Statics › Section J · Moments of inertia › Topic J.1
Integral properties of shapes
A flat shape has more to it than its area. A small family of integrals measures how that area is spread about an axis or a point, and those numbers decide how stiff a beam is and how well a shaft resists twisting.
Properties that belong to the shape
Area and centroid are purely geometric: they belong to the outline of a shape, not to its material. Statics adds a few more such properties, all defined the same way. Chop the shape into tiny pieces of area \(dA\), each at a point \((x, y)\), multiply each piece by some power of its distance from an axis or a point, and add up over the whole area with an integral. Different powers and distances give area, the first moment, the second moment, the polar moment and the product of inertia. This topic defines all five; the rest of the section shows how to calculate and use them.
Area and the first moment
The simplest member of the family is the area itself, \(A = \int_A dA\), in units of length squared. The first moments multiply each piece by its distance from an axis:
Their units are length cubed. You met them in the topic Centroids, where dividing by the area gave the centroid, \(\bar{y} = Q_x / A\) and \(\bar{x} = Q_y / A\). A first moment can be positive, negative or zero, because area below the x axis has negative \(y\). When the centroid lies on an axis, the pieces on either side cancel and the first moment about that axis is exactly zero.
The second moment of area
Square the distance instead and you get the area moment of inertia, also called the second moment of area:
Read the subscript carefully. \(I_x\) is taken about the x axis, so it uses each piece's distance from that axis, which is \(y\). Likewise \(I_y\) uses \(x\). The units are length to the fourth power, such as \(\mathrm{mm^4}\) or \(\mathrm{m^4}\). Because \(1\ \mathrm{m} = 1000\ \mathrm{mm}\), one \(\mathrm{m^4}\) is \(10^{12}\ \mathrm{mm^4}\), so values in millimetres look enormous and values in metres look tiny. Both are normal.
Why the distance is squared
Squaring does two things. First, it makes every contribution positive, since \(y^2 \ge 0\) on both sides of the axis. Pieces on opposite sides add instead of cancelling, so \(I_x\) and \(I_y\) are always positive for any real shape. Second, it rewards distance heavily. A piece twice as far from the axis contributes four times as much; three times as far, nine times as much. Two shapes with equal area can therefore have very different second moments. The one with its area pushed far from the axis has the larger value, and moving a shape away from an axis always increases its second moment about that axis.
Worked example: estimating with strips
A plate 60 mm wide and 40 mm tall has its bottom edge on the x axis. Estimate \(I_x\) with four horizontal strips, then compare with the exact integral. 1. Each strip is 60 mm by 10 mm, so \(\Delta A = 600\ \mathrm{mm^2}\), with mid-heights 5, 15, 25 and 35 mm. 2. Sum \(y^2\,\Delta A\):
3. Exactly, a strip of height \(dy\) has \(dA = 60\,dy\), so
4. Check: the estimate is about 1.6% low, and the top strip alone supplies more than half of it. The same strips give \(Q_x = 600(80) = 48{,}000\ \mathrm{mm^3}\) exactly, equal to \(A\bar{y} = 2400 \times 20\).
The polar moment and the product of inertia
Two more members complete the family. The polar moment of inertia uses the distance \(r\) from a point, usually the origin \(O\):
Since \(r^2 = x^2 + y^2\), it equals \(I_x + I_y\), a link the topic Polar moment of inertia develops for twisting shafts. The product of inertia multiplies the two coordinates:
Both have units of length to the fourth power. Unlike the others, \(I_{xy}\) can be positive, negative or zero. A shape lying entirely in the first quadrant has \(I_{xy} > 0\); one entirely in the second quadrant, where \(x < 0\) and \(y > 0\), has \(I_{xy} < 0\).
Worked example: moving the axis to the centroid
Take the same 60 mm by 40 mm plate first with its lower-left corner at the origin, then centred on the origin. Find \(Q_x\), \(I_x\) and \(I_{xy}\) in each position. 1. Corner at origin: \(Q_x = 48{,}000\ \mathrm{mm^3}\) and \(I_x = 1.280 \times 10^6\ \mathrm{mm^4}\), from the previous card. 2. The product integral separates:
3. Centred, \(y\) runs from \(-20\) to 20 mm, so \(Q_x = 0\) and
4. Every \(x\) has a matching \(-x\), so \(I_{xy} = 0\). Check: \(I_x\) fell to a quarter, the smallest value for any horizontal axis, because the axis now passes through the centroid.
Area moment versus mass moment
The topic Rotational dynamics and moment of inertia in physics defined a moment of inertia \(I = \sum mr^2\), in kg·m², which measures how hard a body is to spin. That is a mass moment of inertia. The quantity here, in \(\mathrm{m^4}\), involves no mass at all: it is a property of a flat outline. Both are casually called "moment of inertia" and both use the letter \(I\), so check the units to tell them apart. The last topic of this section returns to mass moments and shows how the two are connected for a thin plate.
Why engineers care
The second moment of area is the geometric half of a beam's bending stiffness. When a beam bends, the material far from its centroid stretches or squashes most, and that material, weighted by distance squared, does most of the resisting. Bend a plastic ruler flat and it gives easily; on edge it hardly bends, because its width now sits far from the bending axis. The next topic puts a number on that difference. The polar moment does the same job for shafts in torsion.
Common mistakes to avoid
First, swapping the distances: \(I_x\) uses \(y^2\), the distance from the x axis, not \(x^2\). Second, expecting a second moment to cancel like a first moment; \(I_x\) and \(I_y\) can never be negative or zero for a real area, while \(Q_x\), \(Q_y\) and \(I_{xy}\) can. Third, quoting a value with no axis: a moment of inertia means nothing until you say which axis or point it is about. Fourth, confusing area moments in \(\mathrm{m^4}\) with mass moments in kg·m².
Key takeaways
The integral properties of a shape are all built from small areas dA. Area A = ∫dA is in length squared. First moments Qx = ∫y dA and Qy = ∫x dA are in length cubed, give the centroid, and vanish about a centroidal axis. Second moments Ix = ∫y² dA and Iy = ∫x² dA are in length to the fourth, are always positive, and grow with the square of distance, so area far from the axis dominates. The polar moment J_O = ∫r² dA equals Ix + Iy. The product of inertia Ixy = ∫xy dA can take either sign. Area moments (m⁴) are not mass moments (kg·m²).
Flashcards
Flashcard
A tiny piece of area at the point (x, y)
Test your understanding
Question 1 of 5
Which units are correct for the second moment of area of a beam cross-section?
Question 2 of 5
Which of these integral properties of an area can come out negative?
Question 3 of 5
A small patch of area is moved from 30 mm to 60 mm away from the x axis. How does its contribution to Ix change?
Question 4 of 5
A shape's centroid lies exactly on the x axis. What can you say about Qx and Ix?
Question 5 of 5
A plate 50 mm wide and 30 mm tall has its bottom edge on the x axis. Using three horizontal strips 10 mm tall, each placed at its mid-height, estimate Ix.
