Electrical Engineering › Section J · Series, parallel, and series-parallel ac circuits › Topic J.3

Admittance and parallel ac networks

Almost every load in a building sits in parallel across the supply. Admittance, the reciprocal of impedance, turns parallel ac networks into simple sums, just as conductance did for parallel resistors in dc.

Why admittance

In parallel dc circuits you added conductances, \(G = 1/R\), and took the reciprocal at the end. Parallel ac networks work the same way with admittance, the reciprocal of impedance:

Y = \frac{1}{Z} = \frac{\mathbf{I}}{\mathbf{E}}

Its unit is the siemens, S. Admittance measures how readily a network admits current: the larger Y is, the more current flows for the same voltage, since \(\mathbf{I} = Y\mathbf{E}\). Like impedance, admittance is a complex number but not a phasor, because it stands for no sinusoid. As before, bold letters are phasors and plain letters their rms magnitudes.

Conductance and susceptance

In rectangular form \(Y = G + jB\), where G is the conductance and B the susceptance, both in siemens. A resistor has \(Y_R = G\angle 0^\circ\) with \(G = 1/R\). An inductor has

Y_L = \frac{1}{jX_L} = -jB_L, \quad B_L = \frac{1}{X_L}

and a capacitor has \(Y_C = +jB_C\) with \(B_C = 1/X_C = \omega C\). Taking the reciprocal flips each angle, so on an admittance diagram conductance points right, capacitive susceptance points up and inductive susceptance points down: the reverse of the impedance diagram. A positive total susceptance means a capacitive network.

Admittance of a series branch

A branch often holds a resistor and a reactance in series, \(Z = R + jX\). Its admittance is not \(1/R + 1/(jX)\). Multiply top and bottom by the conjugate instead:

Y = \frac{1}{R + jX} = \frac{R}{R^2 + X^2} - j\frac{X}{R^2 + X^2}

So the branch's conductance is \(R/(R^2 + X^2)\), which equals \(1/R\) only if X is zero. In polar form the step is quicker: invert the magnitude and change the sign of the angle. Either way, the branch behaves like a conductance in parallel with a susceptance, an idea the topic "Equivalent circuits and phase measurement" develops.

Worked example: one branch

Find the admittance of a branch holding a 12 Ω resistor in series with an inductive reactance of 9 Ω. 1. Impedance: \(Z = 12 + j9\,\Omega = 15\angle 36.87^\circ\,\Omega\). 2. Invert in polar form: \(Y = 1/(15\angle 36.87^\circ) = 66.7\angle -36.87^\circ\) mS. 3. Rectangular form: \(Y = 53.3 - j40.0\) mS. 4. Check with the formula: \(R/(R^2 + X^2) = 12/225 = 53.3\) mS and \(X/(R^2 + X^2) = 9/225 = 40.0\) mS. 5. Notice the conductance is 53.3 mS, not \(1/12 = 83.3\) mS: the series reactance changes the conductance as well as the susceptance.

Parallel ac networks

Elements in parallel share the same voltage. Admittances in parallel add, \(Y_T = Y_1 + Y_2 + \cdots + Y_N\), and \(Z_T = 1/Y_T\). For exactly two branches the dc product-over-sum form also works with complex numbers:

Z_T = \frac{Z_1 Z_2}{Z_1 + Z_2}

The source current is \(\mathbf{I}_s = Y_T\mathbf{E}\), each branch current is \(\mathbf{I}_x = Y_x\mathbf{E}\), and Kirchhoff's current law holds as a phasor sum. Power is dissipated only in conductance, so \(P = E^2 G_T = EI_s\cos\theta_T\), and the power factor is \(F_p = G_T/|Y_T|\), with \(G_T\) the real part of \(Y_T\).

The parallel R-L-C network

With R, L and C all across the same source,

Y_T = G + j(B_C - B_L)

If \(B_C > B_L\), the network is capacitive and the source current leads E; if \(B_L > B_C\), it is inductive and the current lags. Because susceptance is the reciprocal of reactance, the element with the smaller reactance carries the larger current and decides the character of a parallel network. That is the reverse of a series circuit, where the larger reactance wins. When \(B_C = B_L\) the reactive currents cancel and the source sees only G, a case studied in "Parallel resonance".

