} = \frac{V_2}{T_2}

A balloon taken from a warm room into a freezer visibly shrinks, then swells again as it warms. When volume is plotted against Celsius temperature for any gas, the straight lines all extend back to meet the axis at \(-273.15\) °C. That point is absolute zero, 0 K, the zero of the kelvin scale. No real gas reaches zero volume, because every gas condenses to a liquid first, but the extrapolation points to an absolute zero, the lowest possible temperature.

Pressure and volume: Boyle's law

At constant temperature and amount, pressure and volume are inversely proportional:

P_1V_1 = P_2V_2

Halve the volume and the pressure doubles. Press the plunger of a sealed syringe and you feel the trapped air pushing back harder. A graph of \(P\) against \(V\) is a curve, but a graph of \(P\) against \(\frac{1}{V}\) is a straight line through the origin, which is the usual way to test the law with data. Breathing relies on it: as your lungs expand, the pressure inside dips below atmospheric and air flows in.

Amount and volume: Avogadro's law

At constant temperature and pressure, the volume of a gas is directly proportional to the number of moles:

\frac{V_1}{n_1} = \frac{V_2}{n_2}

Blowing more breath into a balloon makes it bigger. The striking consequence is that equal volumes of different gases, at the same temperature and pressure, contain equal numbers of molecules. A litre of hydrogen and a litre of carbon dioxide under the same conditions hold the same number of molecules, even though the carbon dioxide has about 22 times the mass.

The ideal gas law

The four laws combine into one equation:

PV = nRT

The gas constant \(R\) takes a value that depends on the units chosen: \(R = 0.08206\ \mathrm{L\,atm\,mol^{-1}\,K^{-1}}\), or \(R = 8.314\ \mathrm{J\,mol^{-1}\,K^{-1}}\), which is the same as \(8.314\ \mathrm{kPa\,L\,mol^{-1}\,K^{-1}}\) because \(1\ \mathrm{kPa\,L} = 1\) J. Pick the value whose units match your data, and the units cancel to leave the one you want. A gas that obeys this equation exactly is called an ideal gas. Real gases follow it closely at ordinary temperatures and pressures; the final topic of this section shows where it fails.

Worked example: oxygen in a cylinder

A hospital oxygen cylinder has an internal volume of 6.80 L and holds \(\mathrm{O_2}\) at \(1.50 \times 10^4\) kPa and 20 °C. What mass of oxygen does it hold? 1. Choose \(R = 8.314\ \mathrm{kPa\,L\,mol^{-1}\,K^{-1}}\) to match kPa and L, and convert \(T = 293.15\) K. 2. Rearrange: \(n = \frac{PV}{RT}\). 3. Substitute: \(n = \frac{(1.50 \times 10^4)(6.80)}{(8.314)(293.15)} = 41.85\) mol. 4. Mass: \(m = nM = 41.85 \times 32.00 = 1.34 \times 10^3\) g, or 1.34 kg. 5. Check: the pressure is about 148 atm, so at 1 atm this gas would fill about \(148 \times 6.80 \approx 1000\) L, and at roughly 24 L per mole near room temperature that is about 42 mol. At such high pressure the ideal value is an estimate.

The combined gas law and molar volume

When a fixed amount of gas changes conditions, \(n\) and \(R\) cancel from \(PV = nRT\), leaving the combined gas law:

\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}

Hold any one variable constant and it reduces to Boyle's, Charles's or Amontons's law. The ideal gas law also gives the molar volume, the volume of 1 mol of ideal gas. At 0 °C and 1 atm it is 22.4 L; at IUPAC standard temperature and pressure, 273.15 K and 1 bar, it is 22.7 L. Many books, including some current ones, still call 0 °C and 1 atm STP, so always check which definition a source uses. At 25 °C and 1 atm it is 24.5 L.

Worked example: a rising balloon

A balloon holds 2.50 L of helium at 1.00 atm and 25 °C. It rises to where the pressure is 0.500 atm and the temperature is −20 °C. Assuming no gas escapes and the balloon stretches freely, what is its new volume? 1. Kelvin temperatures: \(T_1 = 298.15\) K and \(T_2 = 253.15\) K. 2. Rearrange: \(V_2 = V_1 \times \frac{P_1}{P_2} \times \frac{T_2}{T_1}\). 3. Substitute: \(V_2 = 2.50 \times \frac{1.00}{0.500} \times \frac{253.15}{298.15} = 4.25\) L. 4. Check each factor: halving the pressure alone would double the volume to 5.00 L, and cooling shrinks it a little, so 4.25 L is sensible.

Common mistakes to avoid

First, using Celsius temperatures: 40 °C is not twice as hot as 20 °C in any gas law. Second, choosing a value of \(R\) whose units do not match the data, such as 8.314 with atm and litres. Third, flipping a ratio: when gas is compressed at constant temperature its volume must fall, so check the direction of every change. Fourth, using 22.4 L for a gas that is not at 0 °C and 1 atm, or mixing it up with 22.7 L at 1 bar. Fifth, using gauge pressure instead of absolute pressure.

Key takeaways

A gas is described by P, V, T and n, with T always in kelvin. Amontons's law: P/T is constant at fixed V and n. Charles's law: V/T is constant at fixed P and n, and points to absolute zero. Boyle's law: PV is constant at fixed T and n. Avogadro's law: V/n is constant, so equal volumes of gases at the same T and P hold equal numbers of molecules. Together they give PV = nRT, with R = 0.08206 L atm mol⁻¹ K⁻¹ or 8.314 J mol⁻¹ K⁻¹. For a fixed amount, P₁V₁/T₁ = P₂V₂/T₂. One mole occupies 22.4 L at 0 °C and 1 atm, or 22.7 L at 0 °C and 1 bar.

Flashcards

Flashcard

Four gas variables

Pressure P, volume V, absolute temperature T, amount n

Each gas law fixes two of them.

Test your understanding

Question 1 of 5

A gas occupies 6.00 L at 1.20 atm. At constant temperature, what volume does it occupy at 3.60 atm?

Question 2 of 5

A 2.00 L balloon at 20 °C is warmed to 40 °C at constant pressure. What is its new volume?

Question 3 of 5

How many moles of gas are in a 5.00 L flask at 2.00 atm and 27 °C?

Question 4 of 5

What volume does 0.250 mol of an ideal gas occupy at 0 °C and 1 atm?

Question 5 of 5

Two 1.00 L flasks at the same temperature and pressure contain hydrogen, H₂, and carbon dioxide, CO₂. Which statement is true?

← Previous topicNext topic →