Physics › Section G · Statics, torque, and rotation › Topic G.4

Angular acceleration and rotational kinematics

A drill spinning up, a fan winding down and a car's wheels gathering speed all have changing rates of rotation. Angular acceleration describes that change, and a set of equations you already know from straight-line motion then predicts every turn.

When the spin rate changes

The circular-motion topic dealt with rotation at a steady rate: constant angular velocity \(\omega\). Most real rotations are not steady. A merry-go-round starts from rest as it is pushed, a ceiling fan coasts to a stop when switched off, and a drill reaches full speed a moment after you squeeze the trigger. In each case \(\omega\) changes with time. This topic describes such motion without asking what causes it, which is the job of torque in a later topic. It does so with the same ideas used for motion along a line: position, velocity, acceleration and time, with angles in radians throughout.

Angle and angular velocity, recalled

An object turning about a fixed axis has an angular position \(\theta\) in radians, where one revolution is \(2\pi\) rad. Its angular velocity, \(\omega = \frac{\Delta\theta}{\Delta t}\) in rad/s, measures how fast that angle changes, and a point at radius \(r\) moves along its circle at speed \(v = r\omega\). To convert revolutions per minute, multiply by \(2\pi\) and divide by 60: 180 rpm is 18.8 rad/s. For rotation about a fixed axis we give \(\theta\) and \(\omega\) signs, just as for motion along a line: the usual convention takes anticlockwise as positive and clockwise as negative.

Angular acceleration

Angular acceleration \(\alpha\) measures how quickly the angular velocity changes:

\alpha = \frac{\Delta\omega}{\Delta t}

Its unit is rad/s², often written s⁻² because the radian is a ratio of two lengths. A ceiling fan going from rest to 180 rpm, or 18.8 rad/s, in 6.0 s has \(\alpha = 18.8 \div 6.0 = 3.1\) rad/s². The sign of \(\alpha\) says which way the angular velocity is changing, not whether the object is speeding up. If \(\alpha\) and \(\omega\) have the same sign, the spin is getting faster; if they have opposite signs, it is slowing down, just as with \(a\) and \(v\) in a straight line.

Tangential and centripetal acceleration

When the spin rate changes, each point also speeds up or slows down along its circle. Since \(v = r\omega\) with \(r\) fixed, the tangential acceleration is

a_t = r\alpha

It points along the circle. Every point of a rigid body shares the same \(\alpha\), but points further out have larger \(a_t\). The centripetal acceleration from the circular-motion topic, \(a_c = r\omega^2\), still acts towards the centre; it changes the direction of the velocity, while \(a_t\) changes its size. The two are perpendicular. A wheel that rolls without slipping links rotation to travel along the road: the car moves \(r\theta\), at speed \(r\omega\), with acceleration \(r\alpha\). A car going from 0 to 20 m/s in 8.0 s on 0.30 m wheels gives them \(\alpha = 2.5 \div 0.30 = 8.3\) rad/s².

The rotational kinematic equations

With \(\alpha\) constant, rotation obeys equations exactly like the constant-acceleration equations for a line, with \(\theta\) in place of \(x\), \(\omega\) for \(v\) and \(\alpha\) for \(a\). Take \(\theta_0 = 0\) at the start, so \(\theta\) is the angle turned:

\omega = \omega_0 + \alpha t
\theta = \omega_0 t + \tfrac{1}{2}\alpha t^2
\omega^2 = \omega_0^2 + 2\alpha\theta
\theta = \tfrac{1}{2}(\omega_0 + \omega)t

Each one leaves out one of the four quantities \(\omega\), \(\theta\), \(\alpha\) and \(t\), so you can pick the equation that skips the one you neither know nor need. They follow from the linear versions by dividing each term by \(r\), using \(x = r\theta\), \(v = r\omega\) and \(a_t = r\alpha\).

A strategy for rotation problems

1. Check that the rotation is about a fixed axis with constant angular acceleration; otherwise these equations do not apply. 2. List the knowns and the unknown among \(\omega_0\), \(\omega\), \(\alpha\), \(\theta\) and \(t\), converting rpm to rad/s and revolutions to radians first. 3. Choose the equation that contains only the unknown and known quantities. 4. Substitute with units, keeping signs consistent: a wheel that is slowing has \(\alpha\) opposite in sign to \(\omega\). 5. Convert back if the question wants revolutions, and check that the answer is sensible. For a linear quantity, such as how far a point travels, finish with \(s = r\theta\), \(v = r\omega\) or \(a_t = r\alpha\).

