Statics › Section E · Rigid body equilibrium › Topic E.5
3D rigid body equilibrium
Signs on brackets, plates hung from cables and booms braced to walls all need the full six equations of equilibrium. The ideas are the same as in 2D; what changes is that forces and moments are handled as vectors.
Why go to three dimensions
A 2D model works when every force lies in one plane. Many real objects break that rule: a street sign on an L-shaped arm caught by a side wind, a shelf held by cables running back to a wall at different angles, a crane boom braced by two guy cables. These bodies can move in all six ways, so in general they need six restraints and six equations. The principles have not changed: draw a free-body diagram, write the equilibrium conditions, solve. But visualising distances and directions is harder, and there can be up to six unknowns at once, so a careful, systematic method matters more than ever.
Six equations in vector form
For a body in space,
each give three scalar equations, six in all, so at most six unknown reactions can be found. In 3D, unit vectors take over from angles for describing direction. A cable from A to B with tension \(T\) pulls on the body at A with
as in "Unit vectors and forces along a line". Moments come from cross products, \(\mathbf{M}_O = \mathbf{r} \times \mathbf{F}\), where \(\mathbf{r}\) runs from O to any point on the force's line of action, as in "Moments in 3D and about an axis".
A method for 3D problems
1. Draw the free-body diagram, replacing each support with its 3D reactions. 2. Write every force as a Cartesian vector, using unit vectors for cables and angled forces. 3. Choose a moment centre that as many unknown forces as possible pass through, such as a ball-and-socket joint, so they drop out of the moment equations. 4. Compute each \(\mathbf{r} \times \mathbf{F}\) and add the components of any couples. 5. Collect the \(\mathbf{i}\), \(\mathbf{j}\) and \(\mathbf{k}\) terms into six scalar equations and solve. 6. As in 2D, a negative value means that reaction acts opposite to the direction assumed.
Worked example: a plate on three cables
A horizontal plate, 2.0 m along x by 1.2 m along y, weighs 600 N at its centre (1.0, 0.6) m. A 300 N box sits at (1.6, 0.9) m. Vertical cables hold it at A (0, 0), B (2.0, 0) and C (1.0, 1.2), with z upward. 1. All forces are parallel to z, so \(\sum F_x\), \(\sum F_y\) and \(\sum M_z\) vanish automatically; three equations remain. 2. Moments about the x axis through A, using \(M_x = yF_z\): \(1.2T_C - 0.6(600) - 0.9(300) = 0\), so \(T_C = 525\) N. 3. About the y axis, \(M_y = -xF_z\): \(-2T_B - 1.0(525) + 600 + 1.6(300) = 0\), so \(T_B = 277.5\) N. 4. \(\sum F_z = 0\): \(T_A = 900 - 525 - 277.5 = 97.5\) N. All positive, so every cable is taut.
Worked example: a fixed sign arm
A horizontal pipe is welded at O to a wall lying in the yz plane, with z up. It runs 2 m along x to B, then turns and runs 1 m along y to its end C at (2, 1, 0) m. A lamp at C applies \(\mathbf{F} = (-120, 0, -500)\) N, its weight plus a wind load. 1. The fixed support gives a force \(\mathbf{R}\) and a couple \(\mathbf{M}\): six unknowns. 2. Forces: \(\mathbf{R} + \mathbf{F} = \mathbf{0}\), so \(\mathbf{R} = (120, 0, 500)\) N. 3. Moment of the load about O: \(\mathbf{r}_{OC} \times \mathbf{F} = (-500, 1000, 120)\) N·m. 4. Moments: \(\mathbf{M} + \mathbf{r}_{OC} \times \mathbf{F} = \mathbf{0}\), so \(\mathbf{M} = (500, -1000, -120)\) N·m. 5. Check one term by hand: the 500 N weight acts 2 m out along x, giving 1000 N·m about y, matching.
