Electrical Engineering › Section G · Capacitors › Topic G.1

The electric field

A capacitor stores energy not in its plates but in the electric field between them. Before meeting capacitors, it pays to understand that field: what produces it, how strong it is, how it relates to voltage, and what happens when it gets too strong.

Why fields come before capacitors

Resistors turn electrical energy into heat; capacitors store it. A capacitor is just two conductors separated by an insulator, and when it is charged, an electric field fills the space between them. Every property of a capacitor in the rest of this section, from its capacitance to its voltage rating, comes from that field. This topic builds the idea of a field from the force between charges, connects it to the voltage you already measure with a meter, and ends with the practical limits: breakdown, shielding and electrostatic discharge.

Coulomb's law, revisited

Atoms, current, and voltage introduced Coulomb's law: two point charges \(q_1\) and \(q_2\) a distance \(r\) apart attract or repel with \(F = kq_1q_2/r^2\), where \(k \approx 8.99 \times 10^9\,\text{N m}^2/\text{C}^2\), so doubling \(r\) quarters the force. Charles-Augustin de Coulomb established it with a torsion balance in about 1785. This section needs the constant in another form,

k = \frac{1}{4\pi\varepsilon_0}

where \(\varepsilon_0 \approx 8.85 \times 10^{-12}\,\text{F/m}\) is the permittivity of free space, a number that reappears in every capacitor formula. The force is also a vector acting along the line joining the charges, and that direction is what the idea of a field captures.

The electric field

Instead of asking how two charges act on each other at a distance, we can say that a charge fills the space around it with an electric field, and that any other charge placed there feels a force from the field. The field strength \(E\) at a point is the force per unit charge on a small positive test charge:

E = \frac{F}{q}

Its unit is the newton per coulomb, which equals the volt per metre. The field is a vector: it points the way a positive charge would be pushed. Around a point charge \(Q\), dividing Coulomb's law by \(q\) gives \(E = kQ/r^2\), pointing away from a positive charge and towards a negative one.

Field lines and flux density

Field lines picture the field. They start on positive charges and end on negative ones, their direction at each point is the field direction, they never cross, and they crowd together where the field is strong. The total "amount" of field leaving a charge is measured by the electric flux \(\psi\), defined so that the flux from a charge \(Q\) equals \(Q\), in coulombs; strictly it is the flux of \(D\), below. The flux through each square metre is the electric flux density

D = \frac{\psi}{A}

in coulombs per square metre. In a vacuum \(D = \varepsilon_0 E\). At 30 cm from a 4.0 nC charge, \(D = \frac{4.0 \times 10^{-9}}{4\pi (0.30)^2} = 3.54\,\text{nC/m}^2\).

Worked example: point charges

1. Force: a +2.0 nC charge and a −3.0 nC charge sit 5.0 cm apart.

\begin{aligned} F &= \frac{8.99 \times 10^9 \times 6.0 \times 10^{-18}}{(0.050)^2} \\ &= 2.16 \times 10^{-5}\,\text{N} \end{aligned}

or 21.6 µN, and the charges attract because their signs differ. 2. Field: at 30 cm from a +4.0 nC charge,

E = \frac{8.99 \times 10^9 \times 4.0 \times 10^{-9}}{0.30^2} = 400\,\text{N/C}

pointing away from the charge. 3. Force from the field: a +1.0 nC charge placed there feels \(F = qE = 4.00 \times 10^{-7}\,\text{N}\). 4. Check the inverse square: at 60 cm the field is \(400/4 = 100\,\text{N/C}\). As a cross-check, \(\varepsilon_0 E = 8.85 \times 10^{-12} \times 400 = 3.54\,\text{nC/m}^2\), the flux density found on the previous card.

Field and voltage

Voltage and field are two views of the same thing. Voltage is energy per unit charge; the field is how fast the potential changes with distance, and it points from high potential towards low. Between two large, flat, parallel plates a distance \(d\) apart with a voltage \(V\) between them, the field is uniform, apart from near the edges:

E = \frac{V}{d}

This is why the volt per metre is a natural unit for field strength. Surfaces of equal potential, equipotentials, are at right angles to the field lines; between parallel plates they are flat sheets parallel to the plates.

