Statics › Section J · Moments of inertia › Topic J.4
Moments of inertia of composite shapes
Beams, columns and brackets have cross-sections built from rectangles, triangles and circles. Break the section into those parts, shift each part's moment of inertia to a common axis, and add: a tidy table keeps the whole job under control.
Building sections from parts
A T-section is two rectangles. A plate with a bolt hole is a rectangle minus a circle. An I-beam is three rectangles. The topic Centroids of composite parts found the centroid of such shapes by splitting them into simple pieces, and moments of inertia work the same way, because an integral over a whole area is the sum of the integrals over its parts. The only new requirement is that every part's moment of inertia must be taken about the same axis before you add. That is the job of the parallel axis theorem from the previous topic.
The composite area method
For a section made of parts \(1, 2, \ldots, n\), all about one chosen axis,
Here \(\bar{I}_i\) is part \(i\)'s own centroidal moment of inertia about an axis parallel to the chosen one, \(A_i\) is its area, and \(d_i\) is the distance from its centroid to the chosen axis. A hole is a part with negative area: subtract both its \(\bar{I}\) and its \(Ad^2\). For a beam, the chosen axis is usually the horizontal axis through the centroid of the whole section, called the neutral axis, so you must find that centroid first.
Setting out the table
Work in a table with one row per part and these columns: area \(A\), centroid height \(\bar{y}\) above a reference line, the product \(A\bar{y}\), centroidal value \(\bar{I}\), distance \(d = \bar{y} - \bar{Y}\), and the transfer term \(Ad^2\). Fill in the first three columns, then find the section's centroid
Then fill in the rest, add the \(\bar{I}\) column and the \(Ad^2\) column, and the two totals together give \(I\). Keep every length in one unit, usually millimetres, so the answer comes out in \(\mathrm{mm^4}\). The table makes it easy to spot a part whose sign or distance is wrong.
Worked example: a T-section
A T-section has a vertical web 20 mm wide and 100 mm tall, topped by a flange 120 mm wide and 20 mm thick. Find its centroidal moment of inertia about a horizontal axis. Measure \(\bar{y}\) up from the bottom of the web. 1. Web: \(A = 2000\ \mathrm{mm^2}\), \(\bar{y} = 50\) mm, \(\bar{I} = 20(100)^3/12\), or \(1.667 \times 10^6\ \mathrm{mm^4}\). 2. Flange: \(A = 2400\ \mathrm{mm^2}\), \(\bar{y} = 110\) mm, \(\bar{I} = 120(20)^3/12\), or \(0.080 \times 10^6\ \mathrm{mm^4}\). 3. Centroid:
4. Transfer terms: \(2000(32.73)^2 = 2.142 \times 10^6\) and \(2400(27.27)^2 = 1.785 \times 10^6\ \mathrm{mm^4}\). 5. Total: \(I = 5.67 \times 10^6\ \mathrm{mm^4}\).
Checking by a second route
A good check on the T-section is to do it a different way. First find the moment of inertia about the bottom edge, where no centroid is needed: the web gives \(20(100)^3/3 = 6.667 \times 10^6\), the flange gives
and the total is \(35.79 \times 10^6\ \mathrm{mm^4}\). Then run the parallel axis theorem backwards for the whole section:
The answers agree. About the vertical axis of symmetry no transfer is needed at all, since both centroids lie on it:
Worked example: a plate with a hole
A plate 200 mm wide and 120 mm tall has a circular hole of diameter 60 mm, centred 40 mm above its bottom edge. Find \(I_x\) about the bottom edge. 1. Plate: about its base, \(200(120)^3/3 = 115.20 \times 10^6\ \mathrm{mm^4}\). 2. Hole: \(r = 30\) mm, so \(\bar{I} = \pi(30)^4/4 = 0.636 \times 10^6\ \mathrm{mm^4}\) and \(A = \pi(30)^2 = 2827\ \mathrm{mm^2}\). 3. Transfer the hole to the base: \(Ad^2 = 2827(40)^2\), or \(4.524 \times 10^6\ \mathrm{mm^4}\). 4. Subtract the hole's whole contribution:
Check: the hole removes about 12% of the area but under 5% of \(I_x\), because it sits close to the axis.
