Statics › Section H · Internal forces › Topic H.6
The integration method
Triangular, trapezoidal and curved loads produce shear and moment diagrams that geometry struggles with. Writing the load as a function and integrating it twice handles any loading, and the formulas it gives are easy to program.
When geometry runs out
The graphical method relies on rectangles and triangles. A load that grows steadily along the beam, such as soil or water pressure against a wall, makes the shear a parabola and the moment a cubic. Finding where such a shear curve crosses zero, or the area under it, is awkward with geometry alone. The integration method writes the load intensity \(w(x)\) as a function on each segment and integrates it, first to get \(V(x)\) and then to get \(M(x)\). As before, \(w\) is positive downward, positive shear turns an element clockwise, and positive moment is sagging.
The two integrals
On a segment that starts at \(x = a\), the relations from Shear and bending moment diagrams integrate to
The starting values \(V(a)\) and \(M(a)\) play the part of constants of integration. At the left end they come from the support: a pin or roller gives \(V\) equal to its upward reaction and \(M = 0\). At later segments they are the previous segment's end values, adjusted by any jump from a point force or couple at the boundary. So each segment's formulas depend on everything to its left.
Writing the load function
With no load, \(w = 0\). A uniform load is a constant, \(w = w_0\). A linearly varying load is a straight line, \(w = mx + c\), found from the intensities at its two ends. A given curved load is used as stated. Self-weight is a uniform load: a steel beam of mass 50 kg/m adds \(50 \times 9.81 = 490.5\) N/m. Some books count downward loads as negative, so with their convention every \(w\) changes sign; with ours, a downward 6 kN/m is simply \(w = 6\).
Global or local coordinates
A global coordinate \(x\) runs from the left end of the beam for every segment. A local coordinate starts afresh at the left end of each segment, such as \(x' = x - 4\) for a segment beginning at 4 m. Local coordinates usually give simpler load formulas, because the intercept is just the intensity at the start of the segment. Whichever you choose, keep it consistent within a segment and convert back when you report positions along the beam.
Finding the peaks
Because \(dM/dx = V\), the moment has a local maximum or minimum where \(V(x) = 0\) inside a segment. Solve that equation, keep only roots inside the segment's range, and evaluate \(M\) there. Also check the segment ends and any point where a jump takes the shear through zero. The largest shear lies at a segment end or a point load, unless \(w\) itself changes sign. Designers care about the largest magnitudes, whether the sign is positive or negative.
Worked example: a triangular load
A 6 m beam has a pin at A, its left end, and a roller at B, its right end. Its load rises linearly from zero at A to 9 kN/m at B, so \(w = 1.5x\) kN/m. 1. The resultant is \(\tfrac{1}{2}(6)(9) = 27\) kN at 4 m from A, so \(6B = 27(4)\), giving \(B = 18\) kN and \(A = 9\) kN. 2. Shear: \(V = 9 - \int_0^x 1.5x\,dx = 9 - 0.75x^2\) kN. 3. Moment: \(M = \int_0^x V\,dx = 9x - 0.25x^3\) kN·m. 4. Checks: \(V(6) = -18\) kN, matching the roller, and \(M(6) = 0\). 5. Peak: \(V = 0\) at \(x = \sqrt{12} \approx 3.46\) m, so \(M_{max} = 12\sqrt{3} \approx 20.8\) kN·m.
Reading the triangular-load diagrams
The shear is a concave-down parabola. It starts at +9 kN with zero slope, because the load is zero at A, crosses zero at 3.46 m, and falls ever more steeply to −18 kN at B. The moment is a cubic curve, zero at both supports, with its sagging peak of 20.8 kN·m at 3.46 m. That peak sits past mid-span, towards the heavier end of the load. It is slightly larger than the 20.25 kN·m that the same 27 kN would cause if spread uniformly, which is \(WL/8 = 27(6)/8\).
Worked example: two segments
A 9 m beam has a pin at A, its left end, and a roller at B, its right end. It carries 4 kN/m from 0 to 3 m; from 3 m to 9 m the load grows linearly from 4 kN/m to 10 kN/m. 1. Resultants: 12 kN at 1.5 m, and the trapezoid splits into a 24 kN rectangle at 6 m and an 18 kN triangle at 7 m. So \(9B = 18 + 144 + 126 = 288\), giving \(B = 32\) kN and \(A = 54 - 32 = 22\) kN. 2. Segment 1: \(V = 22 - 4x\) and \(M = 22x - 2x^2\), so \(V(3) = 10\) kN and \(M(3) = 48\) kN·m. 3. Segment 2, local \(x' = x - 3\): \(w = 4 + x'\), so
4. Checks: at \(x' = 6\), \(V = -32\) kN, matching the roller, and \(M = 0\).
Finding the two-segment peak
In segment 1 the shear falls from 22 kN to 10 kN without reaching zero, so the moment rises throughout. In segment 2, \(V = 0\) gives \(x'^2 + 8x' - 20 = 0\), with roots \(x' = 2\) and \(x' = -10\). Only \(x' = 2\) lies inside 0 to 6 m, so the peak is at \(x = 5\) m, where \(M = 176/3 \approx 58.7\) kN·m, the largest moment in the beam. Description: \(V\) is a straight line from 22 kN to 10 kN, then a concave-down parabola crossing zero at 5 m and reaching −32 kN at B; \(M\) is a concave-down parabola up to 48 kN·m at 3 m, then a cubic rising to 58.7 kN·m at 5 m and falling to zero at B.
Choosing a method
Each method in this section has its place. A single cut gives the internal forces at one point quickly, for any body. The section cut method gives formulas for every point, segment by segment. The graphical method is fastest for point forces, couples and uniform loads, with built-in checks. The integration method handles any load that can be written as a function, and its formulas are easy to put in a spreadsheet or a short program.
Common mistakes to avoid
First, forgetting the starting values, which leaves out the reactions and earlier loads. Second, skipping a jump at a segment boundary when a point force or couple acts there. Third, writing a local load formula with the global \(x\), or the reverse. Fourth, flipping the sign of \(w\) between conventions. Fifth, accepting a root of \(V = 0\) outside its segment. Sixth, not checking that the final shear and moment match the right-hand support.
Key takeaways
Write w(x) on each segment, then integrate: V(x) = V(a) − ∫w dx and M(x) = M(a) + ∫V dx. Starting values come from the left support or the previous segment, adjusted for any jump. Local coordinates simplify load formulas. A linear load gives parabolic shear and cubic moment. Peak moments occur where V = 0 inside a segment, or at ends and jumps. Always check the final values against the right-hand support.
Flashcards
Flashcard
Integrate w(x) to get V(x), then integrate V(x) to get M(x)
Test your understanding
Question 1 of 5
A 6 m simply supported beam carries w = 1.5x kN/m (downward), and V = 9 kN just right of the left support. What is V(x)?
Question 2 of 5
On a segment starting at x = 0, V(x) = 12 − 3x² kN and M(0) = 0. What is M(x)?
Question 3 of 5
A segment runs from x = 2 m to x = 6 m, and its downward load falls linearly from 8 kN/m to zero. Using the local coordinate x′ = x − 2, what is w?
Question 4 of 5
Using the integration method, how do you locate the largest bending moment on a beam?
Question 5 of 5
At x = 3 m the segment-1 formulas give V = 10 kN and M = 48 kN·m, and a 15 kN downward point load also acts at x = 3 m. What are the starting values for segment 2?
