Physics › Section D · Circular motion and gravitation › Topic D.1
Rotation angle, angular velocity, and centripetal acceleration
Wheels, roundabouts, centrifuges and planets all go round in circles. To describe that motion you need angles in radians, a rate of turning, and the surprising fact that anything moving in a circle is always accelerating towards the centre.
Going round in circles
A child on a playground roundabout, a stone whirled on a string, a car on a curved exit ramp and a point on a spinning drill bit all move along circular arcs. The simplest case is uniform circular motion: motion around a circle at constant speed. Yet the object is accelerating the whole time, because velocity is a vector and its direction keeps changing. To find that acceleration, we first need to say how far round the circle something has gone and how quickly it is turning, using a unit better suited to physics than the degree: the radian.
Rotation angle in radians
Let a point travel a distance \(s\) along the edge of a circle of radius \(r\). Its rotation angle in radians is the ratio of that arc to the radius:
A full turn sweeps the circumference, \(2\pi r\), so one revolution is \(2\pi\) rad, or 360°, and one radian is about 57.3°. A radian is a length over a length, so it has no dimensions and the unit rad can be dropped once it has done its job. That makes \(s = r\theta\) so tidy: turn a wheel of radius 2.0 m through 1.5 rad and a point on its rim moves 3.0 m. The formula works only with the angle in radians.
Angular velocity
How fast something turns is its angular velocity, the angle swept per unit time:
Its SI unit is the radian per second, rad/s. Motors and drills are often rated in revolutions per minute, rpm; to convert, multiply by \(2\pi\) rad per revolution and divide by 60 s per minute. The period \(T\) is the time for one revolution, and the frequency \(f = 1/T\) is the number of revolutions per second, in hertz. Since one revolution is \(2\pi\) rad, \(\omega = 2\pi/T = 2\pi f\). Earth turns once in about a day, so \(\omega \approx 7.3 \times 10^{-5}\) rad/s. In this topic ω is a magnitude; later rotation topics give it a sign, positive for anticlockwise turning.
Linking turning to moving
Divide \(s = r\theta\) by the time taken and you link the speed of a point to the rate of turning:
with \(\omega\) in rad/s. Every point on a rigid spinning object has the same \(\omega\), but points farther from the axis trace bigger circles in the same time, so they move faster. Using \(\omega = 2\pi/T\) gives a second form, \(v = 2\pi r/T\): one circumference per period. At every instant the velocity points along the tangent to the circle, at right angles to the radius.
Worked example: a bicycle wheel
A cyclist rides at 6.00 m/s on wheels of radius 0.340 m. Assuming the tyres roll without slipping, find the angular velocity of a wheel in rad/s and rpm, and its period. 1. Rolling without slipping means the tyre lays its own circumference along the road on each turn, so the bike's speed equals the rim speed about the axle: \(v = r\omega\). 2. Rearrange: \(\omega = v/r = 6.00/0.340\), which gives 17.6 rad/s. 3. Convert: \(17.65 \times 60/(2\pi) = 169\) rpm. 4. Period: \(T = 2\pi/\omega = 0.356\) s. 5. Check: in one period the bike should travel one circumference, \(2\pi \times 0.340 = 2.14\) m, and \(6.00 \times 0.356 = 2.14\) m. It does.
Why the acceleration points inwards
In uniform circular motion only the direction of the velocity changes, and that change is an acceleration. Compare the velocity at two points close together on the circle. Both arrows are tangents of the same length, but the second is turned slightly, and the change between them, \(\Delta\vec{v}\), points towards the centre of the circle, wherever you look. So the acceleration of uniform circular motion always points towards the centre. It is called centripetal acceleration, from the Latin for "centre-seeking". Its size is constant, but its direction turns with the object, so it is not a constant vector. Remove whatever causes it and the object carries on along the tangent, not straight outwards.
How big is centripetal acceleration?