Worked example: parallel plates

Two parallel plates 0.20 mm apart have 50 V between them. 1. Field: \(E = \frac{50}{0.20 \times 10^{-3}} = 2.5 \times 10^5\,\text{V/m}\), or 250 kV/m, from the + plate towards the − plate. 2. Force on an electron in the gap:

F = eE = 1.60 \times 10^{-19} \times 2.5 \times 10^5 = 4.0 \times 10^{-14}\,\text{N}

towards the + plate because its charge is negative. 3. Safety margin: dry air breaks down at about 3 MV/m, so this air gap would spark over at roughly \(3 \times 10^6 \times 0.20 \times 10^{-3} = 600\,\text{V}\). 4. Check: a field twelve times weaker than breakdown matches 50 V being twelve times less than 600 V.

Gauss's law

Gauss's law, one of Maxwell's equations, states that the flux of \(\mathbf{E}\) out of any closed surface equals the charge enclosed divided by \(\varepsilon_0\):

\oint_S \mathbf{E} \cdot d\mathbf{A} = \frac{Q_{enc}}{\varepsilon_0}

Multiplying by \(\varepsilon_0\) turns this into a statement about \(D\): the flux \(\psi\) leaving any closed surface equals the charge inside, which is why \(\psi = Q\). For a point charge, take a sphere of radius \(r\) around it. The field has the same size everywhere on the sphere and crosses it at right angles, so \(E \times 4\pi r^2 = Q/\varepsilon_0\), which gives \(E = Q/(4\pi\varepsilon_0 r^2)\), Coulomb's result again. For charge spread over large plates, long wires or spheres, symmetry makes Gauss's law the fastest route to the field.

Conductors, shielding and discharge

In a conductor at rest, free charges move until the field inside the metal is zero; any excess charge ends up on the outer surface. A closed metal shell, a Faraday cage, therefore shields its interior from external electric fields, which is why sensitive circuits sit in metal cans and why a car's metal body protects its occupants from a lightning strike. When a field exceeds an insulator's dielectric strength, the insulator breaks down and conducts: sparks and lightning are air breaking down. Small sparks matter too. Electrostatic discharge (ESD) from a person can destroy integrated circuits, so technicians use earthed wrist straps and anti-static bags. Electrostatic forces also do useful work: laser printers and photocopiers place toner with a charged drum, and electrostatic precipitators pull dust out of chimney gases.

Common mistakes to avoid

First, forgetting to square the distance in Coulomb's law or in \(kQ/r^2\). Second, leaving distances in centimetres or millimetres instead of metres, and charges in nanocoulombs instead of coulombs. Third, drawing the field from − to +; it points from positive charge, and high potential, towards negative charge and low potential. Fourth, applying \(E = V/d\) to anything other than a uniform field such as that between parallel plates. Fifth, thinking a conductor's interior field is strong because it is charged; at rest it is zero.

Key takeaways

Coulomb's law: \(F = kq_1q_2/r^2\) with \(k = 1/(4\pi\varepsilon_0) \approx 8.99 \times 10^9\). The electric field is force per unit charge, in N/C or V/m, and for a point charge \(E = kQ/r^2\). Field lines run from positive to negative charge and never cross; flux density \(D = \psi/A\), with \(D = \varepsilon_0 E\) in a vacuum. Between parallel plates the field is uniform, \(E = V/d\). Gauss's law links flux through a closed surface to enclosed charge. Conductors at rest have no internal field, metal enclosures shield, and fields above about 3 MV/m break down air.

Flashcards

Flashcard

Coulomb's law

F = k q₁ q₂ / r²

Met first in Atoms, current, and voltage.

Test your understanding

Question 1 of 5

The electric field 10 cm from a point charge is 8.0 kN/C. What is the field 20 cm from the same charge?

Question 2 of 5

Two large parallel plates 0.50 mm apart have 12 V between them. What is the field strength between them?

Question 3 of 5

What is the electric field strength 10 cm from a point charge of +2.0 µC?

Question 4 of 5

Which statement about electric field lines is correct?

Question 5 of 5

A metal object holds extra charge and is at rest. What is the electric field inside the metal itself?

← Previous topicNext topic →