Physics › Section P · Magnetism › Topic P.5
Fields from currents and forces between wires
Every current makes a magnetic field, and the shape of the wire decides the shape of the field. This topic finds the fields of wires, loops and coils, the force one current exerts on another, and how these ideas run an MRI scanner.
Currents make fields
Oersted's compass showed in 1820 that a current produces a magnetic field. The earlier topics in this section used fields to push on currents; this one turns the question round and asks how large a field a given current makes, and in which direction. Three shapes matter most: a long straight wire, a flat circular loop and a long coil called a solenoid. Combining them with the force on a wire then gives the force between two currents, which once defined the ampere.
A long straight wire
Compasses round a long straight wire point in circles centred on the wire. The direction follows the right-hand grip rule, a second rule alongside the force rule: grip the wire with your right hand, thumb along the current, and your fingers curl the way the field circles. The field's strength at distance \(r\) is
where \(\mu_0\), the permeability of free space, is
Double the distance and the field halves. A 10 A current gives \(4.0 \times 10^{-5}\) T at 5.0 cm, comparable with Earth's field, which is why a compass near household wiring can mislead.
Worked example: matching Earth's field
At what distance from a long straight wire carrying 20 A does its field equal Earth's field, \(5.0 \times 10^{-5}\) T? Assume nothing else nearby carries current. 1. Rearrange \(B = \mu_0 I/(2\pi r)\) for \(r\):
2. The \(\pi\) cancels:
or 8.0 cm. 3. Check: at 16 cm, twice as far, the wire's field would be half of Earth's, and \(\mu_0 I/(2\pi r)\) at 0.16 m gives \(2.5 \times 10^{-5}\) T, as expected.
Loops and solenoids
Bend the wire into a flat circular loop of radius \(R\) and the field lines thread through it like those of a short bar magnet. At the centre, for \(N\) turns,
so a 50-turn coil of radius 4.0 cm carrying 3.0 A gives 2.4 mT there. A solenoid is a long coil with many turns. Inside it, away from the ends, the field is strong, uniform and along the axis:
where \(n = N/l\) is the number of turns per metre. Outside, the field is nearly zero. For a loop or coil the grip rule turns round: curl your right fingers with the current, and your thumb points along the field inside, towards the coil's north end.
Worked example: field inside a solenoid
A solenoid 0.50 m long has 1500 turns and carries 4.0 A. Find the field inside it, and the current needed for 1.5 T, a common MRI field. 1. Turns per metre: \(n = 1500/0.50\), which is 3000 per metre. 2. Field:
or 15 mT. 3. The field is proportional to the current, so 1.5 T, 100 times stronger, needs about 400 A. 4. Check: a current that large would overheat ordinary copper wire, which is why MRI magnets use superconducting coils cooled by liquid helium. The radius of the solenoid does not appear, provided it is long compared with its width.
Forces between parallel wires
Two long parallel wires a distance \(r\) apart carry currents \(I_1\) and \(I_2\). Wire 1 makes a field \(\mu_0 I_1/(2\pi r)\) at wire 2, at right angles to it, so a length \(l\) of wire 2 feels \(F = I_2 l B\). The force per unit length is
By Newton's third law wire 1 feels an equal and opposite force. The right-hand rules show that currents in the same direction attract and currents in opposite directions repel. In a lightning bolt or an electric arc, the parallel currents attract, squeezing the arc into a narrow channel, the pinch effect.
Worked example: jump-starting a car
Two long, straight sections of jumper cable lie 2.0 cm apart, carrying 150 A in opposite directions to and from a starter motor. Find the force per metre between them. 1. Substitute:
2. Simplify, using \(\mu_0/(2\pi) = 2 \times 10^{-7}\): \(F/l = 0.23\) N/m. 3. Direction: the currents are opposite, so the cables repel. 4. Check: a tenth of the current in each cable would give a hundredth of the force, because both currents appear in the formula. A quarter of a newton per metre is noticeable but small; currents in power-station busbars are far larger, so they are firmly braced.
Defining the ampere
For many years the force between wires defined the ampere: 1 A was the current that, flowing in two infinitely long parallel wires 1 m apart in a vacuum, gives a force of exactly \(2 \times 10^{-7}\) N per metre of length. That definition made \(\mu_0 = 4\pi \times 10^{-7}\) T·m/A exact. Since 20 May 2019, the SI has instead fixed the elementary charge at exactly 1.602176634 × 10⁻¹⁹ C, and 1 A is the current in which 1 C divided by \(e\), about \(6.24 \times 10^{18}\) elementary charges, pass a point each second. Now \(\mu_0\) is a measured quantity, but it still equals \(4\pi \times 10^{-7}\) T·m/A to better than one part in a billion, so every calculation here is unchanged.
Magnetism in medicine and the lab
An MRI scanner's superconducting solenoid gives a uniform field, usually 1.5 T or 3 T. Hydrogen nuclei, protons, behave as tiny magnets and absorb radio waves at a frequency proportional to the field: about 64 MHz at 1.5 T and 128 MHz at 3 T. Extra gradient coils make the field vary slightly across the body, so each frequency comes from a known slice, and the signals are assembled into images without ionising radiation. The heart and brain make magnetic fields too, about a millionth of Earth's or less, detected with superconducting sensors called SQUIDs. Mass spectrometers, met in the topic on moving charges, steer ions with coil-made fields. Magnetic bracelets sold as cures have no evidence of benefit.
Common mistakes to avoid
First, using \(\mu_0 I/(2\pi r)\) for a loop or a solenoid; each shape has its own formula. Second, using the total number of turns \(N\) in \(B = \mu_0 nI\) instead of turns per metre. Third, leaving \(r\) in centimetres. Fourth, getting the attraction rule backwards: like currents attract, the opposite of like charges. Fifth, using the left hand, or mixing up the force rule and the grip rule: for the field round a straight wire, the thumb follows the current and the fingers curl with the field.
Key takeaways
A long straight wire makes circular field lines, with direction given by gripping it, thumb along the current, and strength B = μ₀I/(2πr), where μ₀ = 4π × 10⁻⁷ T·m/A. At the centre of a flat coil B = μ₀NI/(2R); inside a long solenoid the field is uniform, B = μ₀nI with n turns per metre. Parallel wires exert F/l = μ₀I₁I₂/(2πr) on each other: like currents attract, unlike currents repel. This force once defined the ampere; since 2019 the ampere rests on a fixed value of e. MRI scanners use superconducting solenoids, typically at 1.5 T or 3 T.
Flashcards
Flashcard
Thumb along the current; fingers curl the way the field circles
Test your understanding
Question 1 of 5
What is the magnetic field 4.0 cm from a long straight wire carrying 12 A? (μ₀ = 4π × 10⁻⁷ T·m/A)
Question 2 of 5
A solenoid 0.25 m long has 500 turns and carries 2.0 A. What is the field inside it?
Question 3 of 5
Two long parallel wires 5.0 cm apart carry 30 A and 20 A. What is the force per metre between them?
Question 4 of 5
A long vertical wire carries current upwards. Which way does its magnetic field point at a spot due east of the wire?
Question 5 of 5
How has the definition of the ampere changed since 2019?
