Statics › Section E · Rigid body equilibrium › Topic E.1

Degrees of freedom

Before you can hold a body still, you need to know every way it could move. Counting those independent motions, its degrees of freedom, tells you how many restraints it needs and how many equilibrium equations you can write for it.

Why freedom comes first

A coin on a table can slide two ways and spin flat on the surface. A particle, the idealised point of the section "Equilibrium of particles", can only change its position. A body with size can also change its orientation. Statics is about preventing motion, so the first question for any body is: in how many independent ways could it move? That number, its degrees of freedom, sets up the supports it needs, the reactions they supply and the equations that find them.

What a degree of freedom is

A degree of freedom is one independent number you need to say where a body is and how it is turned. Independent means it can change without forcing any of the others to change. A bead threaded on a straight wire has one degree of freedom: its distance along the wire. A particle free to move anywhere in a plane has two, its coordinates \(x\) and \(y\). A particle in space has three: \(x\), \(y\) and \(z\). For a particle, position is the whole story, because a point has no orientation to describe.

Rigid bodies in a plane: three

A rigid body is one whose points keep fixed distances from one another. Model a flat plate moving in the xy plane. You need the coordinates \(x\) and \(y\) of one reference point on it, plus an angle \(\theta_z\) saying how far it has turned about an axis perpendicular to the plane. That makes three degrees of freedom. A second count confirms it. Two points A and B on the plate fix its position completely, and between them they have four coordinates. But the distance AB cannot change, which removes one, leaving \(4 - 1 = 3\).

Rigid bodies in space: six

In three dimensions a rigid body needs a reference point's coordinates \(x\), \(y\), \(z\) and three angles \(\theta_x\), \(\theta_y\), \(\theta_z\): six degrees of freedom. The point count works here too. Three points that do not lie on one line fix a body in space. They have nine coordinates in total, and the three distances between them are fixed, so \(9 - 3 = 6\). A ship at sea shows all six. It surges forward, sways sideways and heaves up and down, and it also rolls, pitches and yaws.

Describing a small movement

Any small movement of a planar rigid body can be described by two translations of its reference point, \(\Delta x\) and \(\Delta y\), and one rotation about that point, \(\Delta\theta_z\). A ladder sliding down a wall combines all three. In space the list grows to three translations, \(\Delta x\), \(\Delta y\) and \(\Delta z\), and three rotations, \(\Delta\theta_x\), \(\Delta\theta_y\) and \(\Delta\theta_z\). Statics asks the same question about every item on the list: is something stopping this motion?

Restraints remove freedoms

A support works by blocking motions. Each independent motion it blocks is one restraint, and each restraint brings one unknown reaction: a force where it blocks a translation, a couple where it blocks a rotation. A smooth roller blocks one motion, movement perpendicular to the surface it rests on. A pin blocks both translations of a point but lets the body turn, so it removes two degrees of freedom. A fixed support, such as a beam built into a wall, blocks all three. The next topic, "Supports, reactions, and free-body diagrams", sets out each support in detail.

Worked example: restraining a plate

A rectangular plate stands in a vertical plane, with corner A at the bottom left and corner B at the bottom right. Count its remaining freedoms as supports are added. 1. Unsupported, the plate has 3 degrees of freedom: \(\Delta x\), \(\Delta y\) and \(\Delta\theta_z\). 2. Pin corner A to a bracket. The pin stops A translating in either direction, so 1 freedom remains: rotation about A. 3. Rest corner B on a roller on a horizontal floor. The roller stops B moving vertically, and any rotation about A would move B vertically, so the last freedom is gone. 4. Check: 2 restraints from the pin plus 1 from the roller make 3, matching the 3 degrees of freedom.

Worked example: a door on its hinges

A door hangs on two hinges set some distance apart on its vertical edge. How many degrees of freedom does it keep? 1. As a free body in space it has 6. 2. The hinges stop it moving up or down, along the frame, or in and out of the doorway: three translations removed. 3. They also stop it tipping about either horizontal axis, because any such tip would push the two hinges in opposite directions. Two rotations removed. 4. That leaves \(6 - 5 = 1\): rotation about the vertical hinge axis, which is exactly what a door should do. 5. Check against experience: a closed latch adds the sixth restraint, and the door can no longer move at all.

One equation per freedom

Each degree of freedom gives one equilibrium equation, because each possible motion must be balanced separately. A particle in a plane has two, \(\sum F_x = 0\) and \(\sum F_y = 0\). A planar rigid body adds a rotation, so it has three: two force sums and one moment sum. A rigid body in space has six: three force sums and three moment sums. That is why rigid bodies need moment equations that particle problems never did, and why statics can find at most three unknown reactions on a single body in 2D, or six in 3D.

Too few, just enough, too many

Comparing restraints with degrees of freedom gives a first verdict on any support system. With fewer restraints than freedoms, at least one motion is unblocked and the body is unstable, like a shelf resting on a single roller. With equal numbers, suitably arranged, every motion is blocked once and the equilibrium equations find every reaction. With more restraints than freedoms, again suitably arranged, some motions are blocked twice. The body is stable, and often safer, since one support can fail without collapse, but statics alone cannot find all the reactions. The topic "Stability and determinacy" makes these tests precise.

Common mistakes to avoid

First, giving a rigid body only the freedoms of a particle: a planar body has 3, not 2, and a body in space has 6, not 3. Second, counting supports instead of restraints: a pin is one support but removes two freedoms, and a fixed support in 2D removes three. Third, assuming a body at rest has no freedoms. A ball sitting on a level table is not moving, yet nothing stops it rolling. Fourth, treating equal numbers as a guarantee. How the restraints are arranged matters as much as how many there are.

Key takeaways

A degree of freedom is one independent coordinate needed to fix a body's position and orientation. A particle has 2 in a plane and 3 in space. A rigid body has 3 in a plane (two translations and one rotation) and 6 in space (three translations and three rotations). Each restraint blocks one motion and brings one unknown reaction. Each degree of freedom gives one equilibrium equation, so a body in 2D has 3 and a body in 3D has 6. Fewer restraints than freedoms means unstable; more, if well arranged, means stable but beyond statics alone.

Flashcards

Flashcard

Degree of freedom

One independent coordinate needed to fix a body's position or orientation

It can change without forcing the others to change.

Test your understanding

Question 1 of 5

How many degrees of freedom does a rigid body moving in a plane have?

Question 2 of 5

A flat plate in a vertical plane is held only by a pin at one corner. How many degrees of freedom does it still have?

Question 3 of 5

Three points that do not lie on one line fix a rigid body in space. Which count gives its degrees of freedom?

Question 4 of 5

A door hangs on two hinges on its vertical edge, with the latch open. Which motion is it still free to make?

Question 5 of 5

A body has more well-arranged restraints than degrees of freedom. Which statement is true?

← Previous topicNext topic →