Worked example: a boom and two cables
A boom OA lies along x from a ball-and-socket joint O on a wall in the yz plane to A (4, 0, 0) m, carrying 6 kN downward (−z) at A. Cables run from A to wall anchors B (0, −2, 4) m and C (0, 4, 2) m. 1. Both cables are 6 m long, so \(\mathbf{u}_{AB} = (-4, -2, 4)/6\) and \(\mathbf{u}_{AC} = (-4, 4, 2)/6\). 2. Unknowns: \(O_x\), \(O_y\), \(O_z\), \(T_B\), \(T_C\). 3. All forces at A act at \(\mathbf{r} = (4, 0, 0)\), so \(\mathbf{r} \times \mathbf{F}\) has no x part. 4. \(\sum M_z = 0\): \(-\frac{2}{6}T_B + \frac{4}{6}T_C = 0\), so \(T_B = 2T_C\). 5. \(\sum M_y = 0\): \(\frac{4}{6}T_B + \frac{2}{6}T_C = 6\), so \(T_C = 3.6\) kN and \(T_B = 7.2\) kN. 6. Forces: \(\mathbf{O} = (7.2, 0, 0)\) kN, pure compression along the boom.
Why the boom has five unknowns
The boom has only five unknowns, yet six equations. Every force on it passes through the boom's own axis, the line OA, so the moment about that axis, \(\sum M_x\), is zero automatically and gives no information. Five useful equations meet five unknowns. Nothing stops the boom spinning about its own length, but no load tries to turn it that way, so equilibrium holds. Its result also confirms a shortcut: a member loaded only at its two ends carries its force along the line joining them. Such cases, where a body is held in some directions but not others, return in "Stability and determinacy".
Available but not engaged in 3D
In 3D, supports often provide couples that equilibrium never calls on. A shaft carried in two well-aligned journal bearings could, in principle, receive two couples at each bearing as well as two forces. But the forces at two separated bearings already resist every tilting moment, so the couples stay unengaged and are left off the free-body diagram. The same holds for a door on two hinges. Including them would create more unknowns than the six equations can find. So when a body has several aligned bearings or hinges, model each one with reaction forces only.
Solving with linear algebra
Six equations in six unknowns can be tedious by substitution. Arrange them as \(A\mathbf{x} = \mathbf{b}\), with the reactions in \(\mathbf{x}\), and let software do the elimination; a library such as Python's NumPy solves the boom problem in one line. This works because the unknowns appear linearly: magnitudes multiplied by known unit-vector components and known distances. An unknown angle would sit inside sines and cosines and break that linearity. Even when software does the algebra, the free-body diagram and the vectors are yours, and so is the check.
Common mistakes to avoid
First, using a position vector that does not run from the moment centre to a point on the force's line of action. Second, reversing the cross product: \(\mathbf{F} \times \mathbf{r}\) flips every sign. Third, writing a cable's unit vector from the anchor to the body instead of from the body to the anchor, which makes the cable push. Fourth, forgetting the couple components at a fixed support, or adding couples at aligned bearings that are not engaged. Fifth, expecting six useful equations when some, like the boom's \(\sum M_x\), are automatically zero.
Key takeaways
A 3D rigid body needs \(\sum \mathbf{F} = \mathbf{0}\) and \(\sum \mathbf{M} = \mathbf{0}\): six scalar equations, so at most six unknowns. Write forces as vectors, with cable directions from unit vectors, and moments as \(\mathbf{r} \times \mathbf{F}\). Take moments about a point many unknowns pass through. Parallel force systems reduce to three equations. A fixed support supplies a force and a couple that cancel the loads' resultant and moment. Aligned bearings and hinges are modelled with forces only. Large systems are solved with matrices.
Flashcards
Flashcard
ΣF = 0 and ΣM = 0: six scalar equations
Test your understanding
Question 1 of 5
At most, how many unknown reactions can the equilibrium equations find for one rigid body in 3D?
Question 2 of 5
A horizontal plate hangs from vertical cables at A (0, 0), B (2, 0) and C (0, 2) m. A 900 N load acts at (0.5, 0.5) m; ignore the plate's weight. What is the tension at A?
Question 3 of 5
A cable pulls on a body at A (0, 0, 0) towards an anchor at B (2, −3, 6) m with a tension of 700 N. What is the force vector?
Question 4 of 5
A load F = (0, 0, −400) N acts at r = (1.5, 0, 0) m from a fixed support at the origin. What reaction couple must the support supply?
Question 5 of 5
A shaft runs in two well-aligned journal bearings. How are the bearings normally modelled on the free-body diagram?
