Statics › Section D · Moments and static equivalence › Topic D.1
The moment of a force
A force can push a body along and also tend to turn it. The turning tendency, called the moment, depends on how far the force's line of action lies from the point in question, and it is the second quantity, after force, that every rigid-body problem must balance.
The turning effect of a force
Push a door near its handle and it swings easily; push with the same force near the hinges and it barely moves. A force acting on a body tends to do two things: translate it in the direction of the force and rotate it about some axis. Particles, with all their forces meeting at one point, only ever needed the first effect. Rigid bodies need the second as well. The physics topic "The two conditions for equilibrium" called this turning effect torque, with \(\tau = rF\sin\theta\). In statics nothing actually rotates, but the tendency is still there, and it must be balanced.
Moment or torque?
Engineers call the turning tendency of a force about a chosen point the moment of the force, or simply the moment. The chosen point is the moment centre: picture it as the place where an axis of rotation pierces the page. In engineering the word torque is often kept for a moment about the long axis of a shaft, bolt or pipe, the kind that twists it. The quantity and its units are the same either way; the difference is only in how the word is used. When a mechanic tightens a wheel nut, the wrench applies a moment to the nut, and that moment is a torque on the stud.
Magnitude: force times moment arm
The magnitude of a moment about point O is
where \(d_\perp\), the moment arm, is the perpendicular distance from O to the force's line of action. Moments have units of force times distance: newton metres (N·m) or kN·m in SI, and lb·ft or lb·in in US customary units. A magnitude is never negative. Two consequences follow at once. A force whose line of action passes through O has zero moment about O, however large it is. And sliding a force along its own line of action leaves both F and \(d_\perp\) unchanged, so its moment is unchanged.
Finding the moment arm
The moment arm is rarely given directly. Often you know the distance r from O to the point where the force is applied and the angle \(\theta\) between that line and the force. The perpendicular dropped from O to the line of action completes a right triangle with r as its hypotenuse, so \(d_\perp = r\sin\theta\) and
The moment is greatest when the force is at right angles to r, where \(\sin\theta = 1\), and zero when the force points straight towards or away from O. That is why you pull a spanner at right angles to its handle.
Worked example: a spanner at an angle
A mechanic pulls with 120 N on the end of a spanner, 0.25 m from the centre of the bolt, but the pull makes 70° with the handle instead of 90°. Find the moment about the bolt. 1. The moment arm is \(d_\perp = 0.25\sin 70^\circ = 0.235\) m. 2. \(M = 120 \times 0.235 = 28.2\) N·m. 3. Compare a perpendicular pull: \(120 \times 0.25 = 30.0\) N·m. 4. Check: the angled pull loses only about 6%, because \(\sin 70^\circ = 0.94\) is close to 1. At 30° to the handle the same pull would give only 15.0 N·m.
Direction in two dimensions
In a plane, a moment turns either clockwise or counterclockwise (anticlockwise) about the moment centre, and it is drawn as a curved arrow. As a vector it points along the axis of rotation, perpendicular to the page, with its sense given by the right-hand rule: curl the fingers of your right hand in the direction of turning, and your thumb points along the moment vector. With x to the right and y up, a counterclockwise moment points out of the page, along +k, and a clockwise one into it, along −k. This course takes counterclockwise as positive. The sense depends on the point: one force can turn clockwise about one point and counterclockwise about another.
Direction in three dimensions
In space a moment can point in any direction, but the rule is the same: it lies along the axis of the turning, perpendicular to the plane that contains the force and the position vector r, drawn from the moment centre to any point on the force's line of action. One way to find its sense is to point your right index finger along r and your middle finger along F; your thumb then points along the moment. Curved arrows become unclear in three dimensions, so moments are drawn as straight arrows, often with a double head. The next topics show how to compute them with components.
Worked example: a leaning pole
A 3.0 m pole is hinged at its base A and leans to the right at 60° above the horizontal, so its top is 1.5 m to the right of A and 2.598 m above it. A guy rope pulls the top horizontally to the left with 250 N, and a 40 kg lantern, weighing 392.4 N, hangs from the top. Find each force's moment about A. 1. The rope's line is horizontal, so its moment arm is the top's height: \(250 \times 2.598 = 650\) N·m, counterclockwise. 2. The weight's line is vertical, so its arm is the top's horizontal distance: \(392.4 \times 1.5 = 589\) N·m, clockwise. 3. Check: both forces act at the same point, yet their arms differ, because each arm is measured to a different line of action.
Levers multiply force
Because a moment is force times arm, a small force on a long arm can match a large force on a short one. A claw hammer pulling a nail pivots on its head. If your hand pulls at right angles to the handle 0.30 m from the pivot, and the nail's line of action passes 0.04 m from it, then holding the nail requires the two moments about the pivot to be equal: \(F_{nail}(0.04) = 150(0.30)\) for a 150 N pull, so the nail feels 1,125 N. Pry bars, wheel braces and bolt cutters all work this way, and a torque wrench lets a mechanic apply a specified moment to a bolt.
Common mistakes to avoid
First, using the distance to the point of application instead of the perpendicular distance to the line of action. Second, using \(\cos\theta\) where \(\sin\theta\) belongs; check that a force pointing straight at the centre gives zero. Third, forgetting the direction: a moment is incomplete without clockwise or counterclockwise, or its vector sense. Fourth, assuming a large force always has a large moment; one through the centre has none. Fifth, mixing units, such as newtons with millimetres, without converting.
Key takeaways
The moment of a force about a point measures its tendency to turn a body about that point. Its magnitude is M = F d⊥, the force times the perpendicular distance from the point to its line of action, or F r sin θ, in N·m. A force through the point has no moment, and sliding a force along its line does not change its moment. In 2D, moments are clockwise or counterclockwise, with counterclockwise positive and along +k by the right-hand rule. In 3D, the moment vector is perpendicular to the plane of r and F.
Flashcards
Flashcard
The tendency of a force to turn a body about a point or axis
Test your understanding
Question 1 of 5
A 60 N force acts at right angles to a spanner, 0.45 m from the bolt. What is the moment about the bolt?
Question 2 of 5
A 200 N force acts at the end of a 0.40 m handle, at 30° to the handle. What is the moment about the pivot?
Question 3 of 5
A 500 N force has a line of action that passes through the centre of a bolt. What is its moment about the bolt?
Question 4 of 5
With x to the right and y up, which way does the vector of a counterclockwise moment in the xy-plane point?
Question 5 of 5
A 2.0 m pole hinged at its base leans at 60° above the horizontal. A horizontal 100 N force acts at its top. What is the magnitude of its moment about the base?
