Statics › Section C · Equilibrium of particles › Topic C.4

3D particle equilibrium

Real cables, guy wires and tripod legs rarely lie in one plane. In three dimensions a particle gives three equilibrium equations, and the forces are written from the coordinates of the points they run between.

Three equations in space

Every principle from planar equilibrium still holds in three dimensions; there is simply one more direction. The vector condition \(\sum \mathbf{F} = \mathbf{0}\) becomes

\sum F_x = 0, \qquad \sum F_y = 0, \qquad \sum F_z = 0

so a particle in space can be solved for up to three unknowns. The harder part is usually the geometry: a three-dimensional situation drawn on flat paper is easy to misread. Neat, labelled diagrams and careful bookkeeping of coordinates matter more here than anywhere else in this section.

A right-handed frame

Three mutually perpendicular axes must form a right-handed set. Point the fingers of your right hand along positive x and curl them towards positive y; your thumb then points along positive z. A left-handed frame silently flips signs and leads to wrong answers later, especially when moments arrive. In this topic x and y are horizontal and z points vertically up, so weights act in the negative z direction. Some books put y vertical instead. Any right-handed choice works, provided you state it on the diagram and keep it.

Writing a force from two points

Most 3D forces are cables or struts whose ends have known coordinates. If a force of magnitude F acts along the line from point A towards point B, form the position vector \(\mathbf{r}_{AB} = B - A\), tip minus tail, and its length by three-dimensional Pythagoras. Then

\mathbf{F} = F\,\frac{\mathbf{r}_{AB}}{|\mathbf{r}_{AB}|}

The fraction is the unit vector along the line, as in "Unit vectors and forces along a line". For a cable tension, the force on the particle points from the particle towards the anchor, because a cable pulls.

Direction cosines

The components of the unit vector are the direction cosines of the line, the cosines of its angles with the positive axes: \(\cos\theta_x = r_x/r\), and likewise for y and z. So \(F_x = F\cos\theta_x\), and similarly for the other two components. Because the unit vector has length 1,

\cos^2\theta_x + \cos^2\theta_y + \cos^2\theta_z = 1

Knowing two direction angles therefore fixes the cosine of the third, up to its sign. The topic "3D vectors and direction angles" developed these angles; here they turn geometry into force components.

The procedure

1. Isolate the particle and draw its FBD with right-handed axes, usually with the origin at the particle. 2. List the coordinates of every point that fixes a line of action. 3. Write each force as its magnitude, known or unknown, times a unit vector. 4. Write the three scalar equations and count the unknowns: no more than three. 5. Solve. If one equation contains only two unknowns, substitution is quick; otherwise write the system in matrix form and use a calculator or software. 6. Substitute back into all three equations.

Worked example: a crate on three cables

A 50 kg crate hangs below ring A at the origin. Cables run from A to anchors B(−2, −3, 6), C(3, −2, 6) and D(0, 4, 3), in metres. Find the tensions. 1. Lengths: AB = 7, AC = 7 and AD = 5 m; the weight is \(50(9.81) = 490.5\) N down. 2. Equations:

-\tfrac{2}{7}T_B + \tfrac{3}{7}T_C = 0
-\tfrac{3}{7}T_B - \tfrac{2}{7}T_C + 0.8T_D = 0
\tfrac{6}{7}T_B + \tfrac{6}{7}T_C + 0.6T_D = 490.5

3. The first gives \(T_B = 1.5T_C\); the second then gives \(T_D = 1.161T_C\). 4. The third becomes \(2.839T_C = 490.5\), so \(T_C = 173\) N, \(T_B = 259\) N and \(T_D = 201\) N. 5. Check: all positive, so every cable pulls.

Solving the system

Three simultaneous equations look daunting, but the structure of the problem often helps. In the crate example the x equation contained only two tensions, which gave a ratio straight away, and each later substitution removed another unknown. When every equation contains every unknown, write the system as a matrix equation, coefficients times the vector of unknowns equals the vector of known loads, and solve it with a calculator's matrix function or software such as a spreadsheet. Then check your solution in all three original equations, not just the last one you used.

Worked example: a camera tripod

A tripod's apex P is at (0, 0, 2.4) m and its feet at A(1.0, 0, 0), B(−0.6, 0.8, 0) and C(−0.6, −0.8, 0); each leg is 2.6 m long. The apex carries a 30 kg camera, 294.3 N down, and a cable pulls it horizontally with 40 N in the +x direction. Each light, pinned leg is a two-force member; assume compression, pushing on P from its foot. 1. y equation: \(0.8(F_C - F_B)/2.6 = 0\), so \(F_B = F_C = F\). 2. x equation: \((-F_A + 1.2F)/2.6 + 40 = 0\), so \(F_A = 1.2F + 104\). 3. z equation: \(2.4(F_A + 2F)/2.6 = 294.3\), so \(F_A + 2F = 318.8\). 4. Hence \(F = 67.1\) N and \(F_A = 185\) N, all compressive.

Zeros and symmetry help

Look for simplifications before writing anything. A force lying in a coordinate plane has a zero component, and its direction angle with the missing axis is 90°. An equation containing a single unknown can be solved on its own. Symmetry can remove unknowns entirely: in the tripod, legs B and C were mirror images across the xz-plane and the loads were symmetric too, so they carried equal forces and the y equation confirmed it. If an assumed compression comes out negative, the member is in tension instead; for a cable, a negative tension means no cable can hold the particle there: it would have to push.

Common mistakes to avoid

First, writing the position vector tail minus tip, which reverses every component of the force. Second, forgetting to divide by the length, so the force is multiplied by a distance. Third, using a left-handed set of axes. Fourth, taking the anchor's coordinates as the force components without forming B − A when the particle is not at the origin. Fifth, mixing up which way a strut pushes; draw it pointing from the foot towards the particle for compression. Sixth, checking the solution in only one equation.

Key takeaways

A particle in space satisfies ΣFx = 0, ΣFy = 0 and ΣFz = 0, enough for three unknowns, using a right-handed frame. Write each force as its magnitude times the unit vector along its line, from the position vector tip minus tail divided by its length. The unit vector's components are direction cosines, whose squares add to 1. Solve by substitution when an equation has fewer unknowns, otherwise by matrix methods, and check in all three equations. Zeros and symmetry shorten the work; a negative strut force means tension.

Flashcards

Flashcard

ΣFx = ΣFy = ΣFz = 0

Equilibrium of a particle in three dimensions

Up to three unknowns.

Test your understanding

Question 1 of 5

A cable runs from a ring at A(0, 0, 0) to an anchor at B(2, −3, 6) m, with a tension of 700 N. What is the cable's force on the ring?

Question 2 of 5

A line has cos θx = 0.6 and cos θy = 0, and it points upwards. What is cos θz?

Question 3 of 5

What is the length of the position vector ⟨3, 4, 12⟩ m?

Question 4 of 5

In a tripod problem you assumed every leg is in compression, and one leg force comes out as −20 N. What does this mean?

Question 5 of 5

A ring at the origin is held by a cable to D(0, 4, 3) m with a tension of 200 N. What is the z-component of that cable's force on the ring?

← Previous topicNext topic →