Statics › Section D · Moments and static equivalence › Topic D.3

Varignon's theorem

Finding a perpendicular distance by geometry can mean awkward triangles. Varignon's theorem offers a better route: break the force into components whose moment arms you can read straight off the drawing, and add their moments.

Why another method

The definition \(M = Fd_\perp\) is simple, but the moment arm is often hard to find. When a force acts at an angle at the end of a bent bracket, the perpendicular from the moment centre to the line of action may fall somewhere awkward, and finding it needs extra construction lines and trigonometry. Drawings, however, usually give horizontal and vertical dimensions. If the force is split into horizontal and vertical components, each component's moment arm is one of those given dimensions. The theorem that makes this legitimate is named after Varignon.

The theorem

Pierre Varignon (1654 to 1722), a French mathematician, published the result in 1687. It says that a force's moment about any point is the sum of the moments of its components about that same point. Read the other way, the moments of several concurrent forces add up to the moment of their resultant. In vector form it is the distributive property of the cross product, met in "Cross products":

\mathbf{r} \times (\mathbf{F}_1 + \mathbf{F}_2) = \mathbf{r} \times \mathbf{F}_1 + \mathbf{r} \times \mathbf{F}_2

The components can point in any directions you like; two choices are especially useful.

Parallel and perpendicular components

Suppose a force F acts at the end of a bar of length d from the moment centre O, at angle \(\theta\) to the bar. Split F into a component along the bar, \(F_\parallel = F\cos\theta\), and one at right angles to it, \(F_\perp = F\sin\theta\). The parallel component's line passes through O, so its moment is zero. Only the perpendicular one turns the bar, giving

M = F_\perp d = Fd\sin\theta

This is exactly \(Fd_\perp\), since \(d_\perp = d\sin\theta\). The two views are the same product, grouped differently: shrink the force, or shrink the arm.

Worked example: a tilted handle

A lever handle 0.60 m long is pinned at its lower end A and rises to the right at 30° above the horizontal. A hand pushes straight down on its upper end with 80 N. Find the moment about A. 1. The force is vertical and the handle is 30° above horizontal, so the force makes 60° with the handle. 2. The component perpendicular to the handle is \(F_\perp = 80\sin 60^\circ = 69.3\) N; the parallel component points along the handle towards A and gives nothing. 3. \(M_A = 69.3 \times 0.60 = 41.6\) N·m, clockwise, since the push turns the handle downwards. 4. Check: the horizontal distance to the line of action is \(0.60\cos 30^\circ = 0.520\) m, and \(80 \times 0.520 = 41.6\) N·m.

Horizontal and vertical components

The second useful choice splits F into \(F_x\) and \(F_y\). The horizontal component's moment arm is the vertical distance \(d_y\) from O to the point of application, and the vertical component's arm is the horizontal distance \(d_x\). Then

M_O = \pm F_x d_y \pm F_y d_x

Each sign is set separately, by asking which way that component alone would turn the body about O: plus for counterclockwise, minus for clockwise. A component can turn the body one way while the other component turns it the opposite way, and the resultant moment may then be small.

A formula that does the signs

Put O at the origin and let the force act at the point (x, y), with signed components \(F_x\) and \(F_y\). Then

M_O = xF_y - yF_x

This is the z-component of \(\mathbf{r} \times \mathbf{F}\) for vectors in the plane, so it carries the counterclockwise-positive convention automatically. The minus sign has a plain meaning: a force pointing right, acting above O, turns the body clockwise. Use signed coordinates and signed components, and the formula sorts out every sense for you. It is the quickest method whenever coordinates are known.

Worked example: a 600 N pull

A 600 N force acts at B(2.5, 1.2) m, pointing up and to the left at 40° above the horizontal. Find its moment about the origin O. 1. Components: \(F_x = -600\cos 40^\circ = -459.6\) N and \(F_y = 600\sin 40^\circ = 385.7\) N. 2. By inspection: \(F_y\) acts up, 2.5 m to the right of O, so it gives \(+964.2\) N·m; \(F_x\) acts left, 1.2 m above O, which also turns counterclockwise: \(+551.6\) N·m. 3. Total: \(M_O = 1516\) N·m, counterclockwise. 4. Formula check: \(2.5(385.7) - 1.2(-459.6) = 1516\). 5. The moment arm follows: \(d_\perp = 1516/600 = 2.53\) m, far easier than finding it by geometry.

Slide the force first

A force can be moved anywhere along its own line without altering its moment, so you may move it to any convenient point on that line before applying Varignon's theorem. A good choice is where the line crosses a coordinate axis through O. There, one component passes through O and contributes nothing. The 600 N force's line crosses the x-axis at x = 3.93 m, so its moment is \(3.93 \times 385.7 = 1516\) N·m, the same as before, using just one term. This principle of transmissibility is one of the safe moves explored in "Moving forces: force-couple systems".

Common mistakes to avoid

First, pairing each component with the wrong distance: horizontal components need vertical distances, and vertical components need horizontal ones. Second, giving both terms the same sign without checking each sense separately. Third, in the formula, forgetting that a force pointing left or down has a negative component. Fourth, swapping sine and cosine when splitting a force into parts along and across a bar. Fifth, sliding a force to a point that is not on its line of action, which changes its moment.

Key takeaways

Varignon's theorem, published by Pierre Varignon in 1687, states that the moment of a force equals the sum of the moments of its components, and that concurrent forces have the same total moment as their resultant. Split a force along and across a bar to get M = F⊥d = Fd sin θ, or into horizontal and vertical parts, each multiplied by the other direction's distance and signed by its own sense. With coordinates, M = xFy − yFx gives the signs automatically. Sliding a force along its line to an axis crossing removes a term. All the methods give the same answer.

Flashcards

Flashcard

Varignon's theorem

The moment of a force equals the sum of the moments of its components

About the same point.

Test your understanding

Question 1 of 5

A force F = ⟨300, 400⟩ N acts at the point (2, 1) m. What is its moment about the origin?

Question 2 of 5

A 50 N force acts at the end of a 0.40 m bar, at 60° to the bar. What is its moment about the bar's pinned end?

Question 3 of 5

Which statement is Varignon's theorem?

Question 4 of 5

A force with components ⟨100, −200⟩ N acts at the point (3, 0) m. What is its moment about the origin?

Question 5 of 5

A force with Fx = 80 N and Fy = −150 N has a line of action that crosses the x-axis at x = 2 m. What is its moment about the origin?

← Previous topicNext topic →