The magnitude of the centripetal acceleration is
The two forms agree because \(v = r\omega\), and the unit is m/s², as for any acceleration. The square matters: at the same radius, doubling the speed makes the acceleration four times as large. At the same speed, halving the radius doubles it, which is why a tight bend feels much harsher than a gentle one. On a single spinning object, though, every point shares the same \(\omega\), and the form \(r\omega^2\) shows that points farther out have more acceleration, not less. Choose the form that matches what is being held fixed.
Worked example: a playground roundabout
A roundabout of radius 2.50 m turns once every 5.00 s. Find the speed and centripetal acceleration of a child at its edge. 1. Speed: \(v = 2\pi r/T = 2\pi \times 2.50/5.00\), which gives 3.14 m/s. 2. Acceleration: \(a_c = v^2/r = 3.142^2/2.50 = 3.95\) m/s², directed towards the centre. 3. Check with the other form: \(\omega = 2\pi/5.00 = 1.257\) rad/s, and \(r\omega^2 = 2.50 \times 1.257^2 = 3.95\) m/s². 4. Compare with gravity: \(3.95/9.80 = 0.403\), so about 0.40 g. A second child sitting 1.00 m from the axis shares the same \(\omega\) but has only \(1.00 \times 1.257^2 = 1.58\) m/s².
Worked example: a laboratory centrifuge
A centrifuge spins at 4200 rpm. Find the centripetal acceleration of a sample 10.0 cm from the axis, and compare it with g. 1. Convert: \(\omega = 4200 \times 2\pi/60 = 439.8\) rad/s. 2. The speed is not given, so use the form with ω: \(a_c = r\omega^2 = 0.100 \times 439.8^2\). 3. That gives \(a_c = 1.93 \times 10^4\) m/s². 4. Divide by \(g = 9.80\) m/s² to get about 1970 g. 5. Check by the other route: \(v = r\omega = 43.98\) m/s, and \(v^2/r = 43.98^2/0.100\) gives the same \(1.93 \times 10^4\) m/s². Accelerations this large are why centrifuges separate blood cells from plasma in minutes.
Common mistakes to avoid
First, putting degrees into \(s = r\theta\) or \(v = r\omega\); both need radians. Second, forgetting to convert rpm: 4200 rpm is not 4200 rad/s, nor 70 rad/s, because you must multiply by \(2\pi\) and divide by 60. Third, dropping the square in \(v^2/r\). Fourth, thinking that constant speed means no acceleration, when the velocity is changing direction. Fifth, saying that the acceleration points outwards, or that a released object flies straight outwards; the acceleration points to the centre and a released object leaves along the tangent. Sixth, assuming a bigger radius always means a smaller acceleration: true at fixed speed, but at fixed ω the acceleration grows with radius.
Key takeaways
Uniform circular motion has constant speed but changing velocity. The rotation angle in radians is θ = s/r, with 2π rad in one revolution and 1 rad ≈ 57.3°. Angular velocity ω = Δθ/Δt is measured in rad/s, and ω = 2π/T = 2πf. A point at radius r moves at v = rω = 2πr/T, along the tangent. Its centripetal acceleration points to the centre with magnitude a_c = v²/r = rω². A released object moves off along the tangent.
Flashcards
Flashcard
Motion around a circle at constant speed
Test your understanding
Question 1 of 5
A turntable spins at 45.0 rpm. What is its angular velocity?
Question 2 of 5
A point on a spinning wheel is 0.200 m from the axle, and the wheel turns at 15.0 rad/s. How fast is the point moving?
Question 3 of 5
A car takes a curve of radius 60.0 m at a steady 18.0 m/s. Find the size of its centripetal acceleration.
Question 4 of 5
An object in uniform circular motion keeps the same radius but doubles its speed. What happens to its centripetal acceleration?
Question 5 of 5
A ball whirled in a horizontal circle on a string is let go. In which direction does it move just after release?
