Physics › Section B · Kinematics in one and two dimensions › Topic B.2
Time, velocity, and speed
Knowing where something ends up is only half the story; you also want to know how quickly it got there. This topic defines elapsed time, velocity and speed, both averaged over a trip and at a single instant, and shows why speed and velocity are not the same thing.
How quickly does position change?
Two cars can make the same 10 km displacement, one in 8 minutes and one in 20. What separates them is the rate at which their positions change, which is what velocity and speed measure. Both divide a quantity from the previous topic by a time. Velocity uses displacement, so it is a vector with a direction. Speed uses distance travelled, so it is a scalar.
Time and elapsed time
Time is measured by counting a process that repeats steadily: the swings of a pendulum, the vibrations of a quartz crystal in a watch, or the caesium-atom frequency that defines the SI second. For motion, what matters is usually the elapsed time, the length of the interval between two events:
If a bus leaves at 8:05 and arrives at 8:41, the elapsed time is 36 minutes. Starting a stopwatch at the beginning of the motion makes \(t_i = 0\), so the elapsed time is just the stopwatch reading \(t\). Elapsed time is never negative.
Average velocity
Average velocity is displacement divided by the elapsed time:
The bar over the \(v\) means average. The SI unit is metres per second, m/s. Because displacement is a vector, so is average velocity, and in one dimension its sign gives its direction: with east positive, \(\bar{v} = -3.0\) m/s means 3.0 m/s westward on average. Average velocity says nothing about what happened along the way. An object could stop, speed up or even turn round during the interval, and only the start and end positions would show in the answer.
Average speed
Average speed is the distance travelled divided by the elapsed time. It is a scalar and can never be negative. Since distance travelled is never less than the magnitude of the displacement, average speed is never less than the size of the average velocity, and it is often more. The two agree only when the object moves in one direction without reversing. For a round trip, the displacement is zero, so the average velocity is zero even though the average speed may be large.
Worked example: a delivery robot
A delivery robot moves along a straight pavement, east positive. At \(t = 2.0\) s it is at \(x = 5.0\) m. It rolls east to \(x = 80.0\) m, realises it has passed the door, and backs up to \(x = 65.0\) m, arriving at \(t = 32.0\) s. 1. Elapsed time: \(\Delta t = 32.0 - 2.0 = 30.0\) s. 2. Displacement: \(\Delta x = 65.0 - 5.0 = +60.0\) m. 3. Average velocity: \(60.0 \div 30.0 = +2.00\) m/s, so 2.00 m/s east. 4. Distance travelled: \(75.0 + 15.0 = 90.0\) m. 5. Average speed: \(90.0 \div 30.0 = 3.00\) m/s. 6. Check: the speed exceeds the size of the velocity, as it must when the robot doubles back.
Instantaneous velocity
Instantaneous velocity is the velocity at one particular moment. To find it, take the average velocity over a short interval that starts at that moment, then shrink the interval. As the interval gets shorter, the average settles towards a single value, and that limiting value is the instantaneous velocity. Its magnitude is the instantaneous speed, which is what a car's speedometer shows; the speedometer cannot tell you the direction. A radar speed gun measures instantaneous speed, but a journey planner predicting your arrival time uses average speed. From now on, "velocity" on its own means instantaneous velocity.
Worked example: closing in on an instant
A car pulls away so that its position is \(x = (2.0\ \mathrm{m/s^2})\,t^2\). Estimate its velocity at \(t = 3.0\) s, where \(x = 18.0\) m. 1. From 3.0 s to 4.0 s: \(x\) goes from 18.0 to 32.0 m, so \(\bar{v} = 14.0 \div 1.0 = 14.0\) m/s. 2. From 3.0 s to 3.1 s: \(x = 19.22\) m at 3.1 s, so \(\bar{v} = 1.22 \div 0.1 = 12.2\) m/s. 3. From 3.0 s to 3.01 s: \(x = 18.1202\) m, so \(\bar{v} = 0.1202 \div 0.01 = 12.02\) m/s. 4. The averages are closing in on 12 m/s, so the instantaneous velocity at 3.0 s is 12 m/s. 5. Check: the averages fall as the interval shrinks, because the car speeds up during each interval.
Constant velocity
When an object's velocity does not change, its average velocity equals its instantaneous velocity at every moment, and it covers equal displacements in equal times. Its position then changes steadily with time:
Here \(x_0\) is the position at \(t = 0\). A train cruising at a steady 40.0 m/s from \(x_0 = 200\) m is at \(200 + 40.0 \times 15.0 = 800\) m after 15.0 s. Constant velocity means constant speed and constant direction: an object circling a track at a steady speed does not have constant velocity, because its direction keeps changing.
Worked example: an out-and-back drive
A driver goes 12.0 km to a shop at 60.0 km/h and returns along the same road at 40.0 km/h. Find the average speed and average velocity. 1. Time out: \(12.0 \div 60.0 = 0.200\) h. 2. Time back: \(12.0 \div 40.0 = 0.300\) h. 3. Total distance and time: 24.0 km in 0.500 h. 4. Average speed: \(24.0 \div 0.500 = 48.0\) km/h. 5. Average velocity: the car returns to its start, so \(\Delta x = 0\) and \(\bar{v} = 0\). 6. Check: the answer is not 50 km/h, the mean of the two speeds, because the driver spends longer at the slower speed, which pulls the average towards 40.
Units and a feel for speeds
The SI unit of velocity and speed is m/s, but km/h and miles per hour (mph) are common. Useful exact links: \(1\ \mathrm{m/s} = 3.6\ \mathrm{km/h}\), and \(1\ \mathrm{mph} = 0.44704\ \mathrm{m/s}\), so 1 m/s is about 2.24 mph. Some typical sizes: walking is about 1.4 m/s, an elite sprinter about 10 m/s, motorway traffic about 30 m/s (roughly 70 mph), sound in air about 343 m/s at 20 °C, and light \(3.00 \times 10^8\) m/s. Comparing your answer with figures like these is a quick way to catch errors.
Common mistakes to avoid
First, using distance travelled for average velocity, or displacement for average speed. Second, averaging two speeds directly when the times spent at each are different; always divide total distance by total time. Third, dropping the sign of a velocity, which loses its direction. Fourth, thinking a speedometer shows velocity: it shows instantaneous speed only. Fifth, saying an object moving at steady speed round a curve has constant velocity. Sixth, mixing km, m, hours and seconds in one calculation instead of converting first.
Key takeaways
Elapsed time is \(\Delta t = t_f - t_i\). Average velocity is \(\Delta x / \Delta t\): a vector whose sign gives its direction and which depends only on the start and end. Average speed is distance travelled over elapsed time: a scalar, never less than the size of the average velocity, and not found by averaging speeds. Instantaneous velocity is the limit of average velocities over shrinking intervals, and its magnitude is the instantaneous speed a speedometer shows. At constant velocity, \(x = x_0 + vt\). Convert with 1 m/s = 3.6 km/h.
Flashcards
Flashcard
The length of an interval: final time minus initial time
Test your understanding
Question 1 of 5
With east positive, a cyclist moves from x = 120 m to x = 30 m in 15 s. What is her average velocity?
Question 2 of 5
A car travels 30 km at 90 km/h, then a further 30 km at 30 km/h in the same direction. What is its average speed for the whole trip?
Question 3 of 5
A dog runs 20 m to fetch a ball and 20 m back to its owner in a total of 10 s. Which pair is correct?
Question 4 of 5
A car's speed is 25 m/s. What is this in km/h?
Question 5 of 5
What does a car's speedometer display?