Worked example: an I-section
An I-section has two flanges 150 mm wide and 20 mm thick, joined by a web 10 mm wide and 200 mm tall, so it is 240 mm deep. By symmetry its centroid is at mid-depth. 1. Web: \(\bar{I} = 10(200)^3/12 = 6.67 \times 10^6\ \mathrm{mm^4}\), with \(d = 0\). 2. Each flange: \(\bar{I} = 0.10 \times 10^6\), \(A = 3000\ \mathrm{mm^2}\) and \(d = 110\) mm, so \(Ad^2 = 36.3 \times 10^6\ \mathrm{mm^4}\). 3. Total, in units of \(10^6\ \mathrm{mm^4}\):
4. Compare a solid 150 mm by 240 mm rectangle: \(172.8 \times 10^6\ \mathrm{mm^4}\) from \(36{,}000\ \mathrm{mm^2}\). The I-section gives 46% of that stiffness with 22% of the material.
Standard steel sections
Engineers rarely work out a rolled steel beam from scratch. Steel makers and design bodies, such as the American Institute of Steel Construction, publish tables for standard sections: wide-flange I-beams, channels, angles, tees and hollow tubes. Each entry lists the depth, the area, the mass or weight per unit length, the centroid position for unsymmetrical shapes, and the centroidal moments of inertia about the horizontal and vertical axes. In a built-up section, such as an I-beam with a plate welded to one flange, each standard part simply becomes one row of the table. You copy its \(A\) and \(\bar{I}\) from the published table and work out its \(d\) as usual.
Common mistakes to avoid
First, adding parts' \(\bar{I}\) values without transferring them to a common axis. Second, measuring each \(d\) from the reference line at the bottom instead of from the section's centroid when the centroidal value is wanted. Third, adding a hole instead of subtracting it, or subtracting only its \(\bar{I}\) and forgetting its \(Ad^2\). Fourth, using the \(\bar{I}\) for the wrong direction, such as \(hb^3/12\) in place of \(bh^3/12\). Fifth, rounding the centroid too early; in the T-section, using 83 mm instead of 82.73 mm shifts every \(d\). Sixth, mixing millimetres and metres within one table.
Key takeaways
Split a composite section into simple parts, and treat holes as parts with negative area. Find the section's centroid with Ȳ = ΣAȳ / ΣA. Then I = Σ(Ī + Ad²), with every part's Ī parallel to the chosen axis and each d measured from that part's centroid to the axis. A table with columns A, ȳ, Aȳ, Ī, d and Ad² keeps the work organised. Check by taking moments of inertia about a convenient edge and shifting back with Ī = I − AȲ². Material far from the neutral axis, as in an I-beam's flanges, gives stiffness for little weight. Published tables supply A and Ī for standard steel sections.
Flashcards
Flashcard
Moment of inertia of a composite section about one axis
Test your understanding
Question 1 of 5
A hollow rectangular tube is 100 mm wide and 150 mm tall outside, with a centred hole 80 mm wide and 130 mm tall. What is its centroidal moment of inertia about the horizontal axis?
Question 2 of 5
How is a circular hole in a plate handled in the table for a composite moment of inertia?
Question 3 of 5
When a composite beam section's I is wanted about its own centroid, each part's distance d must be measured how?
Question 4 of 5
Two plates, each 100 mm wide and 20 mm thick, are glued flat on top of each other to make a 100 mm by 40 mm block. Using the composite method, what is its centroidal moment of inertia about the horizontal axis?
Question 5 of 5
An I-section has two 120 mm by 20 mm flanges with centroids 90 mm from the neutral axis, and a 10 mm by 160 mm web centred on it. What is its centroidal moment of inertia?
