Statics › Section C · Equilibrium of particles › Topic C.3

2D particle equilibrium

Cables holding a sign, a rope pulling a box up a ramp, a line sagging under a load: when the forces on a particle lie in one plane, two equations find two unknowns. This topic shows three ways to solve them and how to choose axes that make the algebra short.

Two equations in a plane

When all the forces on a particle lie in one plane, the vector condition for equilibrium becomes two scalar equations:

\sum F_x = 0, \qquad \sum F_y = 0

They can fix at most two unknowns, which may be magnitudes, angles, or one of each. Three methods solve the same physics: components, which always works; a force triangle drawn to scale; and trigonometry on that triangle. Engineers pick whichever is quickest for the problem in front of them, and often use a second method to check the first.

The component method

1. Draw the free-body diagram and choose axes. 2. Resolve each force into x and y components with right-angle trigonometry, as in "2D vectors and components", giving each component its sign from the diagram. 3. Write \(\sum F_x = 0\) and \(\sum F_y = 0\). 4. Count the unknowns: no more than two. 5. Solve, simultaneously if both unknowns appear in both equations. 6. Substitute the answers back, and ask whether each one is sensible: cables in tension, contact forces pushing.

Worked example: a lamp on two cables

A 25 kg lamp hangs from ring A. Cable AB runs up and to the left at 25° above the horizontal; cable AC runs up and to the right at 60° above the horizontal. 1. The weight is \(W = 25(9.81) = 245.25\) N, straight down. 2. With x to the right and y up:

-T_{AB}\cos 25^\circ + T_{AC}\cos 60^\circ = 0
T_{AB}\sin 25^\circ + T_{AC}\sin 60^\circ = 245.25

3. The first equation gives \(T_{AC} = 1.813\,T_{AB}\). 4. Substituting, \(T_{AB}(0.4226 + 1.570) = 245.25\), so \(T_{AB} = 123\) N and \(T_{AC} = 223\) N. 5. Check: the steeper cable carries more of the load, as it should.

The force triangle

When exactly three forces hold a particle in equilibrium, they add to zero, so drawn tip to tail they close into a triangle. Drawn carefully to scale, by hand or in CAD, the triangle gives the unknown sides directly; a hand drawing is good to about two significant figures, which makes it a useful check. More often you find the triangle's angles from the geometry and solve it using the law of sines, or of cosines when two sides and their angle are known. For the lamp, the interior angles are 85° opposite W, 30° opposite \(T_{AB}\) and 65° opposite \(T_{AC}\).

Lami's theorem

The law of sines applied to the force triangle gives a neat rule for three concurrent forces in equilibrium, called Lami's theorem:

\frac{F_1}{\sin\alpha_1} = \frac{F_2}{\sin\alpha_2} = \frac{F_3}{\sin\alpha_3}

Here \(\alpha_1\) is the angle between \(F_2\) and \(F_3\), measured tail to tail, and so on. For the lamp, the cables are 95° apart, so \(245.25/\sin 95^\circ = 246.2\) N. Then \(T_{AB} = 246.2\sin 150^\circ = 123\) N and \(T_{AC} = 246.2\sin 115^\circ = 223\) N, matching the component method. It applies only to exactly three forces.

Choosing axes wisely

Axes need not be horizontal and vertical. If you align one axis perpendicular to an unknown force, that force has no component along the axis and drops out of that equation, so you can solve for the other unknown directly, with no simultaneous equations. On an incline, axes along and perpendicular to the slope usually do this, because the normal force is perpendicular to the slope. The answers are the same whichever axes you use; only the amount of algebra changes.

Worked example: a box on a smooth slope

A 60 kg box rests on a smooth slope inclined at 25°. A rope pulls it up the slope at 15° above the slope's surface. Find the tension T and the normal force N. 1. The weight is \(W = 60(9.81) = 588.6\) N. 2. Take x′ up the slope and y′ perpendicular to it, so N has no x′ component. 3. Along the slope, \(T\cos 15^\circ = W\sin 25^\circ\), so \(T = 258\) N. 4. Perpendicular to it, \(N = W\cos 25^\circ - T\sin 15^\circ\), which is \(533.4 - 66.7 = 467\) N. 5. Check: N is positive, so the slope pushes, and it is less than \(W\cos 25^\circ\) because the rope lifts slightly. With the rope parallel to the slope, the same steps give \(T = W\sin 25^\circ\) and \(N = W\cos 25^\circ\).

Shallow cables carry huge tensions

Hang a weight W from the midpoint of a cable whose two halves each dip at angle \(\theta\) below the horizontal. By symmetry the two tensions are equal, and \(\sum F_y = 0\) gives \(2T\sin\theta = W\), so

T = \frac{W}{2\sin\theta}

At 30° the tension equals W; at 10° it is 2.88W; at 3° it is 9.55W. As the cable is pulled straighter, the tension grows without limit. That is why a loaded washing line or zip wire can never be perfectly straight, and why its anchors must be strong.

Several particles at once

Some systems contain two or more connected particles, such as two rings joined by a cable. Draw an FBD of each. The force in the shared cable appears on both diagrams, equal and opposite by Newton's third law, and it is the link between them. Start with the particle that has only two unknowns, solve it, then carry the shared force to the next. If a particle still seems to have too many unknowns, look for extra information: a rope over an ideal pulley has the same tension on both sides.

Common mistakes to avoid

First, swapping sine and cosine: check whether each angle is measured from the horizontal or the vertical before resolving. Second, losing signs: a force pointing left has a negative x component wherever it acts. Third, forgetting that a smooth surface pushes perpendicular to itself, not vertically. Fourth, using Lami's theorem when four or more forces act. Fifth, trying to solve three unknowns with two equations instead of looking for the missing fact. Sixth, skipping the substitution check, which catches most arithmetic slips.

Key takeaways

A planar particle in equilibrium satisfies two scalar equations, enough for two unknowns. The component method always works; for exactly three forces, the force triangle, the law of sines and Lami's theorem give quick solutions or checks. Aligning an axis perpendicular to an unknown removes it from one equation, so incline problems use axes along and across the slope. A load at the middle of a cable needs a tension of W/(2 sin θ), which becomes enormous at shallow angles. Connected particles share a force that links their diagrams.

Flashcards

Flashcard

ΣFx = 0 and ΣFy = 0

The equilibrium equations for a particle in a plane

Enough for at most two unknowns.

Test your understanding

Question 1 of 5

A 50 kg climber hangs from the midpoint of a rope whose halves each dip 20° below the horizontal. What is the tension in each half? Use g = 9.81 m/s².

Question 2 of 5

A 40 kg box is held at rest on a smooth 30° slope by a rope parallel to the slope. What is the rope tension? Use g = 9.81 m/s².

Question 3 of 5

Three concurrent forces hold a ring in equilibrium. Drawn tip to tail, what do they form?

Question 4 of 5

Why are axes along and perpendicular to a smooth incline usually the best choice?

Question 5 of 5

A ring carries a 300 N weight and is held by a horizontal cable and a second cable at 40° above the horizontal. What is the tension in the angled cable?

← Previous topicNext topic →