Worked example: a parallel R-L-C load

A 120 V, 60 Hz supply, \(\mathbf{E} = 120\angle 0^\circ\,\text{V}\), feeds a 100 Ω resistor, a 0.5 H inductor and a 22 µF capacitor in parallel. 1. \(X_L = 188.5\,\Omega\) and \(X_C = 120.6\,\Omega\), so \(G = 10.0\), \(B_L = 5.31\) and \(B_C = 8.29\) mS. 2. Total: \(Y_T = 10.0 + j2.99\) mS \(= 10.4\angle 16.6^\circ\) mS, capacitive, and \(Z_T = 95.8\angle -16.6^\circ\,\Omega\). 3. Currents:

\begin{aligned} \mathbf{I}_R &= 1.20\angle 0^\circ\,\text{A} \\ \mathbf{I}_L &= 0.637\angle -90^\circ\,\text{A} \\ \mathbf{I}_C &= 0.995\angle 90^\circ\,\text{A} \\ \mathbf{I}_s &= 1.25\angle 16.6^\circ\,\text{A} \end{aligned}

4. Check: \(1.20 + j(0.995 - 0.637) = 1.20 + j0.358\), which is \(1.25\angle 16.6^\circ\) A. Power is \(E^2G = 144\) W, with \(F_p = 0.958\) leading.

The parallel phasor diagram

In a parallel network the voltage is common, so draw \(\mathbf{E}\) as the reference along the positive real axis. The resistor current lies along it, the capacitor current points 90° ahead and the inductor current 90° behind. The two reactive currents point in opposite directions, so only their difference adds to the resistor current. Placed head to tail, the branch currents end at the tip of the source current \(\mathbf{I}_s\). In the worked example the branch magnitudes add to 2.83 A, yet the source supplies only 1.25 A, because most of the capacitor and inductor currents cancel each other.

The current divider rule

As in dc, a current entering parallel branches divides in proportion to their admittances:

\mathbf{I}_x = \frac{Y_x\,\mathbf{I}}{Y_T}

For two branches this becomes the familiar form with the other branch's impedance on top:

\mathbf{I}_1 = \frac{Z_2\,\mathbf{I}}{Z_1 + Z_2}

The branch with the smaller impedance takes the larger share. Because the arithmetic is complex, the branch currents can each differ in phase from the total, and their magnitudes can add to more than the magnitude of the total.

Worked example: dividing a current

A current \(\mathbf{I} = 2\angle 0^\circ\) A enters a 10 Ω resistor in parallel with an inductive reactance of 20 Ω. Find both branch currents. 1. Sum of impedances: \(Z_1 + Z_2 = 10 + j20 = 22.4\angle 63.4^\circ\,\Omega\). 2. Resistor current: \(\mathbf{I}_R = (20\angle 90^\circ)(2\angle 0^\circ)/(22.4\angle 63.4^\circ) = 1.79\angle 26.6^\circ\) A. 3. Inductor current: \(\mathbf{I}_L = (10\angle 0^\circ)(2\angle 0^\circ)/(22.4\angle 63.4^\circ) = 0.894\angle -63.4^\circ\) A. 4. Check: the two currents are 90° apart, as a resistor and inductor sharing one voltage must be, and \(\sqrt{1.79^2 + 0.894^2} = 2.00\) A.

Common mistakes to avoid

1. Taking \(1/R\) as the conductance of a branch that also contains reactance. 2. Keeping the impedance signs: an inductor's susceptance is \(-jB_L\) and a capacitor's is \(+jB_C\). 3. Adding impedances in parallel, or admittances in series. 4. Expecting the larger reactance to dominate, as in series; in parallel the smaller one does. 5. Adding branch current magnitudes to find the source current. 6. Putting a branch's own impedance on top in the two-branch current divider: the other branch's impedance goes there.

Key takeaways

Admittance \(Y = 1/Z = G + jB\), in siemens, measures how readily a network admits current, with \(\mathbf{I} = Y\mathbf{E}\). A resistor gives G, an inductor \(-jB_L\) and a capacitor \(+jB_C\). A series branch's conductance is \(R/(R^2 + X^2)\), not \(1/R\). Parallel admittances add, Z is \(1/Y_T\), all branches share one voltage and Kirchhoff's current law holds for phasors. Power is \(E^2G_T\) and \(F_p = G_T/|Y_T|\). The current divider sends the larger share through the smaller impedance.

Flashcards

Flashcard

Admittance Y

Y = 1/Z = I/E, in siemens (S)

How readily a network admits current.

Test your understanding

Question 1 of 5

What is the admittance of a branch made of a 3 Ω resistor in series with an inductive reactance of 4 Ω?

Question 2 of 5

A 40 Ω resistor is in parallel with a capacitive reactance of 30 Ω. What is the total impedance?

Question 3 of 5

In a parallel R-L-C network the resistor carries 4 A, the inductor 3 A and the capacitor 5 A. What is the source current?

Question 4 of 5

A current of 6∠0° A divides between a 6 Ω resistor and a capacitive reactance of 8 Ω in parallel. What is the capacitor current?

Question 5 of 5

What is the admittance of an inductor whose reactance is 50 Ω?

← Previous topicNext topic →