Worked example: a washing machine spin

A washing machine drum of radius 0.25 m speeds up from rest to 1200 rpm in 12.0 s. Assume its angular acceleration is constant. Find \(\alpha\), the number of turns made, and the final rim speed. 1. Convert: \(\omega = 1200 \times \frac{2\pi}{60} = 125.7\) rad/s. 2. \(\alpha = \frac{125.7 - 0}{12.0} = 10.5\) rad/s². 3. Angle:

\theta = \tfrac{1}{2}\alpha t^2 = \tfrac{1}{2}(10.47)(12.0)^2 = 754\ \text{rad}

4. Turns: \(754 \div 2\pi = 120\) revolutions. 5. Rim speed: \(v = r\omega = 0.25 \times 125.7 = 31\) m/s. 6. Check with the average: \(\theta = \frac{1}{2}(0 + 125.7)(12.0) = 754\) rad, in agreement.

Worked example: a potter's wheel coasts

A potter's wheel turning at 12.0 rad/s is switched off and coasts to rest after 8.00 revolutions, with constant angular acceleration. Find \(\alpha\) and the time taken. 1. Convert the angle: \(\theta = 8.00 \times 2\pi = 50.27\) rad. 2. Time is neither known nor needed for \(\alpha\), so use \(\omega^2 = \omega_0^2 + 2\alpha\theta\) with \(\omega = 0\): \(\alpha = -\frac{(12.0)^2}{2(50.27)} = -1.43\) rad/s². 3. Time from the average angular velocity: \(t = \frac{2\theta}{\omega_0 + \omega} = \frac{2(50.27)}{12.0} = 8.38\) s. 4. Check:

\omega = 12.0 - 1.432(8.38) = 0.0\ \text{rad/s}

The negative \(\alpha\) is opposite to \(\omega\), so the wheel slows, as it should.

Common mistakes to avoid

First, putting revolutions or rpm straight into the equations; convert to radians and rad/s first, and convert back only at the end. Second, using degrees in \(s = r\theta\) or \(v = r\omega\), which hold only in radians. Third, losing the sign of \(\alpha\) for a slowing wheel, which leads to a negative stopping time or a negative angle. Fourth, forgetting the \(\tfrac{1}{2}\) in \(\theta = \omega_0 t + \tfrac{1}{2}\alpha t^2\). Fifth, mixing up \(a_t = r\alpha\), which changes a point's speed, with \(a_c = r\omega^2\), which changes its direction. Sixth, using these equations when \(\alpha\) is not constant.

Key takeaways

Angular acceleration is α = Δω/Δt, in rad/s²; when α and ω have the same sign the rotation speeds up, and when they have opposite signs it slows down. A point at radius r has tangential acceleration aₜ = rα along its circle, alongside the centripetal acceleration rω² towards the centre. For constant α, rotation follows the familiar kinematic equations with θ, ω and α replacing x, v and a: ω = ω₀ + αt, θ = ω₀t + ½αt², ω² = ω₀² + 2αθ and θ = ½(ω₀ + ω)t. Work in radians, and link back to linear motion with s = rθ, v = rω and aₜ = rα.

Flashcards

Flashcard

α

Angular acceleration, Δω/Δt

Measured in rad/s².

Test your understanding

Question 1 of 5

A grinder speeds up uniformly from rest to 3000 rpm in 4.0 s. What is its angular acceleration?

Question 2 of 5

A wheel starts from rest with a constant angular acceleration of 4.0 rad/s². How many revolutions does it make in 3.0 s?

Question 3 of 5

A wheel turning at 20 rad/s slows uniformly and stops after turning through 50 rad. What is its angular acceleration?

Question 4 of 5

A rigid disc has an angular acceleration of 12 rad/s². Find the tangential acceleration of a spot on the disc 0.15 m from the axis.

Question 5 of 5

Taking anticlockwise as positive, a wheel has ω = -6.0 rad/s and α = +2.0 rad/s² at one instant. What is it doing?

← Previous topicNext topic →